"DOORED" my truck this weekend - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevydog66 · 02-27-2006, 02:50 AM

Stop being such a nice guy, and work on your own vehicle!! Sweeeet lookin truck, though!!

FnLow69 · 03-06-2006, 04:13 PM

Any progress on this wanna see it layin door on 22's gunna look killler....your truck was my inperation(sp?) to stock floor bodydrop mine to the rockers....

camaro__thunder · 03-07-2006, 12:04 AM

Just got done switching jobs... Now I can work on it again($$)! The firewall hasnt happened yet. Will post more pics on the 10th. with the rim and tire combo even if it wont fit in the front lol

in the 3rd pic the rear is up at ride height

FnLow69 · 03-13-2006, 11:21 PM

just noticed the pics looks so awsome... got any with the 22's yet. by the way what kinda smoothies are they?

steveo10 · 03-13-2006, 11:54 PM

you are building my dream. looks killer

camaro__thunder · 03-17-2006, 03:40 AM

The firewall will be done this weekend... need to get some more $$ for tires now, I am getting the underdash brake setup first, and it's expensive!

FnLow69 · 03-20-2006, 02:50 PM

do you have any problems with the bascspacing on those centerline wheels i was looking at those but in 20's but was told the backspacing was to much....

Chevy_68 · 03-21-2006, 01:19 AM

Looking good man I have my entire firewall shaved as well!, as for SIXTY8c10 i'll try to post some progress pics of my truck 4 ya n sorry it took so long to respond just hardly been getting on, but i got tons of new pics so yeah. my bad though.

bagged81 · 03-27-2006, 10:01 PM

Here is a question. It may be stupid, but I am going to ask it anyway, haha. I am not sure how similar out trucks are but my bumper is level with the bottom of my rocker panel. Right now, I have 3" spindles and a 4.5" Z on my frame sitting in my garage and the bumper is 1/2" off the ground and the rocker will sit flat. If I wanted to cut the rockers off (red area) so that the doors layed on the ground, then what do I do about the bumper area (circled with ?)? Would I have to cut say 3.5" (height of the rocker) off the bottom of the bumper? Did you run into this?

camaro__thunder · 03-27-2006, 11:36 PM

new pics this week for sure.... been working Overtime @ work l

The bumper area: I am just going to drag the bumper FLAT on mine.

bagged81 · 03-28-2006, 07:50 AM

Ok, I reread your original post.

camaro__thunder · 03-30-2006, 01:22 PM

Heres some new pics FINALLY!
Like the crossmember and upper control arm rework ? I cant run 15" rims with my new lowers either they touch the rim with spindles.
I still have to drill the hole for the column, and wait for the underdash brakes to get here.

XXL · 03-30-2006, 03:10 PM

Quote:

Originally Posted by camaro__thunder

Heres some new pics FINALLY!

Are you getting enough oxygen sitting up that high in the air?

camaro__thunder · 03-30-2006, 07:05 PM

Hey its only 4' 2" How tall is yours?

When/if I do finally decide to chop the top it will be under 4'

hotrodhomi · 03-30-2006, 11:32 PM

Please don't chop the top. It looks good as it is.

FnLow69 · 03-31-2006, 12:16 AM

looks badass bro... are the BYC upper and lower arms? cant wait to see the 22's.....

camaro__thunder · 03-31-2006, 10:39 AM

Thats a NO on the control arms... they are one-offs

I am however selling the BYC LCA'S for $100 you would just need to make a center Shaft, get bushings and balljoints.

FnLow69 · 03-31-2006, 11:30 AM

ok the arms look sweet, i went with ART UCA and LCA.

bagged81 · 03-31-2006, 02:27 PM

Is that motor going to fit under the stock hood?

Quote:

Originally Posted by hotrodhomi

Please don't chop the top. It looks good as it is.

Ditto.

camaro__thunder · 04-01-2006, 02:21 AM

With the way it was the carb held the hood up alone... If I can manage ground clearance I will lower the motor some. thanks guys!

**FRENCHBLUE72** · 04-01-2006, 08:59 AM

Any idea how the hood will fit?????? Looks like it will be sitting on top of the tires??

dwcsr · 04-01-2006, 10:58 PM

Now would be the time to put in the rack if your still thinking about it.
I just re-did my to eliminate the possibility of bump steer.

FnLow69 · 05-04-2006, 12:49 AM

any update????

