'60-'63 Chevy/GMC rubber floor mat-low hump - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*LILRED66* · 11-11-2008, 02:55 AM

'60-'63 Chevy/GMC rubber floor mat for a low hump...automatic or column shift truck. New, still in box...never installed. I bought for a 4-5-6 Chevy truck and realized they are different than the '60-'63 rubber floor mat. $100.00 packaged and shipped, via UPS, Ground.

Please let me know if I can help you with this item or other 4-5-6 Chevy truck parts in the future.

*LILRED66* · 11-25-2008, 12:18 AM

Offers...would make a great Christmas gift.

502tripower · 11-30-2008, 04:10 PM

Tony, That does not look like it would fit my 1962 cab. Here are a few pics. This is the low hump. You can see were I drilled out the spot welds to remove the big hump after I found the low hump and of course after I had the bottom of the cab powder coated. I wonder if that is 55-59?

*LILRED66* · 12-01-2008, 12:17 AM

According to the label on the box and the seller, it is specific to the '60-'63 low hump cabs. I have had a number of '60-'66 Chevy trucks, both high hump and low hump and I have never seen one that looks quite like yours, so I don't have a good answer to your question. The hump contour on the mat looks rounded and symetric in the photo, so I quess I need to drop it in a cab and see how it fits. Thanks for the heads up.

*LILRED66* · 12-11-2008, 06:36 AM

Mylanta...I thought this thing would sell. Any takers? It would make a great Christmas gift, but to big to fit in a stocking, so you would have to put it under the tree.

Happy Holidays.

*LILRED66* · 01-16-2009, 10:44 AM

Anyone need this nice, original survivor?

joe231 · 01-16-2009, 11:41 AM

so it is NOS?

*LILRED66* · 01-20-2009, 05:50 PM

I bought this mat from a fellow at a Swap Meet in Mackungie, PA in June, 2007. He told me it was an NOS part, so I bought it. I had a '63 Chevy C10 swb fleetside that I was going to put it in, but I sold the truck to fellow member 283man here on the site, so I don't need it anymore.

4dranch · 01-23-2009, 03:06 PM

Tony,
PM sent
David

*LILRED66* · 01-23-2009, 07:50 PM

David:

Thanks for your interest. I replied to your PM. Please let me know if I can help you with this item or other 4-5-6 Chevy truck parts in the future.

4dranch · 01-23-2009, 11:41 PM

Tony, I have a couple questions.

I'm guessing I have a low hump, correct. Not a good picture, If you need another one let me know.
And how does the mat fit? How much area will be covered? all the way to the gas tank?
Thanks, David

*LILRED66* · 01-26-2009, 10:16 PM

David:

Thanks for the inquiry. You have a low hump. This mat fits your truck. The factory/reproduction rubber floor mats only go to the bump in the floorboard, below the front lip of the factory bench seat. I am not aware of a reproduction rubber floor mat that goes to the gas tank. I know the reproduction carpets go all the way to the gas tank.

Let me know if I can help you with this item or other 4-5-6 Chevy truck parts in the future.

*LILRED66* · 02-12-2009, 08:30 PM

Offers?

*LILRED66* · 02-16-2009, 01:39 PM

$100.00, including shipping...

*LILRED66* · 04-16-2009, 03:51 AM

What a deal...anyone?

11-11-2008, 02:55 AM	#1
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	'60-'63 Chevy/GMC rubber floor mat-low hump '60-'63 Chevy/GMC rubber floor mat for a low hump...automatic or column shift truck. New, still in box...never installed. I bought for a 4-5-6 Chevy truck and realized they are different than the '60-'63 rubber floor mat. $100.00 packaged and shipped, via UPS, Ground. Please let me know if I can help you with this item or other 4-5-6 Chevy truck parts in the future. Attached Images Last edited by LILRED66; 11-11-2008 at 02:57 AM.

11-25-2008, 12:18 AM	#2
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: '60-'63 Chevy/GMC rubber floor mat-low hump Offers...would make a great Christmas gift.

