The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-14-2019, 08:32 PM   #1
68bbc/20
Registered User
 
Join Date: Dec 2018
Location: greencastle indiana
Posts: 105
compressed air question

i'm getting ready to run air about 80 feet to an addition I built on my pole barn
what size, what kind of lines have any of you plumbed your shops with? any special features you did for future use or equipment that might be helpful to
set it up for now while i'm running it? thanks for any input you can recommend. Les
68bbc/20 is offline   Reply With Quote
Old 03-14-2019, 08:39 PM   #2
jcwren
Registered User
 
Join Date: Nov 2018
Location: Flowery Branch, GA
Posts: 206
Re: compressed air question

Do NOT use PVC. That's a fragmentation bomb waiting to go off.
__________________
1970 C10 LWB Stepside
1971 Dodge Dart
1993 Buick Roadmaster Estate Wagon
jcwren is offline   Reply With Quote
Old 03-14-2019, 08:44 PM   #3
AussieinNC
Moderator
 
AussieinNC's Avatar
 
Join Date: Jun 2017
Location: Cherryville, NC
Posts: 2,152
Re: compressed air question

It all depends on what you intend to use the "air supply" for?

Most economical is 1" galv pipe...but if the end use is as a spray booth supply...save yourself a huge headache and put another compressor out there....

When plumbing air lines you MUST include drop points with drain valves in each vertical drop line....below the outlet nipple....

Dryers are nice...keeps moisture out of your air tools...(and paint!)....

In long runs, I try and install a ballast tank to provide more air supply load balancing...an old compressor tank works well....

Hope this helps...

__________________
Family and country before all others...

2006 Chevy Silverado (Daily Driver)
2012 Chevy Equinox

AussieinNC is offline   Reply With Quote
Old 03-14-2019, 08:47 PM   #4
jcwren
Registered User
 
Join Date: Nov 2018
Location: Flowery Branch, GA
Posts: 206
Re: compressed air question

Quote:
Originally Posted by AussieinNC View Post
It all depends on what you intend to use the "air supply" for?

Most economical is 1" galv pipe...but if the end use is as a spray booth supply...save yourself a huge headache and put another compressor out there....

When plumbing air lines you MUST include drop points with drain valves in each vertical drop line....below the outlet nipple....
<chop>
And cut-off ball valves at logical places.
__________________
1970 C10 LWB Stepside
1971 Dodge Dart
1993 Buick Roadmaster Estate Wagon
jcwren is offline   Reply With Quote
Old 03-14-2019, 08:50 PM   #5
68bbc/20
Registered User
 
Join Date: Dec 2018
Location: greencastle indiana
Posts: 105
Re: compressed air question

both are good replies.
68bbc/20 is offline   Reply With Quote
Old 03-14-2019, 09:17 PM   #6
B. W.
Registered User
 
B. W.'s Avatar
 
Join Date: Nov 2014
Location: Bigfork, Montana
Posts: 1,137
Re: compressed air question

With a run that long I'd go with at least 2" pipe. With a smaller diameter you may run out of air even though the compressor & tank are large enough to supply it.

The great thing about a long run is that your air will be dry. Run it slightly uphill & put a drain at the low end.

And the guys are right about not using PVC but if you are burying the pipe I'd have no issue with it. I have about a 40' run of 2" PVC buried at my shop & have had no issues. If it were to blow no one is in danger. ( been under ground for about 15 years now)

The extra tank that Aussie recommends is a great idea also.
B. W. is offline   Reply With Quote
Old 03-15-2019, 12:19 AM   #7
franken
Registered User
 
Join Date: Jun 2013
Location: Somewhere
Posts: 3,052
Re: compressed air question

The issue w/ PVC is it gets brittle when exposed to UV or sunlight or whatever. No bueno for compressed air.
Run air down and no drain at the lowest point and you'll have bad air forever. That means if you want to bury the lines bad things will happen.
People say galvanized pipe flakes the zinc off and blows it through the system so use black pipe. People say black pipe rusts so don't use it. I say design a system where water can't collect.
My theory is water should be caught in the tank (always collects here), in a dryer (might be a simple filter/dryer) or pushed out at the end. Cruel, but the air system purging itself mostly automagically is the important/best part. People pushing multiple drops in a 2 car garage or multiple ball valves are delirious.
My system is log horizontal runs and short vertical runs with unions. It's modular so you can take it apart.. Then at the end, I have a short horizontal run w/ a union where the filter dryer regulator and outlets live. All simple stupid modular expandable shrinkable and made with crap from the home store.
Don't believe me; read up on small shop air systems. Then again, the internet is full of crap.

