The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-27-2021, 02:08 PM   #1
87Scotty
Registered User
 
Join Date: Oct 2010
Location: Spartanburg, SC
Posts: 20
Factory sliding rear window seal needed

I have looked high and low for a rubber weather seal to reinstall the factory sliding glass rear window in my '87 Chevy Scottsdale. Does anyone know of a possible source? I believe that the factory part number is 15593315.
Since I can't find one, I wonder how body shops address this issue?
87Scotty is offline   Reply With Quote
Old 07-27-2021, 02:28 PM   #2
old Rusty C10
Robert Olson Transport
 
old Rusty C10's Avatar
 
Join Date: Oct 2002
Location: Howell NJ USA and a house in Deposit NY USA
Posts: 20,002
Re: Factory sliding rear window seal needed

i dont think OEM is available anymore but you can get one through LMC
__________________
Bob



1979 Chevrolet C20 LWB
1998 Chevrolet K2500 LWB
1971 Chevrolet Monte Carlo
1966 Ford Mustang
2019 Ram Bighorn 3500 SLT 4X4 Longbed Diesel
2005 Dodge 1500 SWB 4X4
2014 Harley Davidson Heritage Softtail


"If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board"
http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!)


PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport

Live each day to the fullest.. you never know when fate is going to pull the rug out from under you...
I hate cancer!!
old Rusty C10 is offline   Reply With Quote
Old 07-27-2021, 02:37 PM   #3
87Scotty
Registered User
 
Join Date: Oct 2010
Location: Spartanburg, SC
Posts: 20
Re: Factory sliding rear window seal needed

Tried LMC. They have one for a fixed glass but not for the sliding glass. Thanks for the reply!
87Scotty is offline   Reply With Quote
Old 07-27-2021, 02:47 PM   #4
kipps
Registered User
 
Join Date: Jul 2014
Location: North-central Virginia
Posts: 918
Re: Factory sliding rear window seal needed

Would a used gasket be of any use, or is it likely too far gone?

I have a sliding window in my truck, but want to convert it to a non-sliding window. One pane is broken out. It's the chunky aluminum type. I don't know if that's the factory window or not.
__________________
1987 C6P V20 truck, 2010 LMG 5.3, AFM delete, 2010 Camaro exhaust manifolds, 1997 nv4500, 1991 np241c, hydroboost, 2005 14bff axle & driveshaft, drop-n-lock gooseneck, 4.10 gears, 33" tires, stock suspension. Still a work in progress. Any questions or suggestions are welcome!
kipps is offline   Reply With Quote
Old 07-27-2021, 03:05 PM   #5
87Scotty
Registered User
 
Join Date: Oct 2010
Location: Spartanburg, SC
Posts: 20
Re: Factory sliding rear window seal needed

Thanks, but I would prefer a new one. If I don't find one this week, I am also going to go with a non-sliding window.
87Scotty is offline   Reply With Quote
Old 07-29-2021, 02:27 PM   #6
Pontiac1976
Registered User
 
Pontiac1976's Avatar
 
Join Date: Oct 2015
Location: Ottawa, Ontario, Canada
Posts: 609
Re: Factory sliding rear window seal needed

This may or may not help you. If you can tell what type rear slider you have. As said LMC does sell them for one as this wright up.
https://bowtieguy.proboards.com/thread/1311/rear-window-seals-break
Oh:Firefox does seem to show all the pic's
__________________
1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed
Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change.
Pontiac1976 is offline   Reply With Quote
Old 08-04-2021, 08:33 PM   #7
LT7A
Registered User
 
Join Date: Oct 2015
Location: Seattle, WA
Posts: 1,994
Re: Factory sliding rear window seal needed

I have read of people reusing their original, and even glass installers preferring to use the original if it's not damaged. So getting a hold of an OEM one might pay off. Also, I haven't checked, but maybe Precision makes one.
LT7A is offline   Reply With Quote
Old 08-24-2021, 09:39 PM   #8
65chevysub
Registered User
 
65chevysub's Avatar
 
Join Date: Feb 2013
Location: Cottonwood, Arizona
Posts: 1,304
Re: Factory sliding rear window seal needed

Unfortunately the LMC gasket wont work with factory slider windows. I'm going to either use my solid rear glass gasket, or the original gasket I got from a slider window truck.
Attached Images
 
65chevysub is offline   Reply With Quote
Old 08-25-2021, 01:10 PM   #9
brian1115
Registered User
 
Join Date: Apr 2015
Location: Richmond Hill Ontario Canada
Posts: 46
Re: Factory sliding rear window seal needed

I just put in the CR Lawrence solar tinted sliding back glass in my build. Use Precision WCR 1135 for weather-strip and WLS 1135 for lock strip. I called Brothers Truck Parts to make sure I had the correct part numbers before I ordered them and they said it would work.

A tip is to install both chrome corners outside of the truck before you put it on the pinch weld. I've tried the way they said to do it in the video and its a real bear to get it in. Also the ball hook tool works best and if you can get a second person with another tool to help its very easy.
__________________
1986 Chevy Fleetside Wrangler (Canadian Only)
brian1115 is offline   Reply With Quote
Old 08-26-2021, 07:35 PM   #10
Bloodhound
Registered User
 
Join Date: Dec 2011
Location: Massachusetts
Posts: 190
Re: Factory sliding rear window seal needed

Quote:
Originally Posted by brian1115 View Post
I just put in the CR Lawrence solar tinted sliding back glass in my build. Use Precision WCR 1135 for weather-strip and WLS 1135 for lock strip. I called Brothers Truck Parts to make sure I had the correct part numbers before I ordered them and they said it would work.

