The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-08-2018, 03:07 PM   #1
RotaryRocketeer
Registered User
 
RotaryRocketeer's Avatar
 
Join Date: Jul 2017
Location: OKC, OK
Posts: 247
LQ4 Swap A/C Question

Truck came equipped with A/C from the factory. Can I just retrofit the LQ4 compressor to my existing system and expect it to work like normal? I admittedly don't know much about air conditioning systems, refrigerant, etc...
RotaryRocketeer is offline   Reply With Quote
Old 03-09-2018, 09:40 AM   #2
Rich84
Registered User
 
Rich84's Avatar
 
Join Date: Mar 2012
Location: Woodbury, Ct.
Posts: 1,661
Re: LQ4 Swap A/C Question

I'm watching this one...Doing the same thing. Have the engine positioned to put the compressor in the LQ4 stock location.
Rich84 is offline   Reply With Quote
Old 03-09-2018, 10:25 AM   #3
hatzie
Moderator
 
hatzie's Avatar
 
Join Date: Oct 2008
Location: Wentworth, NH
Posts: 4,911
Re: LQ4 Swap A/C Question

The LQ4 likely has a variable displacement AC compressor. That unit expects the AC controls from the donor and the electronic AC airbox setup from the donor. You have cables and 14.5volts from the control head in the dash out to the LPCO(Low-Pressure Cutoff) switch on the Accumulator and on to the AC compressor clutch.

I'd get a Sanden compressor and LS adapter brackets from Vintage Air or the like.

You'll also need to build some custom hoses or have someone else make em that will mate the Sanden to your stock Evaporator and Condenser.

I would highly recommend adding a HPCO (High-Pressure Cutoff) Switch on the compressor and wiring it in series between the LPCO on the accumulator and the compressor clutch.

A Nice-to-Have would be a Wide Open Throttle Cutout switch to kill the AC when you kick it down past 2/3-7/8 throttle. From roughly 2002 the LQ4 is a fly by wire engine so you'd need an AC throttle cutoff output from the PCM (if one exists) to a control relay or some such or a mechanical linkage at the go pedal.
__________________
1959 M35A2 LDT465-1D SOLD
1967 Dodge W200 B383, NP420/NP201 SOLD
1969 Dodge Polara 500 B383, A833 SOLD
1972 Ford F250 FE390, NP435/NP205 SOLD
1976 Chevy K20, 6.5L, NV4500/NP208 SOLD
1986 M1008 CUCV SOLD
2000 GMC C2500, TD6.5L, NV4500
2005 Chevy Silverado LS 2500HD 6.0L 4L80E/NP263
2009 Impala SS LS4 V8


RTFM... GM Parts Books, GM Schematics, GM service manuals, and GM training materials...Please include at least the year and model in your threads. It'll be easier to answer your questions.
And please let us know if and how your repairs were successful.

Last edited by hatzie; 03-09-2018 at 10:31 AM.
hatzie is offline   Reply With Quote
Old 03-09-2018, 10:42 AM   #4
Rich84
Registered User
 
Rich84's Avatar
 
Join Date: Mar 2012
Location: Woodbury, Ct.
Posts: 1,661
Re: LQ4 Swap A/C Question

I read on another post somewhere that the van compressors are not variable. If that's the case, is it do-able?
Rich84 is offline   Reply With Quote
Old 03-09-2018, 01:05 PM   #5
andyh1956
Registered User
 
Join Date: Mar 2010
Location: thomastown mississippi
Posts: 1,261
Re: LQ4 Swap A/C Question

AC fittings can be found at Aeroquip that you can make up at home without having to crimp hoses.
We used these in Afghanistan & are slick as Owl %@#!
https://www.bing.com/images/search?v...x=0&ajaxhist=0
andyh1956 is offline   Reply With Quote
Old 03-10-2018, 12:38 PM   #6
Nodnarb76
Registered User
 
Nodnarb76's Avatar
 
Join Date: May 2013
Location: Mississippi
Posts: 501
Re: LQ4 Swap A/C Question

I ended up using a Saden compressor with Dirty Dingo brackets. Fits and works great. had some ac lines made and works like a charm.
__________________


1987 R20 Suburban LQ4/4L80e swap: http://67-72chevytrucks.com/vboard/s...d.php?t=693824
Nodnarb76 is offline   Reply With Quote
Old 03-10-2018, 09:07 PM   #7
4x4k30
Registered User
 
4x4k30's Avatar
 
Join Date: Jun 2003
Location: ga
Posts: 630
Re: LQ4 Swap A/C Question

i used a sanden compressor on my 77 with a 6.0 I used kwik performance brackets and had to get new hoses made and I used r134 in then whole system. I also have a 79 with factory air and used the r134 in it also with no problems .
Attached Images
 
__________________
4x4k30 if trouble was money i would have plenty

Last edited by 4x4k30; 03-10-2018 at 09:17 PM.
4x4k30 is offline   Reply With Quote
Old 03-12-2018, 04:41 PM   #8
RotaryRocketeer
Registered User
 
RotaryRocketeer's Avatar
 
Join Date: Jul 2017
Location: OKC, OK
Posts: 247
Re: LQ4 Swap A/C Question

Thanks, all, for the answers. Looks like the Sanden top mount is the way to go. Good to know that the system can take 134 as well.
RotaryRocketeer is offline   Reply With Quote
Old 03-15-2018, 10:45 AM   #9
hatzie
Moderator
 
hatzie's Avatar
 
Join Date: Oct 2008
Location: Wentworth, NH
Posts: 4,911
Re: LQ4 Swap A/C Question

The condenser on these pickups is MASSIVE.
You can get away with R134a using the stock 1980's Harrison R4 radial compressor on these rigs. The old 1970's Harrison A6 will literally freeze you out of the cab on Max AC using R134a.

