ls swap problems - The 1947 - Present Chevrolet & GMC Truck Message Board Network

04ls1gto · 05-19-2019, 12:12 PM

swapped a 6.0/6l90 into my 71 suburban and it was trouble free for a few months of driving last year. I installed a AAW chassis wiring kit and now the gas pedal keeps dying. Thought the first pedal was just bad so I got one from PSI conversions who made the swap harness. Same thing, made it half a mile and it died. Any input on what to check?

04ls1gto · 05-19-2019, 04:04 PM

Quote:

Originally Posted by 04ls1gto

swapped a 6.0/6l90 into my 71 suburban and it was trouble free for a few months of driving last year. I installed a AAW chassis wiring kit and now the gas pedal keeps dying. Thought the first pedal was just bad so I got one from PSI conversions who made the swap harness. Same thing, made it half a mile and it died. Any input on what to check?

a little more investigating and it seams ECU is tossing a PO606 code which is disabling pedal, clear the code and pedal works fine. Ill be calling tuner tomorrow to see if he can take a look

87chevy.com · 05-19-2019, 10:15 PM

Check wire between pedal before you go to the tuner. Ohm it end to end and check for shorts

77c10bowtie · 05-20-2019, 10:49 AM

double check all of your grounds also, you said everything was working find until you swapped the body harness, id start there. loose grounds are notorious for being a big issue on GM trucks and cars

04ls1gto · 05-25-2019, 08:38 PM

Back in business, after some trouble shooting we loaded Corvette maps in and it runs great. No idea how it ran for the past few months without issue but I'll take it

05-19-2019, 12:12 PM	#1
04ls1gto Registered User Join Date: Aug 2014 Location: Portsmouth ri Posts: 363	ls swap problems swapped a 6.0/6l90 into my 71 suburban and it was trouble free for a few months of driving last year. I installed a AAW chassis wiring kit and now the gas pedal keeps dying. Thought the first pedal was just bad so I got one from PSI conversions who made the swap harness. Same thing, made it half a mile and it died. Any input on what to check?

05-19-2019, 10:15 PM	#3
87chevy.com BMW & ASE Master Certified Join Date: Feb 2004 Location: Houston, Texas Posts: 1,255	Re: ls swap problems Check wire between pedal before you go to the tuner. Ohm it end to end and check for shorts __________________ 1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes 1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD A poor man buy's it twice finally got my domain name back, 87chevy.com.... site rework in progress

05-20-2019, 10:49 AM	#4
77c10bowtie Registered User Join Date: Dec 2018 Location: Goodyear, AZ Posts: 59	Re: ls swap problems double check all of your grounds also, you said everything was working find until you swapped the body harness, id start there. loose grounds are notorious for being a big issue on GM trucks and cars __________________ 77 SWB 2wd. gutted, caged, slicks, not weighed yet 02 Duramax CCSB 4x4 12.7@104 6750lbs

05-25-2019, 08:38 PM	#5
04ls1gto Registered User Join Date: Aug 2014 Location: Portsmouth ri Posts: 363	Re: ls swap problems Back in business, after some trouble shooting we loaded Corvette maps in and it runs great. No idea how it ran for the past few months without issue but I'll take it



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.