|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
05-18-2012, 08:30 PM
|
#1 |
|
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,403
|
Tork specs,front hubs 02 silverado?
Does anybody have the tork specs for the 3 bolts that hold front hubs to the knuckle(2wd silverado 1500)? Also , my guess is a couple drops of locktite on the threads wouldnt hurt? crazyL
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
|
|
|
05-19-2012, 08:46 AM
|
#2 |
|
Senior Member
 
Join Date: Sep 2005
Location: Lewisville, Nc
Posts: 10,217
|
Re: Tork specs,front hubs 02 silverado?
__________________
David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube |
|
|
|
|
05-19-2012, 08:49 AM
|
#3 |
|
Senior Member
Join Date: Sep 2005
Location: Lewisville, Nc
Posts: 10,217
|
Re: Tork specs,front hubs 02 silverado?
i did look up the torque spec but it doesn't show one in my repair info i normally clean teh bolts up and put a dap of locktite on them and runn them in with an impact gun
__________________
David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube |
|
|
|
|
05-19-2012, 09:00 AM
|
#4 |
|
Senior Member
Join Date: Sep 2005
Location: Lewisville, Nc
Posts: 10,217
|
Re: Tork specs,front hubs 02 silverado?
just found ti the hub to knuckle bolts are 133 ftlbs
__________________
David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube |
|
|
|
|
05-19-2012, 02:13 PM
|
#5 |
|
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,403
|
Re: Tork specs,front hubs 02 silverado?
Thank you much....crazyL
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
|
|
|
|
09-26-2012, 07:12 PM
|
#6 |
|
Registered User
Join Date: Jan 2012
Location: EL PASO TX.
Posts: 51
|
Re: Tork specs,front hubs 02 silverado?
Thanks from me too.
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
