Appliance Slotted mags, lug nuts needed, 8 lug - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Joesjunk** · 12-04-2017, 09:24 PM

I have a set of 5 Appliance slotted mag wheels, 9.75x16.5. They use a shank lug nut I have never seen before. They are not the usual type of shank lug nuts. Any idea who might make these?

flashed · 12-04-2017, 09:28 PM

Check Summit Racing .Very similar to the Crager lug nuts on my Chevelle but different size and thats where I get mine .

**Joesjunk** · 12-04-2017, 09:39 PM

I'll check that

**Joesjunk** · 12-04-2017, 09:45 PM

Nothing at Summit........

KQQL IT · 12-04-2017, 09:57 PM

1/2 or 9/16

https://www.summitracing.com/parts/gor-75197xxb

**Joesjunk** · 12-04-2017, 10:20 PM

The shank diameter on mine is .860. Haven't found anything with that size shank

**jocko** · 12-04-2017, 10:24 PM

might try these guys Joe http://www.akhwheels.com/pages/misc.php?cat=10

CG · 12-04-2017, 10:25 PM

Any chance they are these?

https://coyoteaccessories.com/871187

KQQL IT · 12-04-2017, 10:26 PM

Summit has them that size. You can search by that shank size. Use the narrow you results option.
Are they 1/2 or 9/16 thread?

**71blksuper4x4** · 12-04-2017, 10:26 PM

Joe, did you check Gorilla?
http://www.gorilla-auto.com/lug-nuts

**Joesjunk** · 12-04-2017, 10:38 PM

Quote:

Originally Posted by jocko

might try these guys Joe http://www.akhwheels.com/pages/misc.php?cat=10

This place shows my exact lug nut, but not available. But they list a 2nd design. I'll call them tomorrow, thanks

**Joesjunk** · 12-04-2017, 10:42 PM

Quote:

Originally Posted by KQQL IT

Summit has them that size. You can search by that shank size. Use the narrow you results option.
Are they 1/2 or 9/16 thread?

They are 9/16", but none have that shank diameter.

KQQL IT · 12-05-2017, 12:26 AM

Quote:

Originally Posted by Joesjunk

They are 9/16", but none have that shank diameter.

I asked because our Frankenstein 68 is 1/2 in the back and 9/16 up front.

**Dustmaker65** · 12-05-2017, 10:49 AM

Hey Joe. I have a set of those lug nuts for an old set of Weld Wheels. I had to get a thicker washer so they did not bottom out. I believe they came from "JET"???

**Joesjunk** · 12-05-2017, 03:25 PM

Quote:

Originally Posted by jocko

might try these guys Joe http://www.akhwheels.com/pages/misc.php?cat=10

This guy said they haven't been made in 30 years! But he had 5 used ones, and that's all I needed to complete a set.

**jocko** · 12-05-2017, 04:05 PM

Excellent, glad to hear Joe.

**special-K** · 12-06-2017, 08:06 AM

It's been about 10 years, but I had a set of turbines I bought cheap and new because they had both the newer chamfered seat lugs and one that was bored for shank type lug nuts. After a mishap with a free tire rotation at Sears and another after a flat repair where the techs didn't get the differences, I mic'd the shank nut, got a drill bit that exact size, and bored all the wheels to take the shank type lugs...problem solved!

Is that a possibility? I could go get the size off the bit or some new shank type 9/16" nuts I have. Hopefully those you have aren't bigger diameter. I'm thinking the outer bore is too big, though.

weim55 · 12-07-2017, 08:44 PM

I have the same wheels in a 5 on 5. I've run into the same problem, these take a totally bastard lug nut. The problem is I can get a lug nut that will fit in the hole but there's no way you can get a socket on it because the nut sizes too big. Mine use a half inch stud and are going to need a 1/2 inch nut on the other side. A typical 13/16 nut for that half inch stud is going to be too big to fit a socket, even a thin chrome one,into the recess. Post a picture of the Lugnuts you get in the end, I'm curious.

Thanks, Steve weim55 Colorado

12-04-2017, 09:24 PM	#1
Joesjunk Senior Member Join Date: May 2001 Location: Independence MO. Posts: 7,689	Appliance Slotted mags, lug nuts needed, 8 lug I have a set of 5 Appliance slotted mag wheels, 9.75x16.5. They use a shank lug nut I have never seen before. They are not the usual type of shank lug nuts. Any idea who might make these? Attached Images __________________ 72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale

12-04-2017, 09:28 PM	#2
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,729	Re: Appliance Slotted mags, lug nuts needed, 8 lug Check Summit Racing .Very similar to the Crager lug nuts on my Chevelle but different size and thats where I get mine .