11-30-2008, 04:10 PM	#3
502tripower Registered User Join Date: Jan 2008 Location: Satsop, WA Posts: 606	Re: '60-'63 Chevy/GMC rubber floor mat-low hump Tony, That does not look like it would fit my 1962 cab. Here are a few pics. This is the low hump. You can see were I drilled out the spot welds to remove the big hump after I found the low hump and of course after I had the bottom of the cab powder coated. I wonder if that is 55-59? Attached Images __________________ 1963' Chev Custom Cab 502, 67' 435hp 3X2 intake, 9" 4:30 Posi 1961 Impala SS 348/350 4-speed 3:70 Posi 1961 Bel-Air Bubble Top 283 Turboglide soon to have a 348 3X2 4-speed 1950 17' Fairliner twin cockpit barrel stern 312 Y block 1X1 intake Borg Warner 1:1 gear 1957 Fleetform 14' twin cockpit barrel stern 1969 BP-125 Merc 1949 Transitier 3-wheel forklift Crosley 4-Banger 98' FXD 2002 2500HD

12-01-2008, 12:17 AM	#4
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: '60-'63 Chevy/GMC rubber floor mat-low hump According to the label on the box and the seller, it is specific to the '60-'63 low hump cabs. I have had a number of '60-'66 Chevy trucks, both high hump and low hump and I have never seen one that looks quite like yours, so I don't have a good answer to your question. The hump contour on the mat looks rounded and symetric in the photo, so I quess I need to drop it in a cab and see how it fits. Thanks for the heads up. Last edited by LILRED66; 12-01-2008 at 12:19 AM.

12-11-2008, 06:36 AM	#5
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: '60-'63 Chevy/GMC rubber floor mat-low hump Mylanta...I thought this thing would sell. Any takers? It would make a great Christmas gift, but to big to fit in a stocking, so you would have to put it under the tree. Happy Holidays.

01-16-2009, 10:44 AM	#6
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: '60-'63 Chevy/GMC rubber floor mat-low hump Anyone need this nice, original survivor?

01-16-2009, 11:41 AM	#7
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: '60-'63 Chevy/GMC rubber floor mat-low hump so it is NOS? __________________ *CHEVY ONLY*

01-20-2009, 05:50 PM	#8
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: '60-'63 Chevy/GMC rubber floor mat-low hump I bought this mat from a fellow at a Swap Meet in Mackungie, PA in June, 2007. He told me it was an NOS part, so I bought it. I had a '63 Chevy C10 swb fleetside that I was going to put it in, but I sold the truck to fellow member 283man here on the site, so I don't need it anymore.

01-23-2009, 03:06 PM	#9
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: '60-'63 Chevy/GMC rubber floor mat-low hump Tony, PM sent David __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q

01-23-2009, 07:50 PM	#10
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: '60-'63 Chevy/GMC rubber floor mat-low hump David: Thanks for your interest. I replied to your PM. Please let me know if I can help you with this item or other 4-5-6 Chevy truck parts in the future.

01-23-2009, 11:41 PM	#11
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: '60-'63 Chevy/GMC rubber floor mat-low hump Tony, I have a couple questions. I'm guessing I have a low hump, correct. Not a good picture, If you need another one let me know. And how does the mat fit? How much area will be covered? all the way to the gas tank? Thanks, David Attached Images __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q

01-26-2009, 10:16 PM	#12
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: '60-'63 Chevy/GMC rubber floor mat-low hump David: Thanks for the inquiry. You have a low hump. This mat fits your truck. The factory/reproduction rubber floor mats only go to the bump in the floorboard, below the front lip of the factory bench seat. I am not aware of a reproduction rubber floor mat that goes to the gas tank. I know the reproduction carpets go all the way to the gas tank. Let me know if I can help you with this item or other 4-5-6 Chevy truck parts in the future.

02-12-2009, 08:30 PM	#13
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: '60-'63 Chevy/GMC rubber floor mat-low hump Offers? Attached Images

02-16-2009, 01:39 PM	#14
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: '60-'63 Chevy/GMC rubber floor mat-low hump $100.00, including shipping...

04-16-2009, 03:51 AM	#15
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: '60-'63 Chevy/GMC rubber floor mat-low hump What a deal...anyone?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.