CT 68 and 72 doors,noses with 72 cab and 68lwb bed

[68and72body]

I am selling this body because i was gonna put it on another frame and lost interest. I would like to get $1500 for everything, if it doesn't sell by the end of the month i will then part it. if theres any pics youd like to see post here and ill post them back. Here is what they were:
1972 c20 2wd truck and a
1968 c20 2wd truck

My parts are not perfect but they are usable or easily fixable
Heres what i have:
1972 Cab with title (silicone was put in roof drain tray[not my doing])
auto column with stock wheel
rear one piece window
floors are solid
still on frame to keep it off ground
windshield is good still
2 gauge clusters (sorry not tach clusters)
Dash was never cut
has pedals and master cyl
still has rug
in truck tank
have ac heater panel also
needs corners and rockers
no seat

72 doors (red with black door panels)
drivers still has windows pass side does not
with door panels
no dents could use bottoms

68 doors (white with blue door panels)
glass is good
roll up and down
door panels

68 nose (white)
fenders with 20 emblems (light rust on bottoms)
inner fenders (light rust on bottoms)
grille
bumper
hood
headlights and mounts
radiator support (usable but id replace)

72 nose (red)
fenders
inner fenders (light rust on bottoms)
hood
(think i have headlights and grille have to look)

68 long bed (white)
has 2 in bed tanks with rubber bladders about 3 gallons a piece i think check pics
Bed floor in rear is rusted through but i would trust using this
Rusty needs wheel wells but usable
No Tailgate
Cap not included

1968 Rear slider window
good with seal

[68and72body]

more pics

[68and72body]

even more

[68and72body]

last ones

[tabarcus]

How much for the 68 hood? Do you have a 68 hood?

[tap500]

Interested in right inner fender, from Hartford area.