Bdydrptk5, start of a happy ending - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lownfast · 11-10-2010, 10:21 PM

yes sir im on the north east side of fort worth.

dieselarmy13 · 11-11-2010, 12:10 AM

Truck looks great, love the color. Can't wait to see the whole thing done.

*nbpro* · 11-11-2010, 12:14 AM

Looking good!!!

bigwheel15 · 11-11-2010, 02:04 AM

Quote:

Originally Posted by lownfast

yes sir im on the north east side of fort worth.

Oh wow cool, then it is the truck. I actually live just down the street from where it used to be and it always peeked my interest.

Truck looks great by the way!

lownfast · 02-06-2011, 05:56 PM

not much to report but i have made some progress. I got the cam and springs installed, now i can get the brakes and steering column back in. hopefully it will start before my birthday in april.. we'll see.

here are a few pics for your viewing pleasure. '

Stock springs coming out

New LS6 springs going in.

GM Hotcam, no pics of the actual install,

and the column with some fresh paint

flamingbig10 · 02-06-2011, 06:00 PM

looking good, keep of the great work and what type of spring compressor did you use for your valve springs

lownfast · 02-12-2011, 11:50 PM

Its actually a procomp tool, it was less expensive than the comp cams tool on summit. I got it from pace performance for $87. But I dont suggest getting it from Pace unless you want to wait two weeks for it. Great tool though, super easy to use. I was worth every penny and more.

lownfast · 04-10-2011, 10:32 PM

HELP!!

I've got my 5.3 running with a harness from PSI (lt1conversion.com) and it works great but the engine won't turn off with the key. I have to unhook the battery to stop it. My fuel pump and PCM are hooked to switched 12v power. Has anyone delt with this? Any ideas on a fix?
Posted via Mobile Device

**FRENCHBLUE72** · 04-14-2011, 08:10 PM

Sounds like you may have power to the coils???? But I could be waaaaayyyy off base..

WillieloRidez · 04-16-2011, 10:00 AM

Sick blazer man hopefully I can do that with.mine some day
Posted via Mobile Device

lownfast · 04-24-2011, 10:32 PM

did a little tuning, still needs more, but im getting close

lownfast · 05-31-2011, 08:09 PM

i've picked up my very own paint gone, progress is coming soon!

anyone in the fort worth area want to help sand?

justpball · 06-02-2011, 06:05 PM

If I was closer I would help bro!
Posted via Mobile Device

lownfast · 09-19-2011, 09:53 PM

Please review the sticky posts.. Classified ads may only be posted in the classified sections. Thanks

made2drag · 06-20-2012, 09:20 AM

any new pics?

lownfast · 06-20-2012, 10:56 AM

The k5 has a new owner and resides in Oklahoma now, this was the last pic

I picked another toy to fill the void- check out my Chevelle build!

http://ls1tech.com/forums/conversion...e-ly6-t56.html
Posted via Mobile Device

jasonhall · 06-20-2012, 11:00 AM

Where at in Oklahoma ?
Posted via Mobile Device

lownfast · 06-20-2012, 11:12 AM

I'm not sure I'll text the guy and find out.
Posted via Mobile Device

jasonhall · 06-20-2012, 01:30 PM

Cool ... Hope to see it around
Posted via Mobile Device

lownfast · 08-22-2016, 04:01 PM

Quote:

Originally Posted by jasonhall

Cool ... Hope to see it around
Posted via Mobile Device

Scott Ivey was the guys name that bought it from me. He was from Wilburton. Unfortunately Scott and the k5 were lost in an accident. these are last few photos I have of the old blazer.

Such a tragic loss. Its been hard to think about all the work I and scott put into the k5 to make what it was. Its been years since the accident and I'm looking forward to the future and getting back into the truck scene. I'm undecided on starting a new build thread or continue on with the history of this one. We cant wait to see everyone at c10's in the park!

AnotherWs6 · 08-22-2016, 05:06 PM

That's terrible. I don't know how OK it is to post a picture of a crashed vehicle someone died in. My other two cents are that your signature should probably just end with - sold.

