1973 Cheyenne Super 10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jchav62 · 03-16-2009, 03:11 PM

I never really started a build thread on this truck so here's one that goes back to the beginning and brings us to now...

I found this truck on a Craigslist ad that said "Make Offer". The truck was at a house that was about to be foreclosed in Las Vegas, Nevada. Most people would have looked away from this truck. Not me. I contacted the guy and got the truck for $200 in February of 2008. So we took a roadtrip...

Turns out this ugly truck had a few very cool things about it. It has a 350 in it, but after checking the VIN number, it came stock with a 454. Pretty cool for a half ton shortbed. It also has a factory tach, th400, and a posi 3.73(I later discovered 3.42's) rearend. Someday I would like to put a 454 back in her.

jchav62 · 03-16-2009, 03:19 PM

We got the truck home (actually my brother-in-law's house) and the first thing I did was cleaned out the garbage and replaced some body parts. The truck came with another set of front fenders that were decent so I put them in primer and bolted them on. I was able to score a cherry hood from the junkyard for $30...did the same with that. I also found a nice front bumper. My brother-in-law gave me a nice chrome grille. I also ordered a few parts from LMC, new headlight bezels, and grille surround. My buddy Danny freshened up the fender emblems for me.

jchav62 · 03-16-2009, 03:29 PM

The 350 in the truck had been sitting for a long long time without an air cleaner or thermostat housing. A few parts had been taken off. I took the valve covers and intake off to inspect the upper internals. Turns out everything looked very clean and it had some pretty nice parts in there. The heads appear that they were built for racing...fancy studs, big rockers, guide plates, beefy push rods. The intake valley had been coated. Everything looked good. I cleaned everything and went back with some used parts that I scored. An Edelbrock Performer intake, HEI distributor, quadrajet, and some chrome valve covers. After installing all the parts and cleaning the fuel system, I put in a battery and it fired up! Runs pretty healthy. I wasn't sure at first, but she lived!

jchav62 · 03-16-2009, 03:34 PM

Next thing was the bed. It had the common rust that these early squarebody's are known for. I was involved in a three way bed trade with my brothers in law. I still had to get mine "fixed" before I could swap it though. Fred hooked me up with some patch work and then he put it in primer. I also threw on my 17" centerlines. No matter what stage you're at on your project, when you put cool wheels on it looks a whole lot better...and keeps you motivated.

jchav62 · 03-16-2009, 03:41 PM

After that I was able to drive the truck home. At this point I had to deal with a few carb and electrical issues. The bed was later removed (given away). With the bed off, I pressure washed and painted the back half of the frame and suspension (no pics of that). Later, I got another bed from my brother in law's '79. This bed has the drain slots above the fenders and a fuel door. Here's a few more pics, including what she looks like now.

jchav62 · 03-16-2009, 03:47 PM

The next thing I am going to work on is the interior. We've already stripped the dash and all the trim pieces out. I scored a nice dash pad from a fellow board member. I dyed that black along with some door panels that were another junkyard score. My babe removed and cleaned all the interior trim pieces...those are dyed/painted and ready. I got a newer bench seat for it. Until I get the money to reupholster that, it's going to get a sarape (Mexican blanket) seat cover. I wish I had pics of the interior pieces, but I don't. Here's what it looks like inside now...

tvblazer78 · 03-16-2009, 04:40 PM

Sweet!! thanks for posting this.. I did not know if you had that anymore or what..

jchav62 · 03-16-2009, 05:53 PM

Yup, still got it. Now that spring is here I can get more done. I can't wait to spray the interior and get that all together. Thanks for looking.

vern350 · 03-16-2009, 06:58 PM

cool project, its come a long way. Looking forward to progess!

jchav62 · 03-17-2009, 09:14 AM

Thanks! I look forward to some nice weather to work on it some more. This is a budget build so it's been mostly junkyard parts and rattlecans. It's been fun!

65panelrat · 03-17-2009, 09:25 AM

Great job on the build thread Joseph, Sweet Lil' Trokita! Gotta Luv the Green! My Favorite! I always enjoy reading the fact, your familia is involved in your build!!!

jchav62 · 03-17-2009, 01:11 PM

Quote:

Originally Posted by 65panelrat

Great job on the build thread Joseph, Sweet Lil' Trokita! Gotta Luv the Green! My Favorite! I always enjoy reading the fact, your familia is involved in your build!!!

Can't do it without family and friends. You were there getting your hands dirty on this one a few times. Gracias!

Hoser's Girl · 03-17-2009, 03:25 PM

nice build thread.

Anyone care to take a guess as to what jchav got as a nice sweet romantic valentine's day gift???

you guess it! truck parts! ha ha

jchav62 · 03-17-2009, 05:49 PM

Quote:

Originally Posted by Hoser's Girl

nice build thread.