Last edited by franken; 03-15-2019 at 12:27 AM.
franken is offline   Reply With Quote
Old 03-15-2019, 08:43 AM   #8
jcwren
Registered User
 
Join Date: Nov 2018
Location: Flowery Branch, GA
Posts: 206
Re: compressed air question

Quote:
Originally Posted by franken View Post
People say galvanized pipe flakes the zinc off and blows it through the system so use black pipe. People say black pipe rusts so don't use it. I say design a system where water can't collect.
What people really say is use copper pipe. But who can afford that, these days?
__________________
1970 C10 LWB Stepside
1971 Dodge Dart
1993 Buick Roadmaster Estate Wagon
jcwren is offline   Reply With Quote
Old 03-15-2019, 08:24 PM   #9
franken
Registered User
 
Join Date: Jun 2013
Location: Somewhere
Posts: 3,052
Re: compressed air question

Quote:
Originally Posted by jcwren View Post
What people really say is use copper pipe. But who can afford that, these days?
The typical answer is use black pipe, but then people whine about it rusting--in 50 years. Design and build a system where water has to flush out and your grandchildren could be using the system at the end of the century.
franken is offline   Reply With Quote
Old 03-15-2019, 12:13 PM   #10
Daaaanz67
Registered User
 
Join Date: Nov 2011
Location: Idaho
Posts: 857
Re: compressed air question

My friends auto shop uses PEX. 3/4” on the main runs with 1/2” drops. Seems to be working well for him.
Daaaanz67 is offline   Reply With Quote
Old 03-15-2019, 01:54 PM   #11
Coley
Registered User
 
Coley's Avatar
 
Join Date: Oct 2011
Location: Victoria, B.C
Posts: 3,794
Re: compressed air question

Ok, a couple of important questions to get some needed information:

1) What is the max. pressure that you want to produce? or will be available from your compressor?
2) Are you burying this air line or will it be on the ground or overhead or in a building? (heated or?)
3) Is this 80ft a straight run outside?...or is it 80ft equivalency of a variety up bends, height changes etc as it weaves through and to your new addition?

....lets start there and we can help sort this out.
All good
Coley
__________________
....for some men, there is experience, skill and effort....for the others...there is visa and UPS LOL
1966 Chevy 1/2 ton (Florida- Red/white)
1972 Chevy 1/2 ton (California- Blue/white)
2005 Chevy Silverado HD2500/Duramax
2000 Dodge Ram 1500
Coley is offline   Reply With Quote
Old 03-15-2019, 07:39 PM   #12
68bbc/20
Registered User
 
Join Date: Dec 2018
Location: greencastle indiana
Posts: 105
Re: compressed air question

it will be inside a pole barn up and dropped down the walls and thru the trusses 40 feet to reach my addition. building is not heated. I just want air for tools at this time, may consider painting later on down the road.
68bbc/20 is offline   Reply With Quote
Old 03-15-2019, 07:41 PM   #13
68bbc/20
Registered User
 
Join Date: Dec 2018
Location: greencastle indiana
Posts: 105
Re: compressed air question

tank kicks off at 130lbs.
68bbc/20 is offline   Reply With Quote
Old 03-15-2019, 08:04 PM   #14
AussieinNC
Moderator
 
AussieinNC's Avatar
 
Join Date: Jun 2017
Location: Cherryville, NC
Posts: 2,152
Re: compressed air question

PEX is not stable when exposed to light...it will degrade....its meant to be used indoors or in crawlspaces or walls...

Black pipe or gal pipe....just keep it running slightly down hill to a drain port and drain all lines once a month in Summer....once every two months in Winter....

__________________
Family and country before all others...

2006 Chevy Silverado (Daily Driver)
2012 Chevy Equinox

AussieinNC is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:42 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com