|
04-23-2003, 12:11 AM
|
#1 |
|
what would Neal do?
Join Date: Sep 2002
Location: Winnipeg, Manitoba, Canada
Posts: 150
|
shaving bumper bolts
i'm using a cutoff wheel and it's taking a long, hard time with a good bit of gouging into the bumper. nothing that a little welding can't fix but still, can anyone suggest any other methods or tips?
__________________
1968 GMC 910 Long Step 250/3onTree 1969 Chevy C10 longfleet, 350/350 |
|
|
|
04-23-2003, 12:12 AM
|
#2 |
|
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
You grinding the head off and welding them from the back side?
|
|
|
|
|
04-23-2003, 10:09 AM
|
#3 |
|
Account Suspended
Join Date: Mar 2001
Location: Virginia Beach, Va. U.S.A.
Posts: 15,320
|
Put the bolt behind the bumper, fill the square hole in with the welder, and grind smooth with a disk sanded and a 100 grit disk.
|
|
|
|
|
04-23-2003, 10:12 AM
|
#4 |
|
Seņor Member
Join Date: May 2002
Location: Edge of the world
Posts: 5,367
|
Somewhat like Randy suggests... use a bench grinder to square up the bolt head, then slip it in from behind.
__________________
|
|
|
|
|
04-23-2003, 10:04 PM
|
#5 |
|
what would Neal do?
Join Date: Sep 2002
Location: Winnipeg, Manitoba, Canada
Posts: 150
|
sounds like good adivce, thanks guys.
__________________
1968 GMC 910 Long Step 250/3onTree 1969 Chevy C10 longfleet, 350/350 |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