A tip is to install both chrome corners outside of the truck before you put it on the pinch weld. I've tried the way they said to do it in the video and its a real bear to get it in. Also the ball hook tool works best and if you can get a second person with another tool to help its very easy.
How do you like that window?
Bloodhound is offline   Reply With Quote
Old 08-27-2021, 09:24 AM   #11
brian1115
Registered User
 
Join Date: Apr 2015
Location: Richmond Hill Ontario Canada
Posts: 46
Re: Factory sliding rear window seal needed

I love it. It looks much better in person that in the pics. I converted the truck to vintage air ac but I always loved the feel of the air through a slider. I will ting the windshield and all the windows to whatever that tint is because its perfect.
__________________
1986 Chevy Fleetside Wrangler (Canadian Only)
brian1115 is offline   Reply With Quote
Old 09-04-2021, 01:04 PM   #12
Pontiac1976
Registered User
 
Pontiac1976's Avatar
 
Join Date: Oct 2015
Location: Ottawa, Ontario, Canada
Posts: 609
Re: Factory sliding rear window seal needed

brian1115 do you have any pic's of the rear slider installed and what the seal looks like to the cab window opening area around the slider.
__________________
1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed
Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change.
Pontiac1976 is offline   Reply With Quote
Old 09-04-2021, 02:32 PM   #13
brian1115
Registered User
 
Join Date: Apr 2015
Location: Richmond Hill Ontario Canada
Posts: 46
Re: Factory sliding rear window seal needed

Here you goName:  rsz_20210904_142329.jpg
Views: 70
Size:  60.5 KB

Name:  rsz_20210904_142340.jpg
Views: 68
Size:  28.4 KB

Name:  rsz_20210904_142346.jpg
Views: 69
Size:  46.8 KB

In case anyone is wondering what color my truck is. Its Big Bad Blue from a 69 Javelin. The original was much darker
__________________
1986 Chevy Fleetside Wrangler (Canadian Only)
brian1115 is offline   Reply With Quote
Old 09-05-2021, 12:56 PM   #14
Pontiac1976
Registered User
 
Pontiac1976's Avatar
 
Join Date: Oct 2015
Location: Ottawa, Ontario, Canada
Posts: 609
Re: Factory sliding rear window seal needed

This rear Slider looks a lot like one of the factory style standard slider that GM used. This worked with the dual working cab rear window rubber seal for standard glass and the standard slider. But there was two main types slider builds one works and looks a lot like above pic, other one does Not-Work.
*** The other key is the Rubber Seal has to be Custom style to work with the Standard Slider.***
__________________
1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed
Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change.
Pontiac1976 is offline   Reply With Quote
Old 09-23-2021, 07:58 PM   #15
Bloodhound
Registered User
 
Join Date: Dec 2011
Location: Massachusetts
Posts: 190
Re: Factory sliding rear window seal needed

Quote:
Originally Posted by brian1115 View Post
Here you goAttachment 2127519

Attachment 2127523

Attachment 2127524

In case anyone is wondering what color my truck is. Its Big Bad Blue from a 69 Javelin. The original was much darker
Looks awesome. Do you have the CR Lawrence part number and where did you order it from?
Bloodhound is offline   Reply With Quote
Old 09-23-2021, 11:48 PM   #16
brian1115
Registered User
 
Join Date: Apr 2015
Location: Richmond Hill Ontario Canada
Posts: 46
Re: Factory sliding rear window seal needed

Quote:
Originally Posted by Bloodhound View Post
Looks awesome. Do you have the CR Lawrence part number and where did you order it from?

TSW850S is the part number. I believe I got it off of amazon.
__________________
1986 Chevy Fleetside Wrangler (Canadian Only)
brian1115 is offline   Reply With Quote
Old 09-24-2021, 04:12 AM   #17
Bloodhound
Registered User
 
Join Date: Dec 2011
Location: Massachusetts
Posts: 190
Re: Factory sliding rear window seal needed

Quote:
Originally Posted by brian1115 View Post
TSW850S is the part number. I believe I got it off of amazon.
Thanks! Of course it's "unavailable" now.
Bloodhound is offline   Reply With Quote
Old 09-24-2021, 08:02 AM   #18
brian1115
Registered User
 
Join Date: Apr 2015
Location: Richmond Hill Ontario Canada
Posts: 46
Re: Factory sliding rear window seal needed

Quote:
Originally Posted by Bloodhound View Post
Thanks! Of course it's "unavailable" now.
Try brothers truck parts I believe they sell the exact same one. It was them I contacted about which weather seal was the correct one for the truck.
__________________
1986 Chevy Fleetside Wrangler (Canadian Only)
brian1115 is offline   Reply With Quote
Old 09-24-2021, 11:49 PM   #19
Bloodhound
Registered User
 
Join Date: Dec 2011
Location: Massachusetts
Posts: 190
Re: Factory sliding rear window seal needed

Quote:
Originally Posted by brian1115 View Post
Try brothers truck parts I believe they sell the exact same one. It was them I contacted about which weather seal was the correct one for the truck.
Indeed it is, looks like it's unavailable until December. I will check back, thanks for the info.
Bloodhound is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:36 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
Copyright 1997-2020 67-72chevytrucks.com