11-10-2010, 10:21 PM	#76
lownfast Gettinlow & Goinfast Join Date: Dec 2005 Location: ft. worth, tx Posts: 223	Re: Bdydrptk5, start of a happy ending yes sir im on the north east side of fort worth. __________________ Protouring Texas built rides- 78' K5 bodied on 22's, 5.3/ 4L60E- sold-Bdydrptk5- http://67-72chevytrucks.com/vboard/s...d.php?t=358390 71' Chevelle #Bigbootyjudy 6.0 LSx, LS9 heads, Magnuson, T56 - http://ls1tech.com/forums/conversion...e-ly6-t56.html 70' Chevelle #EvilAnnie Lsx/4L80/S475 turbo- 85' C20 crew, 5.3/6L90/S475 turbo- 68' C10 5.3/4L60/Level 2 coil overs Facebook- Protouringtexasdotcom Instagram- @Protouringtexas

11-11-2010, 12:10 AM	#77
dieselarmy13 Phone's ringin Dude. Join Date: Mar 2007 Location: Colorado Springs Posts: 1,426	Re: Bdydrptk5, start of a happy ending Truck looks great, love the color. Can't wait to see the whole thing done. __________________ I pitty the fool with only two headlights!! 2003 SILVERADO SS--THE NEW GIRL 1972 GMC--THE OLD GIRL

11-11-2010, 12:14 AM	#78
nbpro Account Suspended Join Date: Dec 2008 Location: Huntsville,AL Posts: 2,119	Re: Bdydrptk5, start of a happy ending Looking good!!!

02-06-2011, 05:56 PM	#80
lownfast Gettinlow & Goinfast Join Date: Dec 2005 Location: ft. worth, tx Posts: 223	Re: Bdydrptk5, start of a happy ending not much to report but i have made some progress. I got the cam and springs installed, now i can get the brakes and steering column back in. hopefully it will start before my birthday in april.. we'll see. here are a few pics for your viewing pleasure. ' Stock springs coming out New LS6 springs going in. GM Hotcam, no pics of the actual install, and the column with some fresh paint __________________ Protouring Texas built rides- 78' K5 bodied on 22's, 5.3/ 4L60E- sold-Bdydrptk5- http://67-72chevytrucks.com/vboard/s...d.php?t=358390 71' Chevelle #Bigbootyjudy 6.0 LSx, LS9 heads, Magnuson, T56 - http://ls1tech.com/forums/conversion...e-ly6-t56.html 70' Chevelle #EvilAnnie Lsx/4L80/S475 turbo- 85' C20 crew, 5.3/6L90/S475 turbo- 68' C10 5.3/4L60/Level 2 coil overs Facebook- Protouringtexasdotcom Instagram- @Protouringtexas

02-06-2011, 06:00 PM	#81
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: Bdydrptk5, start of a happy ending looking good, keep of the great work and what type of spring compressor did you use for your valve springs __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

02-12-2011, 11:50 PM	#82
lownfast Gettinlow & Goinfast Join Date: Dec 2005 Location: ft. worth, tx Posts: 223	Re: Bdydrptk5, start of a happy ending Its actually a procomp tool, it was less expensive than the comp cams tool on summit. I got it from pace performance for $87. But I dont suggest getting it from Pace unless you want to wait two weeks for it. Great tool though, super easy to use. I was worth every penny and more. __________________ Protouring Texas built rides- 78' K5 bodied on 22's, 5.3/ 4L60E- sold-Bdydrptk5- http://67-72chevytrucks.com/vboard/s...d.php?t=358390 71' Chevelle #Bigbootyjudy 6.0 LSx, LS9 heads, Magnuson, T56 - http://ls1tech.com/forums/conversion...e-ly6-t56.html 70' Chevelle #EvilAnnie Lsx/4L80/S475 turbo- 85' C20 crew, 5.3/6L90/S475 turbo- 68' C10 5.3/4L60/Level 2 coil overs Facebook- Protouringtexasdotcom Instagram- @Protouringtexas

