mounting bags on porterbuilt trailing arm - The 1947 - Present Chevrolet & GMC Truck Message Board Network

baggedbigblock · 11-25-2015, 12:07 AM

I have a non Porterbuilt C notch and a have standard firestone 2600 bags, not the sleeve style I see above the axle. I am waiting on my trailing arms to come in.
I want to mount them forward of the axle, but as close as possible. I am looking for a clean install. Thanks in advance for any pictures.

baggedbigblock · 11-28-2015, 12:09 AM

Bump

SCOTI · 11-28-2015, 11:03 AM

What year/model truck are you installing the PB Truck-Arms on? His arms locate the spring in the original location which is slightly in front of the rear axle unless you're purchasing one of the 'Extreme DM rear kits' (which does relocate & use sleeve type bags.

baggedbigblock · 11-28-2015, 12:46 PM

I have a 66 swb with a big notch from suicide bro. I think I am going to mount in front of axle with a bag plate on arm and inner frame

SCOTI · 11-28-2015, 01:18 PM

Again..... original placement is in front of the rear-end.

If you're trying to lay the frame on the ground by relocating the bags farther forward on the T/A & making new upper mounts inside of the frame, I would contact 'Porterbuilt Fab'. Get your info from the source. He would be the best guy to answer the question.

Good luck....

baggedbigblock · 11-28-2015, 01:21 PM

Will do, thanks

mel knippson · 09-26-2017, 04:51 PM

SO what happened .. what did yo do ?

mel knippson · 09-26-2017, 04:52 PM

so what did ya end up doing ?

11-25-2015, 12:07 AM	#1
baggedbigblock Registered User Join Date: Oct 2010 Location: Rich Virginia Posts: 336	mounting bags on porterbuilt trailing arm I have a non Porterbuilt C notch and a have standard firestone 2600 bags, not the sleeve style I see above the axle. I am waiting on my trailing arms to come in. I want to mount them forward of the axle, but as close as possible. I am looking for a clean install. Thanks in advance for any pictures.

11-28-2015, 12:09 AM	#2
baggedbigblock Registered User Join Date: Oct 2010 Location: Rich Virginia Posts: 336	Re: mounting bags on porterbuilt trailing arm Bump

11-28-2015, 11:03 AM	#3
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,907	Re: mounting bags on porterbuilt trailing arm What year/model truck are you installing the PB Truck-Arms on? His arms locate the spring in the original location which is slightly in front of the rear axle unless you're purchasing one of the 'Extreme DM rear kits' (which does relocate & use sleeve type bags. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

11-28-2015, 12:46 PM	#4
baggedbigblock Registered User Join Date: Oct 2010 Location: Rich Virginia Posts: 336	Re: mounting bags on porterbuilt trailing arm I have a 66 swb with a big notch from suicide bro. I think I am going to mount in front of axle with a bag plate on arm and inner frame

11-28-2015, 01:18 PM	#5
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,907	Re: mounting bags on porterbuilt trailing arm Again..... original placement is in front of the rear-end. If you're trying to lay the frame on the ground by relocating the bags farther forward on the T/A & making new upper mounts inside of the frame, I would contact 'Porterbuilt Fab'. Get your info from the source. He would be the best guy to answer the question. Good luck.... __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

11-28-2015, 01:21 PM	#6
baggedbigblock Registered User Join Date: Oct 2010 Location: Rich Virginia Posts: 336	Re: mounting bags on porterbuilt trailing arm Will do, thanks

09-26-2017, 04:51 PM	#7
mel knippson Registered User Join Date: Sep 2017 Location: CLIFTON TX Posts: 105	Re: mounting bags on porterbuilt trailing arm SO what happened .. what did yo do ?

09-26-2017, 04:52 PM	#8
mel knippson Registered User Join Date: Sep 2017 Location: CLIFTON TX Posts: 105	Re: mounting bags on porterbuilt trailing arm so what did ya end up doing ?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.