Make sure you flush out the old mineral or PAG or whatever oil from inside all of the hard parts. Mineral oil is not compatible with R134a so it won't properly travel around the system like Ester refrigerant oil and it'll insulate the inside of the evaporator and condenser. PAG and Ester oil is compatible with R134a but you don't know how much of it there is and how much water it's picked up. Get rid of all of it.
Dump the unknown pedigree oil charge that comes in your compressor and re-fill with your choice of oil. It's likely loaded with humidity and even a hard vac won't boil that much water out. The other benefit is the whole system oil charge comes from a known pedigree source and you know exactly how much oil is in there.
Be very careful to only use just enough oil. Too much oil will insulate the system just like extra mineral oil from the old R12 charge.
__________________
1959 M35A2 LDT465-1D SOLD
1967 Dodge W200 B383, NP420/NP201 SOLD
1969 Dodge Polara 500 B383, A833 SOLD
1972 Ford F250 FE390, NP435/NP205 SOLD
1976 Chevy K20, 6.5L, NV4500/NP208 SOLD
1986 M1008 CUCV SOLD
2000 GMC C2500, TD6.5L, NV4500
2005 Chevy Silverado LS 2500HD 6.0L 4L80E/NP263
2009 Impala SS LS4 V8


RTFM... GM Parts Books, GM Schematics, GM service manuals, and GM training materials...Please include at least the year and model in your threads. It'll be easier to answer your questions.
And please let us know if and how your repairs were successful.

Last edited by hatzie; 03-15-2018 at 10:51 AM.
hatzie is offline   Reply With Quote
Old 03-15-2018, 10:52 AM   #10
hatzie
Moderator
 
hatzie's Avatar
 
Join Date: Oct 2008
Location: Wentworth, NH
Posts: 4,911
Re: LQ4 Swap A/C Question

Quote:
Originally Posted by Rich84 View Post
I read on another post somewhere that the van compressors are not variable. If that's the case, is it do-able?
If it's a regular compressor then use it.
__________________
1959 M35A2 LDT465-1D SOLD
1967 Dodge W200 B383, NP420/NP201 SOLD
1969 Dodge Polara 500 B383, A833 SOLD
1972 Ford F250 FE390, NP435/NP205 SOLD
1976 Chevy K20, 6.5L, NV4500/NP208 SOLD
1986 M1008 CUCV SOLD
2000 GMC C2500, TD6.5L, NV4500
2005 Chevy Silverado LS 2500HD 6.0L 4L80E/NP263
2009 Impala SS LS4 V8


RTFM... GM Parts Books, GM Schematics, GM service manuals, and GM training materials...Please include at least the year and model in your threads. It'll be easier to answer your questions.
And please let us know if and how your repairs were successful.
hatzie is offline   Reply With Quote
Old 03-15-2018, 11:22 AM   #11
RotaryRocketeer
Registered User
 
RotaryRocketeer's Avatar
 
Join Date: Jul 2017
Location: OKC, OK
Posts: 247
Re: LQ4 Swap A/C Question

Quote:
Originally Posted by hatzie View Post
The condenser on these pickups is MASSIVE.
You can get away with R134a using the stock 1980's Harrison R4 radial compressor on these rigs. The old 1970's Harrison A6 will literally freeze you out of the cab on Max AC using R134a.

Make sure you flush out the old mineral or PAG or whatever oil from inside all of the hard parts. Mineral oil is not compatible with R134a so it won't properly travel around the system like Ester refrigerant oil and it'll insulate the inside of the evaporator and condenser. PAG and Ester oil is compatible with R134a but you don't know how much of it there is and how much water it's picked up. Get rid of all of it.
Dump the unknown pedigree oil charge that comes in your compressor and re-fill with your choice of oil. It's likely loaded with humidity and even a hard vac won't boil that much water out. The other benefit is the whole system oil charge comes from a known pedigree source and you know exactly how much oil is in there.
Be very careful to only use just enough oil. Too much oil will insulate the system just like extra mineral oil from the old R12 charge.
Great info here. Thank you very much. It'll be nice to have air conditioning AND a 6.0 in this sucker.
RotaryRocketeer is offline   Reply With Quote
Old 03-15-2018, 01:39 PM   #12
hatzie
Moderator
 
hatzie's Avatar
 
Join Date: Oct 2008
Location: Wentworth, NH
Posts: 4,911
Re: LQ4 Swap A/C Question

One nice thing about the Vintage Air systems is the smaller footprint in the engine bay. That big ole Harrison AC Airbox that protrudes 1/3 of the way along the engine goes away because it all fits inside the cab.

You will pay a fair price for the nice compact size tho...
__________________
1959 M35A2 LDT465-1D SOLD
1967 Dodge W200 B383, NP420/NP201 SOLD
1969 Dodge Polara 500 B383, A833 SOLD
1972 Ford F250 FE390, NP435/NP205 SOLD
1976 Chevy K20, 6.5L, NV4500/NP208 SOLD
1986 M1008 CUCV SOLD
2000 GMC C2500, TD6.5L, NV4500
2005 Chevy Silverado LS 2500HD 6.0L 4L80E/NP263
2009 Impala SS LS4 V8


RTFM... GM Parts Books, GM Schematics, GM service manuals, and GM training materials...Please include at least the year and model in your threads. It'll be easier to answer your questions.
And please let us know if and how your repairs were successful.
hatzie is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:03 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com