PA Another 72 part out have to thin the herd - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**1rippen6** · 08-21-2018, 01:58 PM

Frame is gone will have brackets when I get that far.

Door panels are chalky 40 plus shipping

Reinforcement plates 58 shipped

Seats with brackets, PS will need skirt work 700 plus shipping

Possibly keeping the windshield frame for myself

No tow hooks or inside tire carrier

Single wall top 300 needs repairs and no mounting strips

Non gauge dash 25 plus shipping

**1rippen6** · 08-21-2018, 01:59 PM

last

**71K5Randy** · 08-21-2018, 02:14 PM

Gas tank straps, hardware, and filler tube?
How is the right rear bed corner around the tail light?

mgkgmc · 08-21-2018, 02:15 PM

Would you sell the plastic seat backs separately?

**71K5Randy** · 08-21-2018, 02:17 PM

Jack, handle, and lug wrench?

GSD Guy · 08-21-2018, 02:49 PM

I'd be interested in the plastic seat backs also. Are rear seat armrests for sale?

The Pitt · 08-21-2018, 02:51 PM

Do you have a steering center link?

**jaybatta** · 08-21-2018, 03:41 PM

How are both ds and ps mirrors, backing plate and hardware? Dont suppose there is a underdash speaker? $ shipped to Livingston MT?

Thanks

Joe

**1rippen6** · 08-21-2018, 03:42 PM

Quote:

Originally Posted by 71K5Randy

Gas tank straps, hardware, and filler tube?
How is the right rear bed corner around the tail light?

Already gone but might have another set, will check the bed corner tomorrow

Quote:

Originally Posted by mgkgmc

Would you sell the plastic seat backs separately?

Yes I will let me get some pictures

Quote:

Originally Posted by GSD Guy

I'd be interested in the plastic seat backs also. Are rear seat armrests for sale?

No rear arm rest

Quote:

Originally Posted by The Pitt

Do you have a steering center link?

I will check it tomorrow it may be bent.

Killer Bee · 08-21-2018, 04:17 PM

I'll get in line behind Jay this time for the sport mirrors, plates and screws pending condition, price, and shipping 90744 commercial..

not sure what happened to the last set we asked about, thread went 'poof!'

**1968k20** · 08-21-2018, 04:24 PM

Will you seperate the seat brackets?

**jimer1964** · 08-21-2018, 06:00 PM

Interested in bucket seats and tracks. I will take the door reinforcement plates when you get a chance to remove them.

72k5ls · 08-21-2018, 06:08 PM

I am interested in the top but would you be up to shipping it. What is wrong with the top?

**jimer1964** · 08-21-2018, 06:22 PM

Have a friend interested in the seats when you get chance can you post pictures of the skirt that needs work?

**1rippen6** · 08-21-2018, 06:28 PM

Quote:

Originally Posted by jimer1964

Have a friend interested in the seats when you get chance can you post pictures of the skirt that needs work?

Below is the link to the pictures of the seat. I did find a leg for the passenger side so all the brackets are good. Let me know if you need more pictures.

http://67-72chevytrucks.com/vboard/s...d.php?t=767325

**1rippen6** · 08-21-2018, 06:30 PM

Quote:

Originally Posted by 72k5ls

I am interested in the top but would you be up to shipping it. What is wrong with the top?

I will get you some pictures

**1rippen6** · 08-21-2018, 06:30 PM

Quote:

Originally Posted by 1968k20

Will you seperate the seat brackets?

Plan is to sell them with the seats

**1rippen6** · 08-21-2018, 06:31 PM

Quote:

Originally Posted by jaybatta

How are both ds and ps mirrors, backing plate and hardware? Dont suppose there is a underdash speaker? $ shipped to Livingston MT?

Thanks

Joe

Will look at the tomorrow and let you know.

**richard2717** · 08-21-2018, 07:01 PM

How are the fenders?

dirish · 08-21-2018, 07:04 PM

Any cst rear panel brackets or top trim pieces?

**1rippen6** · 08-21-2018, 07:17 PM

Quote:

Originally Posted by richard2717

How are the fenders?

Drivers side is decent but I plan on using it. I would trade for a comparable fender if that's the color your looking for but it had a repaint at some point in its life.

**1rippen6** · 08-21-2018, 07:18 PM

Quote:

Originally Posted by dirish

Any cst rear panel brackets or top trim pieces?

Sorry, already gone.

best view · 08-21-2018, 07:37 PM

front seat belts

**1rippen6** · 08-21-2018, 07:38 PM

Quote:

Originally Posted by best view

front seat belts

Yes in parchment

**richard2717** · 08-21-2018, 07:40 PM

Quote:

Originally Posted by 1rippen6

Sorry, already gone.

