under bed floor cross sill supports - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mickeykreg · 01-06-2018, 11:54 PM

I think this piece is also used in trucks so I put this on the truck side. Pic is the floor out of my '77 blazer front edge is up in the photo. Anyone found a close replacement for this piece. (maybe a galvanized sign post?

) I found the smaller one through Auto Metal Direct.

andyh1956 · 01-07-2018, 12:26 AM

Can you go down to your local sheet metal place & have them brake you out a couple angles & weld them together & make one?

mickeykreg · 01-07-2018, 08:49 PM

Quote:

Originally Posted by andyh1956

Can you go down to your local sheet metal place & have them brake you out a couple angles & weld them together & make one?

That's a pretty good idea. Sometimes the simple things are a bit elusive.

01-06-2018, 11:54 PM	#1
mickeykreg Registered User Join Date: Mar 2009 Location: salt lake city, utah Posts: 208	under bed floor cross sill supports I think this piece is also used in trucks so I put this on the truck side. Pic is the floor out of my '77 blazer front edge is up in the photo. Anyone found a close replacement for this piece. (maybe a galvanized sign post? ) I found the smaller one through Auto Metal Direct. __________________ '80 SRW C35 - 355/700R4/4:11/2.5-3/DD '77 Cheyenne K5 - Roller cam 355/NV4500/205/4:88's/35's/DD rust repair on the '77 http://67-72chevytrucks.com/vboard/s...d.php?t=740291

01-07-2018, 12:26 AM	#2
andyh1956 Registered User Join Date: Mar 2010 Location: thomastown mississippi Posts: 1,261	Re: under bed floor cross sill supports Can you go down to your local sheet metal place & have them brake you out a couple angles & weld them together & make one?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.