The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board > projects and builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-13-2017, 09:49 AM   #26
Robert Haas
Registered User
 
Join Date: Mar 2014
Location: Salinas Ca.
Posts: 171
Re: Two is easier then one 1965 GMC S/W/BB build

Quote:
Originally Posted by Captainfab View Post
The dustless sandblasting just uses water along with the blast media. What I have seen done, leaves quite a bit of caked on blast media in the corners and crevasses that is a bit of a pain to take care of. I assume that you are aware that not all blasters know what they are doing on sheetmetal and not all do a thorough job? Also I would not allow anyone to use silica sand as an abrasive. Reason being that not all primers, particularly epoxy, is compatible with a surface that has silica imbeded into the metal. Yes the silica does get into the base metal.

Mobile Soda blasting is what I was considering, however these dry ice blasters seem like the best of both worlds.
Robert Haas is online now   Reply With Quote
Old 09-13-2017, 05:11 PM   #27
scoot_mcgrute
Registered User
 
Join Date: Apr 2004
Location: Tigard, Or
Posts: 380
Re: Two is easier then one 1965 GMC S/W/BB build

What frame and suspension will be going under the race truck?
__________________
1966 Army Truck
http://67-72chevytrucks.com/vboard/s...d.php?t=691778
scoot_mcgrute is offline   Reply With Quote
Old 09-13-2017, 08:48 PM   #28
Robert Haas
Registered User
 
Join Date: Mar 2014
Location: Salinas Ca.
Posts: 171
Re: Two is easier then one 1965 GMC S/W/BB build

Quote:
Originally Posted by scoot_mcgrute View Post
What frame and suspension will be going under the race truck?

We will be building a mostly one off program. Rob @ No Limit Engineering has been fantastic in terms of technical knowledge and I bought the Fat Bar 4 Bar kit from him as a starting point out back. Moser Supplied a narrowed 9" and Rob's people welded on the tabs.

Truck will be on coil overs on all four corners. Penski will be helping us with some 4 way adjustable's too.

Up front The wide ride from No Limit with a splined sway bar as well as Wilwood on all 4 corners.
Robert Haas is online now   Reply With Quote
Old 09-14-2017, 12:26 AM   #29
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 19,951
Re: Two is easier then one 1965 GMC S/W/BB build

I don't know anything about dry ice blasting. Soda does not remove rust very well and I would not use it for that and other reasons.

Quote:
Originally Posted by Robert Haas View Post
Mobile Soda blasting is what I was considering, however these dry ice blasters seem like the best of both worlds.
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old Yesterday, 08:38 PM   #30
Robert Haas
Registered User
 
Join Date: Mar 2014
Location: Salinas Ca.
Posts: 171
Re: Two is easier then one 1965 GMC S/W/BB build

Greg and I decided that we would invest in building an actual frame jig. Something that will become a fixture that we can not only build a truck on it, but use it as a measurable apparatus to lay out and build our frames, suspension and exhaust systems on it.

I chose to use H-Beam with a 6" web over traditional I-beam as the flange is more suited to clamping being parallel with the top face. In this shot you can see one of the 6 legs. The Legs are 6" x 2" 1/4" wall mild steel tube.

Name:  20170914_124045.jpg
Views: 32
Size:  110.4 KB

1 of the center legs with the adjustable pads I sourced from McMaster Carr

Name:  20170915_080530.jpg
Views: 32
Size:  63.8 KB

The end legs will have offset pads to clear the lowering caster (you will see more of that later)

Name:  20170915_080522.jpg
Views: 32
Size:  67.1 KB

The other end.

Name:  20170915_080507.jpg
Views: 32
Size:  75.8 KB


Standing on its feet for the first time
Name:  20170915_080450.jpg
Views: 32
Size:  65.2 KB


At 17 feet long and 4 feet wide it is a beast. It will consume some shop space for sure
Robert Haas is online now   Reply With Quote
Old Yesterday, 08:54 PM   #31
Robert Haas
Registered User
 
Join Date: Mar 2014
Location: Salinas Ca.
Posts: 171
Re: Two is easier then one 1965 GMC S/W/BB build

Here it is sitting in it's home.


Name:  20170917_150308.jpg
Views: 32
Size:  50.6 KB


Name:  20170917_150746.jpg
Views: 32
Size:  61.6 KB

Name:  20170917_150325.jpg
Views: 32
Size:  50.0 KB

Name:  20170917_150417.jpg
Views: 32
Size:  45.1 KB

Last edited by Robert Haas; Yesterday at 09:05 PM.
Robert Haas is online now   Reply With Quote
Old Yesterday, 09:00 PM   #32
Robert Haas
Registered User
 
Join Date: Mar 2014
Location: Salinas Ca.
Posts: 171
Re: Two is easier then one 1965 GMC S/W/BB build

Details of the caster plates. Using an 8 ton hydraulic jack I can lock the casters in the down position, lifting the pads 2" off the ground. The casters are rated to 3,000 Lbs. each so this rig will roll rather easily even with a full size truck sitting on top of it.

Name:  20170917_142446.jpg
Views: 32
Size:  43.1 KB

Name:  20170917_142159.jpg
Views: 32
Size:  60.1 KB

Name:  20170917_142207.jpg
Views: 32
Size:  54.0 KB
Robert Haas is online now   Reply With Quote
Old Today, 12:43 AM   #33
rvrfoot
Senior Member
 
Join Date: Oct 2016
Location: san bernardino ca
Posts: 768
Re: Two is easier then one 1965 GMC S/W/BB build

I hope them trucks turn out as nice as that shop.
rvrfoot is offline   Reply With Quote
Old Today, 07:42 AM   #34
timmytimm3
Senior Member
 
Join Date: Apr 2012
Location: CT
Posts: 228
Re: Two is easier then one 1965 GMC S/W/BB build

Awesome frame jig. Great idea using the jacks to raise it up like that
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=742865
- FULL CIRCLE -
66 SWB, C4 Dropmember

"If you don't have time to do it right the first time, when will you?" -Dad
timmytimm3 is offline   Reply With Quote
Old Today, 09:41 AM   #35
Robert Haas
Registered User
 
Join Date: Mar 2014
Location: Salinas Ca.
Posts: 171
Re: Two is easier then one 1965 GMC S/W/BB build

Quote:
Originally Posted by rvrfoot View Post
I hope them trucks turn out as nice as that shop.
After all the work we put into building the shop, the truck builds are easy
Robert Haas is online now   Reply With Quote
Old Today, 09:42 AM   #36
Robert Haas
Registered User
 
Join Date: Mar 2014
Location: Salinas Ca.
Posts: 171
Re: Two is easier then one 1965 GMC S/W/BB build

Quote:
Originally Posted by timmytimm3 View Post
Awesome frame jig. Great idea using the jacks to raise it up like that

Thank you, simple ideas from a simple builder.
Robert Haas is online now   Reply With Quote
Old Today, 12:43 PM   #37
rvrfoot
Senior Member
 
Join Date: Oct 2016
Location: san bernardino ca
Posts: 768
Re: Two is easier then one 1965 GMC S/W/BB build

Very nice shop.
rvrfoot is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:52 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 1997-2013 67-72chevytrucks.com