Ok thanks still chasing a couple original paints
Thanks Richard

08-21-2018, 01:58 PM	#1
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,703	Another 72 part out have to thin the herd Frame is gone will have brackets when I get that far. Door panels are chalky 40 plus shipping Reinforcement plates 58 shipped Seats with brackets, PS will need skirt work 700 plus shipping Possibly keeping the windshield frame for myself No tow hooks or inside tire carrier Single wall top 300 needs repairs and no mounting strips Non gauge dash 25 plus shipping Attached Images

08-21-2018, 01:59 PM	#2
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,703	Re: Another 72 part out have to thin the herd last Attached Images

08-21-2018, 02:14 PM	#3
71K5Randy Senior Member Join Date: Aug 2015 Location: Belleville, IL (St. Louis metro) Posts: 724	Re: Another 72 part out have to thin the herd Gas tank straps, hardware, and filler tube? How is the right rear bed corner around the tail light? __________________ 71 K5 CST Blazer 350 70 Suburban 350 71 Chevelle SS 454 69 Olds 442 454 (yes, Chevy power!) 68 Camaro RS 327 66 Chevelle SS 396 Members I have met: 62cdan, 60case, daddymoo2, aotte1, 70shortfleet, countr, Cowboy#40, chevy71super, davischevy

08-21-2018, 02:15 PM	#4
mgkgmc Registered User Join Date: Dec 2007 Location: Glendale Arizona Posts: 1,354	Re: Another 72 part out have to thin the herd Would you sell the plastic seat backs separately? __________________ 1970 GMC 1500 stepside 1972 GMC Jimmy Custom 2004 Chevy Colorado 1989 Swb Silverado 1972 Aj's Stormer

08-21-2018, 02:17 PM	#5
71K5Randy Senior Member Join Date: Aug 2015 Location: Belleville, IL (St. Louis metro) Posts: 724	Re: Another 72 part out have to thin the herd Jack, handle, and lug wrench? __________________ 71 K5 CST Blazer 350 70 Suburban 350 71 Chevelle SS 454 69 Olds 442 454 (yes, Chevy power!) 68 Camaro RS 327 66 Chevelle SS 396 Members I have met: 62cdan, 60case, daddymoo2, aotte1, 70shortfleet, countr, Cowboy#40, chevy71super, davischevy

08-21-2018, 02:49 PM	#6
GSD Guy Registered User Join Date: Jul 2010 Location: Jacksonville, FL Posts: 85	Re: Another 72 part out have to thin the herd I'd be interested in the plastic seat backs also. Are rear seat armrests for sale?

08-21-2018, 02:51 PM	#7
The Pitt Registered User Join Date: May 2009 Location: USA Posts: 36	Re: Another 72 part out have to thin the herd Do you have a steering center link?

08-21-2018, 03:41 PM	#8
jaybatta Senior Member Join Date: Apr 2014 Location: Livingston, MT Posts: 834	Re: Another 72 part out have to thin the herd How are both ds and ps mirrors, backing plate and hardware? Dont suppose there is a underdash speaker? $ shipped to Livingston MT? Thanks Joe __________________ Joe 1968 K20 1970 K20 Semper Fi Last edited by jaybatta; 08-21-2018 at 03:56 PM.

08-21-2018, 04:17 PM	#10
Killer Bee Registered User Join Date: Jan 2016 Location: Barber City, CA Posts: 4,727	Re: Another 72 part out have to thin the herd I'll get in line behind Jay this time for the sport mirrors, plates and screws pending condition, price, and shipping 90744 commercial.. not sure what happened to the last set we asked about, thread went 'poof!' __________________ *I started out with nothing - and I still have most of it*

08-21-2018, 04:24 PM	#11
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,618	Re: Another 72 part out have to thin the herd Will you seperate the seat brackets? __________________ 1977 Chevrolet K10 SWB Project 350/4spd/np205 1977 Chevrolet K20 LWB 350/350/203 1991 4Runner 22RE 5 SPD Yanmar Tractor 3 Cyl Diesel

08-21-2018, 06:00 PM	#12
jimer1964 Senior Member Join Date: Jan 2007 Location: bowmansville,pa Posts: 1,676	Re: Another 72 part out have to thin the herd Interested in bucket seats and tracks. I will take the door reinforcement plates when you get a chance to remove them.

08-21-2018, 06:08 PM	#13
72k5ls Registered User Join Date: Oct 2015 Location: Conroe,TX Posts: 63	Re: Another 72 part out have to thin the herd I am interested in the top but would you be up to shipping it. What is wrong with the top?

08-21-2018, 06:22 PM	#14
jimer1964 Senior Member Join Date: Jan 2007 Location: bowmansville,pa Posts: 1,676	Re: Another 72 part out have to thin the herd Have a friend interested in the seats when you get chance can you post pictures of the skirt that needs work?

08-21-2018, 07:01 PM	#19
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,883	Re: Another 72 part out have to thin the herd How are the fenders? __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

08-21-2018, 07:04 PM	#20
dirish Registered User Join Date: Dec 2012 Location: Heart of Tennessee Posts: 1,124	Re: Another 72 part out have to thin the herd Any cst rear panel brackets or top trim pieces?



Register or Log In To remove these advertisements.

08-21-2018, 07:37 PM	#23
best view Registered User Join Date: Apr 2009 Location: newbury new hampsire Posts: 1,985	Re: Another 72 part out have to thin the herd front seat belts

Register or Log In To remove these advertisements.