CA WTB 4x4 shock mount bracket needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1960chevypanel · 01-02-2019, 02:15 AM

Looking for a front left shock mount bracket for a '60-'62 4x4 (see pic). Please post or PM with any leads.

j.kirn · 01-03-2019, 12:55 AM

Have seen that on a lot of 60-62 shock mounts like that, why not clean up that weld? Never understood the reason for the pin like that for shock

1960chevypanel · 01-03-2019, 01:20 AM

Yeah that's probably why they got rid of it in '63.. Like to find a clean one if I can.

**paulspickupparts** · 01-04-2019, 09:21 PM

I could be wrong but that really looks like the upper from 55-59 Chevy Pickups. without measuring might be wrong but might be worth checking out.

1960chevypanel · 01-04-2019, 10:34 PM

Makes sense, this is 60-62 so could be carried over from 59.

**paulspickupparts** · 01-08-2019, 06:36 PM

I have one from a 55-59 . Have pics on my phone if you pm. $35. They are a mess to get off. Price reflects laying on back with torch. Thanks

1960chevypanel · 01-09-2019, 01:52 AM

Awesome, thanks Paul. Been there/done that with the torch and rivets, I appreciate it

PM on the way.

**paulspickupparts** · 01-10-2019, 09:49 AM

Sent pics of bracket to your phone. Will get off today and send you measurements . Thanks

1960chevypanel · 01-18-2019, 03:14 PM

'59-down turned out to be different, still looking. Bump

1960chevypanel · 03-29-2019, 01:56 PM

Ttt

1960chevypanel · 04-29-2019, 04:59 PM

Bump

1960chevypanel · 06-18-2019, 12:06 PM

Ttt

**SmirchIs#1** · 06-30-2019, 10:19 AM

Quote:

Originally Posted by 1960chevypanel

'59-down turned out to be different, still looking. Bump

I have one on a 61' K-20.Sure looks like a lot of work.Want are you thinking for price?you Prob. should call. Dennis in upstate NY 518-234-2480 or 518-528-2646 cell

1960chevypanel · 06-30-2019, 08:40 PM

Thanks Dennis I'll be in touch

1960chevypanel · 11-24-2019, 12:37 PM

Bump, still looking

Brad54 · 11-24-2019, 02:17 PM

That's stamped steel, not cast, right?
Why not cut it back apart, through the weld, then re-weld it correctly, and reinforce/gusset it while your'e there?
If you're going to remove it from the frame anyway, unless you're going to re-rivet it, it won't be "concours correct," so you could weld a half-round of tubing to the back of it, and we'd the ends of the tubing to the bottom side of the frame rail, and make it really strong. (I'll be doing that on my '62 K10 frame...)

01-03-2019, 12:55 AM	#2
j.kirn Registered User Join Date: Jun 2006 Location: MO. Posts: 970	Re: WTB 4x4 shock mount bracket needed Have seen that on a lot of 60-62 shock mounts like that, why not clean up that weld? Never understood the reason for the pin like that for shock

01-03-2019, 01:20 AM	#3
1960chevypanel Registered User Join Date: Aug 2010 Location: Southern CA Posts: 1,605	Re: WTB 4x4 shock mount bracket needed Yeah that's probably why they got rid of it in '63.. Like to find a clean one if I can.

01-04-2019, 09:21 PM	#4
paulspickupparts Senior Member Join Date: Sep 2011 Location: Seward Nebraska Posts: 1,596	Re: WTB 4x4 shock mount bracket needed I could be wrong but that really looks like the upper from 55-59 Chevy Pickups. without measuring might be wrong but might be worth checking out.

01-04-2019, 10:34 PM	#5
1960chevypanel Registered User Join Date: Aug 2010 Location: Southern CA Posts: 1,605	Re: WTB 4x4 shock mount bracket needed Makes sense, this is 60-62 so could be carried over from 59.

01-08-2019, 06:36 PM	#6
paulspickupparts Senior Member Join Date: Sep 2011 Location: Seward Nebraska Posts: 1,596	Re: WTB 4x4 shock mount bracket needed I have one from a 55-59 . Have pics on my phone if you pm. $35. They are a mess to get off. Price reflects laying on back with torch. Thanks

01-02-2019, 02:15 AM	#1
1960chevypanel Registered User Join Date: Aug 2010 Location: Southern CA Posts: 1,605	WTB 4x4 shock mount bracket needed Looking for a front left shock mount bracket for a '60-'62 4x4 (see pic). Please post or PM with any leads. Attached Images Last edited by 1960chevypanel; 01-02-2019 at 10:21 PM.

01-09-2019, 01:52 AM	#7
1960chevypanel Registered User Join Date: Aug 2010 Location: Southern CA Posts: 1,605	Re: WTB 4x4 shock mount bracket needed Awesome, thanks Paul. Been there/done that with the torch and rivets, I appreciate it PM on the way.

01-10-2019, 09:49 AM	#8
paulspickupparts Senior Member Join Date: Sep 2011 Location: Seward Nebraska Posts: 1,596	Re: WTB 4x4 shock mount bracket needed Sent pics of bracket to your phone. Will get off today and send you measurements . Thanks

01-18-2019, 03:14 PM	#9
1960chevypanel Registered User Join Date: Aug 2010 Location: Southern CA Posts: 1,605	Re: WTB 4x4 shock mount bracket needed '59-down turned out to be different, still looking. Bump

03-29-2019, 01:56 PM	#10
1960chevypanel Registered User Join Date: Aug 2010 Location: Southern CA Posts: 1,605	Re: WTB 4x4 shock mount bracket needed Ttt

04-29-2019, 04:59 PM	#11
1960chevypanel Registered User Join Date: Aug 2010 Location: Southern CA Posts: 1,605	Re: WTB 4x4 shock mount bracket needed Bump

06-18-2019, 12:06 PM	#12
1960chevypanel Registered User Join Date: Aug 2010 Location: Southern CA Posts: 1,605	Re: WTB 4x4 shock mount bracket needed Ttt

06-30-2019, 08:40 PM	#14
1960chevypanel Registered User Join Date: Aug 2010 Location: Southern CA Posts: 1,605	Re: WTB 4x4 shock mount bracket needed Thanks Dennis I'll be in touch

11-24-2019, 12:37 PM	#15
1960chevypanel Registered User Join Date: Aug 2010 Location: Southern CA Posts: 1,605	Re: WTB 4x4 shock mount bracket needed Bump, still looking

11-24-2019, 02:17 PM	#16
Brad54 Registered User Join Date: Aug 2006 Location: Athens, Georgia Posts: 1,456	Re: WTB 4x4 shock mount bracket needed That's stamped steel, not cast, right? Why not cut it back apart, through the weld, then re-weld it correctly, and reinforce/gusset it while your'e there? If you're going to remove it from the frame anyway, unless you're going to re-rivet it, it won't be "concours correct," so you could weld a half-round of tubing to the back of it, and we'd the ends of the tubing to the bottom side of the frame rail, and make it really strong. (I'll be doing that on my '62 K10 frame...) __________________ '61 Suburban daily driver: off the road due to 180-pound 8-pt buck! '62 K-10 long-step project '61 C30 Camper, aka "Valdez" There's no cool like Old School



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.