04-10-2011, 10:32 PM	#83
lownfast Gettinlow & Goinfast Join Date: Dec 2005 Location: ft. worth, tx Posts: 223	Re: Bdydrptk5, start of a happy ending HELP!! I've got my 5.3 running with a harness from PSI (lt1conversion.com) and it works great but the engine won't turn off with the key. I have to unhook the battery to stop it. My fuel pump and PCM are hooked to switched 12v power. Has anyone delt with this? Any ideas on a fix? Posted via Mobile Device __________________ Protouring Texas built rides- 78' K5 bodied on 22's, 5.3/ 4L60E- sold-Bdydrptk5- http://67-72chevytrucks.com/vboard/s...d.php?t=358390 71' Chevelle #Bigbootyjudy 6.0 LSx, LS9 heads, Magnuson, T56 - http://ls1tech.com/forums/conversion...e-ly6-t56.html 70' Chevelle #EvilAnnie Lsx/4L80/S475 turbo- 85' C20 crew, 5.3/6L90/S475 turbo- 68' C10 5.3/4L60/Level 2 coil overs Facebook- Protouringtexasdotcom Instagram- @Protouringtexas

04-14-2011, 08:10 PM	#84
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: Bdydrptk5, start of a happy ending Sounds like you may have power to the coils???? But I could be waaaaayyyy off base.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

04-16-2011, 10:00 AM	#85
WillieloRidez Registered User Join Date: Feb 2010 Location: Wichita Kansas Posts: 667	Re: Bdydrptk5, start of a happy ending Sick blazer man hopefully I can do that with.mine some day Posted via Mobile Device __________________ WillieloRidez Drive em in Drag em out! Projects: 1956 Chevrolet 210 2dr post 58 chevrolet 2dr delray 58 chevrolet belair 4dr hardtop 1965 Chevelle big block 4spd 88 crewcab 1/2 ton long bed aka STRETCH Lt1-4l60e http://67-72chevytrucks.com/vboard/s...d.php?t=388445

04-24-2011, 10:32 PM	#86
lownfast Gettinlow & Goinfast Join Date: Dec 2005 Location: ft. worth, tx Posts: 223	Re: Bdydrptk5, start of a happy ending did a little tuning, still needs more, but im getting close __________________ Protouring Texas built rides- 78' K5 bodied on 22's, 5.3/ 4L60E- sold-Bdydrptk5- http://67-72chevytrucks.com/vboard/s...d.php?t=358390 71' Chevelle #Bigbootyjudy 6.0 LSx, LS9 heads, Magnuson, T56 - http://ls1tech.com/forums/conversion...e-ly6-t56.html 70' Chevelle #EvilAnnie Lsx/4L80/S475 turbo- 85' C20 crew, 5.3/6L90/S475 turbo- 68' C10 5.3/4L60/Level 2 coil overs Facebook- Protouringtexasdotcom Instagram- @Protouringtexas

05-31-2011, 08:09 PM	#87
lownfast Gettinlow & Goinfast Join Date: Dec 2005 Location: ft. worth, tx Posts: 223	Re: Bdydrptk5, start of a happy ending i've picked up my very own paint gone, progress is coming soon! anyone in the fort worth area want to help sand? __________________ Protouring Texas built rides- 78' K5 bodied on 22's, 5.3/ 4L60E- sold-Bdydrptk5- http://67-72chevytrucks.com/vboard/s...d.php?t=358390 71' Chevelle #Bigbootyjudy 6.0 LSx, LS9 heads, Magnuson, T56 - http://ls1tech.com/forums/conversion...e-ly6-t56.html 70' Chevelle #EvilAnnie Lsx/4L80/S475 turbo- 85' C20 crew, 5.3/6L90/S475 turbo- 68' C10 5.3/4L60/Level 2 coil overs Facebook- Protouringtexasdotcom Instagram- @Protouringtexas

06-02-2011, 06:05 PM	#88
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: Bdydrptk5, start of a happy ending If I was closer I would help bro! Posted via Mobile Device __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055

09-19-2011, 09:53 PM	#89
lownfast Gettinlow & Goinfast Join Date: Dec 2005 Location: ft. worth, tx Posts: 223	Re: Bdydrptk5, start of a happy ending Please review the sticky posts.. Classified ads may only be posted in the classified sections. Thanks __________________ Protouring Texas built rides- 78' K5 bodied on 22's, 5.3/ 4L60E- sold-Bdydrptk5- http://67-72chevytrucks.com/vboard/s...d.php?t=358390 71' Chevelle #Bigbootyjudy 6.0 LSx, LS9 heads, Magnuson, T56 - http://ls1tech.com/forums/conversion...e-ly6-t56.html 70' Chevelle #EvilAnnie Lsx/4L80/S475 turbo- 85' C20 crew, 5.3/6L90/S475 turbo- 68' C10 5.3/4L60/Level 2 coil overs Facebook- Protouringtexasdotcom Instagram- @Protouringtexas Last edited by Liz; 09-19-2011 at 11:00 PM. Reason: ad