12-04-2017, 09:39 PM	#3
Joesjunk Senior Member Join Date: May 2001 Location: Independence MO. Posts: 7,689	Re: Appliance Slotted mags, lug nuts needed, 8 lug I'll check that __________________ 72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale

12-04-2017, 09:45 PM	#4
Joesjunk Senior Member Join Date: May 2001 Location: Independence MO. Posts: 7,689	Re: Appliance Slotted mags, lug nuts needed, 8 lug Nothing at Summit........ __________________ 72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale

12-04-2017, 09:57 PM	#5
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,128	Re: Appliance Slotted mags, lug nuts needed, 8 lug 1/2 or 9/16 https://www.summitracing.com/parts/gor-75197xxb __________________ " That didnt make it any newer " " Dont antique the equipment "

12-04-2017, 10:20 PM	#6
Joesjunk Senior Member Join Date: May 2001 Location: Independence MO. Posts: 7,689	Re: Appliance Slotted mags, lug nuts needed, 8 lug The shank diameter on mine is .860. Haven't found anything with that size shank __________________ 72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale Last edited by Joesjunk; 12-04-2017 at 10:28 PM.

12-04-2017, 10:24 PM	#7
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,933	Re: Appliance Slotted mags, lug nuts needed, 8 lug might try these guys Joe http://www.akhwheels.com/pages/misc.php?cat=10

12-04-2017, 10:25 PM	#8
CG BlahBlahBlah Join Date: Feb 2002 Location: Monroe, Wa. Posts: 19,769	Re: Appliance Slotted mags, lug nuts needed, 8 lug Any chance they are these? https://coyoteaccessories.com/871187 __________________ … … … … … … … … ... … … … … … … … … … … … Monroe Swap meet May 18-19. Mike has the same spots for the NW guys he's had forever. Lunch time BBQ at the spaces. If you have stuff to sell bring it along. If you have a question PM stllookn (Mike) here via the board. https://67-72chevytrucks.com/vboard/...d.php?t=851291

12-04-2017, 10:26 PM	#9
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,128	Re: Appliance Slotted mags, lug nuts needed, 8 lug Summit has them that size. You can search by that shank size. Use the narrow you results option. Are they 1/2 or 9/16 thread? __________________ " That didnt make it any newer " " Dont antique the equipment "

12-04-2017, 10:26 PM	#10
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,149	Re: Appliance Slotted mags, lug nuts needed, 8 lug Joe, did you check Gorilla? http://www.gorilla-auto.com/lug-nuts __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

12-05-2017, 10:49 AM	#14
Dustmaker65 Senior Member Join Date: Jan 2015 Location: Marquette Heights, IL. Posts: 1,135	Re: Appliance Slotted mags, lug nuts needed, 8 lug Hey Joe. I have a set of those lug nuts for an old set of Weld Wheels. I had to get a thicker washer so they did not bottom out. I believe they came from "JET"??? __________________ Jimmy Hoelzel

12-05-2017, 04:05 PM	#16
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,933	Re: Appliance Slotted mags, lug nuts needed, 8 lug Excellent, glad to hear Joe.

12-06-2017, 08:06 AM	#17
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: Appliance Slotted mags, lug nuts needed, 8 lug It's been about 10 years, but I had a set of turbines I bought cheap and new because they had both the newer chamfered seat lugs and one that was bored for shank type lug nuts. After a mishap with a free tire rotation at Sears and another after a flat repair where the techs didn't get the differences, I mic'd the shank nut, got a drill bit that exact size, and bored all the wheels to take the shank type lugs...problem solved! Is that a possibility? I could go get the size off the bit or some new shank type 9/16" nuts I have. Hopefully those you have aren't bigger diameter. I'm thinking the outer bore is too big, though. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 12-06-2017 at 08:11 AM.

12-07-2017, 08:44 PM	#18
weim55 Registered User Join Date: Jan 2017 Location: Larkspur, Colorado Posts: 904	Re: Appliance Slotted mags, lug nuts needed, 8 lug I have the same wheels in a 5 on 5. I've run into the same problem, these take a totally bastard lug nut. The problem is I can get a lug nut that will fit in the hole but there's no way you can get a socket on it because the nut sizes too big. Mine use a half inch stud and are going to need a 1/2 inch nut on the other side. A typical 13/16 nut for that half inch stud is going to be too big to fit a socket, even a thin chrome one,into the recess. Post a picture of the Lugnuts you get in the end, I'm curious. Thanks, Steve weim55 Colorado



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.