7deuce · 05-14-2006, 09:30 PM

See what you started....lol[IMG]

[/IMG]

7deuce · 05-14-2006, 09:31 PM

02-27-2006, 02:50 AM	#51
chevydog66 GM ONLY BABY!!! Join Date: Oct 2003 Location: Fort Wayne, IN. Posts: 1,998	Re: "DOORED" my truck this weekend Stop being such a nice guy, and work on your own vehicle!! Sweeeet lookin truck, though!! __________________ 2 wrongs don't make a right, but 3 lefts do. 66 Chevelle Malibu 406ci, 573hp, 10.99@121mph 96 Chevy Silverado Z71 72 GMC 1500 Super Custom LS 6.0/4L65 on airride http://www.cardomain.com/ride/707879...mc-c-k-pick-up

03-06-2006, 04:13 PM	#52
FnLow69 Registered User Join Date: May 2005 Location: Washington Posts: 848	Re: "DOORED" my truck this weekend Any progress on this wanna see it layin door on 22's gunna look killler....your truck was my inperation(sp?) to stock floor bodydrop mine to the rockers.... __________________ [PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean

03-07-2006, 12:04 AM	#53
camaro__thunder Epoxy Primer Friendly Join Date: Feb 2004 Location: South of Houston TEXXXAS Posts: 680	Re: "DOORED" my truck this weekend Just got done switching jobs... Now I can work on it again($$)! The firewall hasnt happened yet. Will post more pics on the 10th. with the rim and tire combo even if it wont fit in the front lol in the 3rd pic the rear is up at ride height Attached Images __________________ My Project 69 SWB SHAVED BAGGED DOORED Last edited by camaro__thunder; 03-09-2006 at 02:46 PM.

03-13-2006, 11:21 PM	#54
FnLow69 Registered User Join Date: May 2005 Location: Washington Posts: 848	Re: "DOORED" my truck this weekend just noticed the pics looks so awsome... got any with the 22's yet. by the way what kinda smoothies are they? __________________ [PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean

03-13-2006, 11:54 PM	#55
steveo10 Registered User Join Date: Jan 2006 Location: central indiana Posts: 128	Re: "DOORED" my truck this weekend you are building my dream. looks killer

03-17-2006, 03:40 AM	#56
camaro__thunder Epoxy Primer Friendly Join Date: Feb 2004 Location: South of Houston TEXXXAS Posts: 680	Re: "DOORED" my truck this weekend The firewall will be done this weekend... need to get some more $$ for tires now, I am getting the underdash brake setup first, and it's expensive! __________________ My Project 69 SWB SHAVED BAGGED DOORED Last edited by camaro__thunder; 03-17-2006 at 03:41 AM.

03-20-2006, 02:50 PM	#57
FnLow69 Registered User Join Date: May 2005 Location: Washington Posts: 848	Re: "DOORED" my truck this weekend do you have any problems with the bascspacing on those centerline wheels i was looking at those but in 20's but was told the backspacing was to much.... __________________ [PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean

03-21-2006, 01:19 AM	#58
Chevy_68 Registered User Join Date: Mar 2002 Location: PHX Az Posts: 155	Re: "DOORED" my truck this weekend Looking good man I have my entire firewall shaved as well!, as for SIXTY8c10 i'll try to post some progress pics of my truck 4 ya n sorry it took so long to respond just hardly been getting on, but i got tons of new pics so yeah. my bad though.

03-27-2006, 10:01 PM	#59
bagged81 Signals in the bumper. Join Date: Feb 2003 Location: East TN Posts: 856	Re: "DOORED" my truck this weekend Here is a question. It may be stupid, but I am going to ask it anyway, haha. I am not sure how similar out trucks are but my bumper is level with the bottom of my rocker panel. Right now, I have 3" spindles and a 4.5" Z on my frame sitting in my garage and the bumper is 1/2" off the ground and the rocker will sit flat. If I wanted to cut the rockers off (red area) so that the doors layed on the ground, then what do I do about the bumper area (circled with ?)? Would I have to cut say 3.5" (height of the rocker) off the bottom of the bumper? Did you run into this? Attached Images __________________ Jeff C. 1981 Chevrolet Silverado - Under major construction...again. link 1962 Chevrolet Impala 4D Sedan moredoorclassics.com 1936 Ford Pickup - Frame-off in progress link 1979 Chevrolet Camper Special Flatbed link

03-27-2006, 11:36 PM	#60
camaro__thunder Epoxy Primer Friendly Join Date: Feb 2004 Location: South of Houston TEXXXAS Posts: 680	Re: "DOORED" my truck this weekend new pics this week for sure.... been working Overtime @ work l The bumper area: I am just going to drag the bumper FLAT on mine. __________________ My Project 69 SWB SHAVED BAGGED DOORED Last edited by camaro__thunder; 03-27-2006 at 11:38 PM.