Anyone care to take a guess as to what jchav got as a nice sweet romantic valentine's day gift???

you guess it! truck parts! ha ha

You know the way to my heart!

jchav62 · 03-19-2009, 10:16 AM

Well, I played hookie yesterday to take advantage of the nicest day of the week here in Santa Fe. I cleaned out the interior and prepped it for paint.. Here are some pics...

jchav62 · 03-19-2009, 10:19 AM

After sanding and masking, I sprayed the color...

jchav62 · 03-19-2009, 10:23 AM

After another coat, I let the paint dry a bit, unmasked it and I was able to put in a few of the interior pieces. I need to get a few parts for the driver's side door to put that on together, and I need to get the carpet in before the seat, and I need to re-cover the headliner so I can put in the rest of the trim pieces. Here'e where it's at now....

65panelrat · 03-19-2009, 10:29 AM

That Green Looks Sick!!!! Awesome Job!!!

jchav62 · 03-19-2009, 12:36 PM

By the way, this is what I used to spray the paint. Worked great!

chappys4life · 03-19-2009, 03:40 PM

awesome job looks nice. What paint did you use?

jchav62 · 03-19-2009, 05:42 PM

Quote:

Originally Posted by chappys4life

awesome job looks nice. What paint did you use?

I used Kirker Acrylic Urethane Enamal paint. I picked it up online from Autobody Tool Mart. It was very reasonably priced and easy to work with. It's pre-reduced, you just have to add activator at a 3:1 mix. I got a gallon of paint and the reducer for about $80. I still have plenty to do the exterior when I get to that point.

Here's the link:

www.autobodytoolmart.com

They have plenty colors to choose from....

tvblazer78 · 03-19-2009, 07:47 PM

Wow! That's cool!! And I like that color too..

Chevyrod · 03-19-2009, 08:15 PM

Looking great man!!!! Love the green

thirdstreettito · 03-19-2009, 09:47 PM

Gorgeous color! Where do you buy the Preval stuff?

jason65 · 03-20-2009, 07:58 AM

Nice build ese. Where do find the time for all 3?

03-16-2009, 03:11 PM	#1
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	1973 Cheyenne Super 10 I never really started a build thread on this truck so here's one that goes back to the beginning and brings us to now... I found this truck on a Craigslist ad that said "Make Offer". The truck was at a house that was about to be foreclosed in Las Vegas, Nevada. Most people would have looked away from this truck. Not me. I contacted the guy and got the truck for $200 in February of 2008. So we took a roadtrip... Turns out this ugly truck had a few very cool things about it. It has a 350 in it, but after checking the VIN number, it came stock with a 454. Pretty cool for a half ton shortbed. It also has a factory tach, th400, and a posi 3.73(I later discovered 3.42's) rearend. Someday I would like to put a 454 back in her. Attached Images __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4 Last edited by jchav62; 10-26-2009 at 12:42 PM.

03-16-2009, 03:19 PM	#2
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: 1973 Cheyenne Super 10 We got the truck home (actually my brother-in-law's house) and the first thing I did was cleaned out the garbage and replaced some body parts. The truck came with another set of front fenders that were decent so I put them in primer and bolted them on. I was able to score a cherry hood from the junkyard for $30...did the same with that. I also found a nice front bumper. My brother-in-law gave me a nice chrome grille. I also ordered a few parts from LMC, new headlight bezels, and grille surround. My buddy Danny freshened up the fender emblems for me. Attached Images __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

03-16-2009, 03:29 PM	#3
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: 1973 Cheyenne Super 10 The 350 in the truck had been sitting for a long long time without an air cleaner or thermostat housing. A few parts had been taken off. I took the valve covers and intake off to inspect the upper internals. Turns out everything looked very clean and it had some pretty nice parts in there. The heads appear that they were built for racing...fancy studs, big rockers, guide plates, beefy push rods. The intake valley had been coated. Everything looked good. I cleaned everything and went back with some used parts that I scored. An Edelbrock Performer intake, HEI distributor, quadrajet, and some chrome valve covers. After installing all the parts and cleaning the fuel system, I put in a battery and it fired up! Runs pretty healthy. I wasn't sure at first, but she lived! Attached Images __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

03-16-2009, 03:34 PM	#4
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: 1973 Cheyenne Super 10 Next thing was the bed. It had the common rust that these early squarebody's are known for. I was involved in a three way bed trade with my brothers in law. I still had to get mine "fixed" before I could swap it though. Fred hooked me up with some patch work and then he put it in primer. I also threw on my 17" centerlines. No matter what stage you're at on your project, when you put cool wheels on it looks a whole lot better...and keeps you motivated. Attached Images __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

03-16-2009, 03:41 PM	#5
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: 1973 Cheyenne Super 10 After that I was able to drive the truck home. At this point I had to deal with a few carb and electrical issues. The bed was later removed (given away). With the bed off, I pressure washed and painted the back half of the frame and suspension (no pics of that). Later, I got another bed from my brother in law's '79. This bed has the drain slots above the fenders and a fuel door. Here's a few more pics, including what she looks like now. Attached Images __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

03-16-2009, 03:47 PM	#6
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: 1973 Cheyenne Super 10 The next thing I am going to work on is the interior. We've already stripped the dash and all the trim pieces out. I scored a nice dash pad from a fellow board member. I dyed that black along with some door panels that were another junkyard score. My babe removed and cleaned all the interior trim pieces...those are dyed/painted and ready. I got a newer bench seat for it. Until I get the money to reupholster that, it's going to get a sarape (Mexican blanket) seat cover. I wish I had pics of the interior pieces, but I don't. Here's what it looks like inside now... Attached Images __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4 Last edited by jchav62; 03-16-2009 at 03:54 PM.

