The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 12-18-2017, 08:02 PM   #1
RedBed
Registered User
 
RedBed's Avatar
 
Join Date: Apr 2017
Location: TX
Posts: 254
Coverlay install question

I bought a Coverlay dash cover. The PO had tried to recover the dash himself, with comical results (see pic).

I really like the look of the Coverlay and I'm getting ready to install. But the current vinyl cover is folded in a couple of places and a bit bulky under the cover. I am able to peel it off and be left with the foam padding intact. It might be better to install the cover over the foam so it would conform better, but I have not done it, and once you glue it, I assume you are pretty much "stuck" with it.

Has anyone installed one and if so, has anyone done it over the foam?

I did attempt to contact the Mfg, but they are closed for the day. They are very good about answering questions, but I am curious if anyone else has done this?

__________________
1979 Chevrolet Bonanza/305/4L60/Edelbrock Performer/Holley 600 Classic
RedBed is offline   Reply With Quote
Old 12-18-2017, 10:59 PM   #2
RedBed
Registered User
 
RedBed's Avatar
 
Join Date: Apr 2017
Location: TX
Posts: 254
Re: Coverlay install question

My dash pad was screwed down on the right side in 4 places. Is this the way it normally mounts?
__________________
1979 Chevrolet Bonanza/305/4L60/Edelbrock Performer/Holley 600 Classic

Last edited by RedBed; 12-22-2017 at 12:31 AM.
RedBed is offline   Reply With Quote
Old 12-18-2017, 11:23 PM   #3
mongocanfly
Post Whore

 
mongocanfly's Avatar
 
Join Date: May 2015
Location: Alabama
Posts: 14,557
Re: Coverlay install question

got one in my truck...works and looks good...I'd strip that garbage off...the coverlay only contacts the old dash in a couple places. .read the instructions. .it shows you where to put the silicome adhesive...
__________________
Mongo...aka Greg

RIP Dad
RIP Jesse

1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598
Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334
Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563
2023 Chevy Z71..daily driver
mongocanfly is offline   Reply With Quote
Old 12-18-2017, 11:40 PM   #4
RedBed
Registered User
 
RedBed's Avatar
 
Join Date: Apr 2017
Location: TX
Posts: 254
Re: Coverlay install question

Quote:
Originally Posted by mongocanfly View Post
got one in my truck...works and looks good...I'd strip that garbage off...the coverlay only contacts the old dash in a couple places. .read the instructions. .it shows you where to put the silicome adhesive...
After a little research it seems the 4 holes on the right side are normal. But the Coverlay does not have any holes in it, so I guess once it is on there is no removing the dash pad again unless you break the strip on the bottom?
__________________
1979 Chevrolet Bonanza/305/4L60/Edelbrock Performer/Holley 600 Classic
RedBed is offline   Reply With Quote
Old 12-19-2017, 12:55 AM   #5
Desert_Eagle02
Registered User
 
Join Date: May 2017
Location: TX <--> MI
Posts: 279
Re: Coverlay install question

Quote:
Originally Posted by RedBed View Post
After a little research it seems the 4 holes on the right side are normal. But the Coverlay does not have any holes in it, so I guess once it is on there is no removing the dash pad again unless you break the strip on the bottom?
Yes the 4 screws on the right side is how it is supposed to be. I have never used a Coverlay but I did replace my old dash pad with a new one. The new one had 4 rectangular indentations for the 4 screws just like the factory one. You put the dash pad in and get it lined up and when you are happy, you use a pick or an awl to make the screw holes in the pad itself. Perhaps that is how you also do it with the Coverlay?
__________________
1978 GMC K25
1984 Chevy Scottsdale K10 built 350 4"lift - SOLD
Desert_Eagle02 is offline   Reply With Quote
Old 12-20-2017, 09:49 PM   #6
tucsonjwt
Registered User
 
Join Date: Jul 2007
Location: Tucson, AZ
Posts: 3,188
Re: Coverlay install question

I did not install a Coverlay but I did install a competing brand of stick on cap. It was a disaster, though installed per mfg instructions. In HotZona 110+ degree heat it buckled and cracked all over the place. I had to remove it (and it took a lot of good foam and vinyl with it) and will be attempting to have a local upholsterer recover it. It might work in a nice cool climate like TX, but not AZ.
tucsonjwt is offline   Reply With Quote
Old 12-21-2017, 01:29 PM   #7
RotaryRocketeer
Registered User
 
