The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > Info Center > FAQ Truck Tech > Engine and Drivetrain

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Old 05-02-2012, 09:35 PM   #1
clinebarger
Senior Member
 
Join Date: May 2009
Location: Fort Worth, TX
Posts: 6,370
Transmission fluid - FYI

To read the original thread and discussion on this topic go here- LINK


Quote:
Originally Posted by Slammed72blazers View Post
what type of oil should i use for my Th350 automatic transmission 4x4? Does Dex/merc work or just Dexron atf, any opinions, thanks
Run Dexron III.

Cheap Aftermarket Dexron III "type" fluids are labeled DEX/MERC, And are NOT approved by any OEM. These fluids do work, BUT they are not tested to any standard, No viscosity or oxidation stability test. You have to trust a "bargain basement" fluid maker for their word.

Stay away from Dexron VI ATF, It has caused seal damage/hardening in some transmissions that were made before 2006, GM says its backward compatible, But they are not fixing any seal damage.

The ONLY Dexron III fluids to have a OEM licence are TES 295Fluids approved by Allison.
TES 295 Approved Automatic Transmission Fluids.
Castrol/Allison........................TranSynd
BP Lubricants.........................Autran Syn 295
Cognis Corporation..................Emgard 2805
International..........................Fleetrite Synthetic ATF
ExxonMobil.............................Mobil Delvac Synthetic ATF
John Deere & Company.............HD SynTran
Volvo Trucks North America.......Bulldog Synthetic ATF

Last edited by augie; 05-06-2012 at 10:12 PM.
clinebarger is offline  
Old 05-02-2012, 11:45 PM   #2
clinebarger
Senior Member
 
Join Date: May 2009
Location: Fort Worth, TX
Posts: 6,370
Transmission fluid - FYI

Quote:
Originally Posted by storm9c1 View Post
Is Dexron VI the new fancy synthetic stuff? Because I was told by a local shop to use the new synthetic stuff in my freshly rebuilt 4L80E (production date circa 1994, but rebuilt in 2010) on the initial fill. I already had plenty of stock of Dexron III in my garage, so I used that instead. It didn't feel right using an untried (by me) fluid in an older style trans that I just spent $$$$ to rebuild. I knew III would work, so I used it. I've also read that the synthetic stuff is great to run in any trans. Now I'm worried about what you are saying. Luckily I wasn't a guinea pig...
Dexron VI was formulated for Hydra-Matic 6-speeds....6L80E & 6L90E.
It has a special additive package to deal with "clutch to clutch shifting".
It is labeled a synthetic.....DEXRON-VI is not synthetic. It is made from a blend of Group II and Group III base oils plus the Dexron VI additives package. It does not contain any PAO (polyalphaolefin) found in group IV base oils.

A "true synthetic" uses Group IV base oils.
All TES-295 approved fluids use Group IV base oils plus a Dexron III additive package...Making them a Fully Synthetic Dexron III fluid.

Last edited by augie; 05-06-2012 at 10:10 PM.
clinebarger is offline  
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:32 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com