06-20-2012, 09:20 AM	#90
made2drag Registered User Join Date: Nov 2009 Location: alabama Posts: 2,079	Re: Bdydrptk5, start of a happy ending any new pics? __________________ my 86 c10 build: http://67-72chevytrucks.com/vboard/s...d.php?t=496829 my 56 3100 build: http://67-72chevytrucks.com/vboard/s...09#post5712509 my 95 silverado build: http://67-72chevytrucks.com/vboard/s...35#post5879335 my gray 86 c10 http://67-72chevytrucks.com/vboard/s...34#post7624734

06-20-2012, 10:56 AM	#91
lownfast Gettinlow & Goinfast Join Date: Dec 2005 Location: ft. worth, tx Posts: 223	Re: Bdydrptk5, start of a happy ending The k5 has a new owner and resides in Oklahoma now, this was the last pic I picked another toy to fill the void- check out my Chevelle build! http://ls1tech.com/forums/conversion...e-ly6-t56.html Posted via Mobile Device __________________ Protouring Texas built rides- 78' K5 bodied on 22's, 5.3/ 4L60E- sold-Bdydrptk5- http://67-72chevytrucks.com/vboard/s...d.php?t=358390 71' Chevelle #Bigbootyjudy 6.0 LSx, LS9 heads, Magnuson, T56 - http://ls1tech.com/forums/conversion...e-ly6-t56.html 70' Chevelle #EvilAnnie Lsx/4L80/S475 turbo- 85' C20 crew, 5.3/6L90/S475 turbo- 68' C10 5.3/4L60/Level 2 coil overs Facebook- Protouringtexasdotcom Instagram- @Protouringtexas



Register or Log In To remove these advertisements.

06-20-2012, 11:00 AM	#92
jasonhall Registered User Join Date: May 2008 Location: Stillwater Oklahoma Posts: 829	Re: Bdydrptk5, start of a happy ending Where at in Oklahoma ? Posted via Mobile Device

06-20-2012, 11:12 AM	#93
lownfast Gettinlow & Goinfast Join Date: Dec 2005 Location: ft. worth, tx Posts: 223	Re: Bdydrptk5, start of a happy ending I'm not sure I'll text the guy and find out. Posted via Mobile Device __________________ Protouring Texas built rides- 78' K5 bodied on 22's, 5.3/ 4L60E- sold-Bdydrptk5- http://67-72chevytrucks.com/vboard/s...d.php?t=358390 71' Chevelle #Bigbootyjudy 6.0 LSx, LS9 heads, Magnuson, T56 - http://ls1tech.com/forums/conversion...e-ly6-t56.html 70' Chevelle #EvilAnnie Lsx/4L80/S475 turbo- 85' C20 crew, 5.3/6L90/S475 turbo- 68' C10 5.3/4L60/Level 2 coil overs Facebook- Protouringtexasdotcom Instagram- @Protouringtexas

06-20-2012, 01:30 PM	#94
jasonhall Registered User Join Date: May 2008 Location: Stillwater Oklahoma Posts: 829	Re: Bdydrptk5, start of a happy ending Cool ... Hope to see it around Posted via Mobile Device

08-22-2016, 05:06 PM	#96
AnotherWs6 Registered User Join Date: Feb 2016 Location: Westchester, NY Posts: 602	Re: Bdydrptk5, start of a happy ending That's terrible. I don't know how OK it is to post a picture of a crashed vehicle someone died in. My other two cents are that your signature should probably just end with - sold. __________________ 1968 C-10 Suburban - Original 396/TH400 2002 Transam WS6 - M6 - Black/Black - Evil Garage Queen 2000 Silverado - DD - Small lift+Body lift+35" Duratracs+4.88's + Eaton TruTrac - Monster Truck 2010 Cadillac CTS Wagon Sport - Wife's DD and the only classy car we have.

Register or Log In To remove these advertisements.