RotaryRocketeer's Avatar
 
Join Date: Jul 2017
Location: OKC, OK
Posts: 247
Re: Coverlay install question

FWIW, the dash I got from Cheyenne was awesome and came with the clips already installed. A breeze to put in, and improved the interior of the truck 100%.
RotaryRocketeer is offline   Reply With Quote
Old 12-21-2017, 02:26 PM   #8
RedBed
Registered User
 
RedBed's Avatar
 
Join Date: Apr 2017
Location: TX
Posts: 254
Re: Coverlay install question

Yep, ok. Coverlay is boxed up for return. Will be calling Cheyenne. Thanks!
__________________
1979 Chevrolet Bonanza/305/4L60/Edelbrock Performer/Holley 600 Classic
RedBed is offline   Reply With Quote
Old 12-21-2017, 05:13 PM   #9
TKCR
Senior Member
 
TKCR's Avatar
 
Join Date: Oct 2014
Location: Ohio
Posts: 6,836
Re: Coverlay install question

Quote:
Originally Posted by RedBed View Post
Yep, ok. Coverlay is boxed up for return. Will be calling Cheyenne. Thanks!

You will be happier with the new dash. And all you’ll have to do is install it. Post up pics when it’s back together!!
TKCR is offline   Reply With Quote
Old 12-31-2017, 02:14 AM   #10
RedBed
Registered User
 
RedBed's Avatar
 
Join Date: Apr 2017
Location: TX
Posts: 254
Re: Coverlay install question

Ordered the dash pad from Cheyenne, will post when installed!
__________________
1979 Chevrolet Bonanza/305/4L60/Edelbrock Performer/Holley 600 Classic
RedBed is offline   Reply With Quote
Old 01-03-2018, 09:16 PM   #11
tucsonjwt
Registered User
 
Join Date: Jul 2007
Location: Tucson, AZ
Posts: 3,188
Re: Coverlay install question

Personally, I would not install any plastic dash pad, even one that is all plastic. I think the metal frame of the original dash makes it worth a shot for recovering, and I will be trying that at an upholstery shop.
tucsonjwt is offline   Reply With Quote
Old 01-04-2018, 11:48 AM   #12
RWJJR
Registered User
 
RWJJR's Avatar
 
Join Date: Feb 2005
Location: EAST TENNESSEE
Posts: 233
Re: Coverlay install question

Quote:
Originally Posted by RedBed View Post
Ordered the dash pad from Cheyenne, will post when installed!
You will love the dash from Cheyenne , best looking and fitting on the market.
__________________
1980 Silverado short bed
1993 GMC 1500 LS swap
2006 Lifted Z71 Crew Cab
RWJJR is offline   Reply With Quote
Old 01-12-2018, 04:48 AM   #13
echo7bravo
Registered User
 
Join Date: Oct 2017
Location: Hoover, Alabama
Posts: 15
Re: Coverlay install question

Has anyone ever paid an upholstery shop to recover a dash pad? Was thinking black leather with French seams would be sexy.
echo7bravo is offline   Reply With Quote
Old 01-12-2018, 12:01 PM   #14
RedBed
Registered User
 
RedBed's Avatar
 
Join Date: Apr 2017
Location: TX
Posts: 254
Re: Coverlay install question

A custom would be nice, but I received and installed my Cheyenne dash pad, and it is BEE-YOO-TEE-FUL!

Once I am done with interior I will post pics.

__________________
1979 Chevrolet Bonanza/305/4L60/Edelbrock Performer/Holley 600 Classic
RedBed is offline   Reply With Quote
Old 01-12-2018, 02:43 PM   #15
Ol Blue K20
Proprietor of Dale's Corner
 
Ol Blue K20's Avatar
 
Join Date: Nov 2012
Location: Vacaville , CA
Posts: 15,830
Re: Coverlay install question

This is my Cheyenne pad that I installed last week
Attached Images
   
__________________
"Some Days Chickens And Some Days Feathers"

Dale
XNGH ECV Sam Brannan 1004

R.I.P. 67ChevyRedneck
R.I.P. Grumpy Old Man
Ol Blue K20 is offline   Reply With Quote
Old 01-24-2018, 12:58 PM   #16
RedBed
Registered User
 