03-28-2006, 07:50 AM	#61
bagged81 Signals in the bumper. Join Date: Feb 2003 Location: East TN Posts: 856	Re: "DOORED" my truck this weekend Ok, I reread your original post. __________________ Jeff C. 1981 Chevrolet Silverado - Under major construction...again. link 1962 Chevrolet Impala 4D Sedan moredoorclassics.com 1936 Ford Pickup - Frame-off in progress link 1979 Chevrolet Camper Special Flatbed link Last edited by bagged81; 03-28-2006 at 07:53 AM.

03-30-2006, 01:22 PM	#62
camaro__thunder Epoxy Primer Friendly Join Date: Feb 2004 Location: South of Houston TEXXXAS Posts: 680	Re: "DOORED" my truck this weekend Heres some new pics FINALLY! Like the crossmember and upper control arm rework ? I cant run 15" rims with my new lowers either they touch the rim with spindles. I still have to drill the hole for the column, and wait for the underdash brakes to get here. Attached Images __________________ My Project 69 SWB SHAVED BAGGED DOORED

03-30-2006, 07:05 PM	#64
camaro__thunder Epoxy Primer Friendly Join Date: Feb 2004 Location: South of Houston TEXXXAS Posts: 680	Re: "DOORED" my truck this weekend Hey its only 4' 2" How tall is yours? When/if I do finally decide to chop the top it will be under 4' __________________ My Project 69 SWB SHAVED BAGGED DOORED

03-30-2006, 11:32 PM	#65
hotrodhomi Registered User Join Date: Apr 2004 Location: Sacramento Posts: 3,737	Re: "DOORED" my truck this weekend Please don't chop the top. It looks good as it is. __________________ '72 2wd blazer, bagged w/ watts link & EDC '72 C10 "Lowered Farm Truck" STOLEN 5-18-11 '66 impala ht

03-31-2006, 12:16 AM	#66
FnLow69 Registered User Join Date: May 2005 Location: Washington Posts: 848	Re: "DOORED" my truck this weekend looks badass bro... are the BYC upper and lower arms? cant wait to see the 22's..... __________________ [PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean



Register or Log In To remove these advertisements.

03-31-2006, 10:39 AM	#67
camaro__thunder Epoxy Primer Friendly Join Date: Feb 2004 Location: South of Houston TEXXXAS Posts: 680	Re: "DOORED" my truck this weekend Thats a NO on the control arms... they are one-offs I am however selling the BYC LCA'S for $100 you would just need to make a center Shaft, get bushings and balljoints. __________________ My Project 69 SWB SHAVED BAGGED DOORED

03-31-2006, 11:30 AM	#68
FnLow69 Registered User Join Date: May 2005 Location: Washington Posts: 848	Re: "DOORED" my truck this weekend ok the arms look sweet, i went with ART UCA and LCA. __________________ [PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean

04-01-2006, 02:21 AM	#70
camaro__thunder Epoxy Primer Friendly Join Date: Feb 2004 Location: South of Houston TEXXXAS Posts: 680	Re: "DOORED" my truck this weekend With the way it was the carb held the hood up alone... If I can manage ground clearance I will lower the motor some. thanks guys! __________________ My Project 69 SWB SHAVED BAGGED DOORED

04-01-2006, 08:59 AM	#71
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,589	Re: "DOORED" my truck this weekend Any idea how the hood will fit?????? Looks like it will be sitting on top of the tires?? __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

04-01-2006, 10:58 PM	#72
dwcsr Hollister Road Co. Join Date: Apr 2005 Location: Houston Posts: 6,134	Re: "DOORED" my truck this weekend Now would be the time to put in the rack if your still thinking about it. I just re-did my to eliminate the possibility of bump steer.

05-04-2006, 12:49 AM	#73
FnLow69 Registered User Join Date: May 2005 Location: Washington Posts: 848	Re: "DOORED" my truck this weekend any update???? __________________ [PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean

05-14-2006, 09:30 PM	#74
7deuce Sold! 2 days after finished Join Date: Oct 2005 Location: Ohio Posts: 327	Re: "DOORED" my truck this weekend See what you started....lol[IMG][/IMG]

05-14-2006, 09:31 PM	#75
7deuce Sold! 2 days after finished Join Date: Oct 2005 Location: Ohio Posts: 327	Re: "DOORED" my truck this weekend

Register or Log In To remove these advertisements.