03-16-2009, 04:40 PM	#7
tvblazer78 Low & Fast! Join Date: Jan 2007 Location: Knoxville, TN Posts: 3,110	Re: 1973 Cheyenne Super 10 Sweet!! thanks for posting this.. I did not know if you had that anymore or what.. __________________ Southeastern Mini Truckin' Nationals April 27 and 28, 2012

03-16-2009, 05:53 PM	#8
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: 1973 Cheyenne Super 10 Yup, still got it. Now that spring is here I can get more done. I can't wait to spray the interior and get that all together. Thanks for looking. __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

03-16-2009, 06:58 PM	#9
vern350 like a rock Join Date: Nov 2004 Location: Ontario, Canada Posts: 517	Re: 1973 Cheyenne Super 10 cool project, its come a long way. Looking forward to progess!

03-17-2009, 09:14 AM	#10
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: 1973 Cheyenne Super 10 Thanks! I look forward to some nice weather to work on it some more. This is a budget build so it's been mostly junkyard parts and rattlecans. It's been fun! __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

03-17-2009, 09:25 AM	#11
65panelrat Registered User Join Date: Aug 2008 Location: Rio Rancho, New Mexico Posts: 211	Re: 1973 Cheyenne Super 10 Great job on the build thread Joseph, Sweet Lil' Trokita! Gotta Luv the Green! My Favorite! I always enjoy reading the fact, your familia is involved in your build!!! __________________ Bowties For Life!🇺🇸

03-17-2009, 03:25 PM	#13
Hoser's Girl Chevy Chica Join Date: Nov 2007 Location: Santa Fe, Nuevo Mexico Posts: 94	Re: 1973 Cheyenne Super 10 nice build thread. Anyone care to take a guess as to what jchav got as a nice sweet romantic valentine's day gift??? you guess it! truck parts! ha ha __________________ ~La 'Mona' Lisa

03-19-2009, 10:16 AM	#15
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: 1973 Cheyenne Super 10 Well, I played hookie yesterday to take advantage of the nicest day of the week here in Santa Fe. I cleaned out the interior and prepped it for paint.. Here are some pics... Attached Images __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

03-19-2009, 10:19 AM	#16
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: 1973 Cheyenne Super 10 After sanding and masking, I sprayed the color... Attached Images __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

03-19-2009, 10:23 AM	#17
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: 1973 Cheyenne Super 10 After another coat, I let the paint dry a bit, unmasked it and I was able to put in a few of the interior pieces. I need to get a few parts for the driver's side door to put that on together, and I need to get the carpet in before the seat, and I need to re-cover the headliner so I can put in the rest of the trim pieces. Here'e where it's at now.... Attached Images __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4



Register or Log In To remove these advertisements.

03-19-2009, 10:29 AM	#18
65panelrat Registered User Join Date: Aug 2008 Location: Rio Rancho, New Mexico Posts: 211	Re: 1973 Cheyenne Super 10 That Green Looks Sick!!!! Awesome Job!!! __________________ Bowties For Life!🇺🇸 Last edited by 65panelrat; 03-19-2009 at 10:30 AM.

03-19-2009, 12:36 PM	#19
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: 1973 Cheyenne Super 10 By the way, this is what I used to spray the paint. Worked great! Attached Images __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

03-19-2009, 03:40 PM	#20
chappys4life Registered User Join Date: Oct 2008 Location: Richmond, VA Posts: 42	Re: 1973 Cheyenne Super 10 awesome job looks nice. What paint did you use?

03-19-2009, 07:47 PM	#22
tvblazer78 Low & Fast! Join Date: Jan 2007 Location: Knoxville, TN Posts: 3,110	Re: 1973 Cheyenne Super 10 Wow! That's cool!! And I like that color too.. __________________ Southeastern Mini Truckin' Nationals April 27 and 28, 2012

03-19-2009, 08:15 PM	#23
Chevyrod Registered User Join Date: Jan 2006 Location: florida Posts: 170	Re: 1973 Cheyenne Super 10 Looking great man!!!! Love the green

03-19-2009, 09:47 PM	#24
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: 1973 Cheyenne Super 10 Gorgeous color! Where do you buy the Preval stuff? __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

03-20-2009, 07:58 AM	#25
jason65 Registerd User Join Date: Sep 2008 Location: Oklahoma Posts: 2,118	Re: 1973 Cheyenne Super 10 Nice build ese. Where do find the time for all 3?

Register or Log In To remove these advertisements.