RedBed's Avatar
 
Join Date: Apr 2017
Location: TX
Posts: 254
Re: Coverlay install question

You guys were right. The Cheyenne dash pad is THE way to go. I am really happy with mine.
__________________
1979 Chevrolet Bonanza/305/4L60/Edelbrock Performer/Holley 600 Classic
RedBed is offline   Reply With Quote
Old 01-24-2018, 01:37 PM   #17
Ol Blue K20
Proprietor of Dale's Corner
 
Ol Blue K20's Avatar
 
Join Date: Nov 2012
Location: Vacaville , CA
Posts: 15,830
Re: Coverlay install question

Quote:
Originally Posted by RedBed View Post
You guys were right. The Cheyenne dash pad is THE way to go. I am really happy with mine.
Looks great!! I love mine too.
__________________
"Some Days Chickens And Some Days Feathers"

Dale
XNGH ECV Sam Brannan 1004

R.I.P. 67ChevyRedneck
R.I.P. Grumpy Old Man
Ol Blue K20 is offline   Reply With Quote
Old 01-24-2018, 02:34 PM   #18
Mattchu60
Registered User
 
Join Date: Jan 2014
Location: Swaledale, IA
Posts: 484
Re: Coverlay install question

Did your cheyenne dash drop right in? I got one that I believe was made by Dashes Direct a couple years ago - the install took many hours as it fit pretty poorly - had to cut a lot of material away to get it to sit flat on the dash and run a screw into the drivers side of the dash as it wanted to flare out.
Mattchu60 is offline   Reply With Quote
Old 01-24-2018, 02:43 PM   #19
RedBed
Registered User
 
RedBed's Avatar
 
Join Date: Apr 2017
Location: TX
Posts: 254
Re: Coverlay install question

It just slid right in, no trimming, no hassles. Came with the clips already installed. Actually it was one of the easiest jobs involving my interior refurb.
__________________
1979 Chevrolet Bonanza/305/4L60/Edelbrock Performer/Holley 600 Classic
RedBed is offline   Reply With Quote
Old 01-24-2018, 03:04 PM   #20
RotaryRocketeer
Registered User
 
RotaryRocketeer's Avatar
 
Join Date: Jul 2017
Location: OKC, OK
Posts: 247
Re: Coverlay install question

Quote:
Originally Posted by RedBed View Post
It just slid right in, no trimming, no hassles. Came with the clips already installed. Actually it was one of the easiest jobs involving my interior refurb.
Right? Mine was a breeze and looks awesome. Definitely an easier job than anticipated.
RotaryRocketeer is offline   Reply With Quote
Old 01-24-2018, 03:56 PM   #21
Ol Blue K20
Proprietor of Dale's Corner
 
Ol Blue K20's Avatar
 
Join Date: Nov 2012
Location: Vacaville , CA
Posts: 15,830
Re: Coverlay install question

On mine (89 V3500) it didn't like my drivers side speaker. I had to modify the speaker mount. Other than that it was a easy installation and looks great. I would buy another one in a heartbeat. They cost a little more but in my opinion it's worth it.
__________________
"Some Days Chickens And Some Days Feathers"

Dale
XNGH ECV Sam Brannan 1004

R.I.P. 67ChevyRedneck
R.I.P. Grumpy Old Man
Ol Blue K20 is offline   Reply With Quote
Old 01-24-2018, 05:12 PM   #22
RedBed
Registered User
 
RedBed's Avatar
 
Join Date: Apr 2017
Location: TX
Posts: 254
Re: Coverlay install question

Quote:
Originally Posted by Ol Blue K20 View Post
...They cost a little more but in my opinion it's worth it.
Yep. I am a notorious tightwad, and normally it works out, but occasionally, I "lose money by saving money".

The Coverlay is a great product if you have a stock, beat up dash. Looks good, easy install.

But in my case, the dash had been recovered by a non-pro, and it looked like sh*t aside from making it unable to accept the Coverlay. I should have known this and gone with the Cheyenne dash in the first place. Would have saved me on return shipping...

Live and learn... or not... heh heh.
__________________
1979 Chevrolet Bonanza/305/4L60/Edelbrock Performer/Holley 600 Classic
RedBed is offline   Reply With Quote
Old 01-24-2018, 07:22 PM   #23
TKCR
Senior Member
 
TKCR's Avatar
 
Join Date: Oct 2014
Location: Ohio
Posts: 6,836
Re: Coverlay install question

Both of those look awesome!!!
TKCR is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:07 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com