The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board > projects and builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-15-2017, 12:31 AM   #1
Howell1988
Registered User
 
Howell1988's Avatar
 
Join Date: Aug 2014
Location: West plains missouri
Posts: 63
Smile 65 long bed fleetside!!! I'm baaaccckk!!#fathersdaygiftrebuild

So my dad bought me for Father's Day a 65 long bed half ton Chevy for 500 bucks it starts and runs as the three on the tree and a 250 cubic inch straight 6. It's a two owner truck all original no Bondo and has been sitting for 5 years I went and put some new gas in it fired right up lots of popping to be expected but ran like a champ for a little while couldn't get it to take off figures the carburetor has issues so it won't keep her running today I just found out the pumping the hell out of the brakes and putting new fluid in it was all she needed to get the brakes going again of course there's going to have to be some upgrades but for now it's good to go to get moving around to get started on the body work.
I'll post more later on this weekend it's great to be back!!!!
Attached Images
     
__________________
You've got to see the potential in this build, at least that's what I keep telling her. Whether she'll ever see it i don't know.
Howell1988 is offline   Reply With Quote
Old 07-15-2017, 12:42 AM   #2
Howell1988
Registered User
 
Howell1988's Avatar
 
Join Date: Aug 2014
Location: West plains missouri
Posts: 63
Smile Re: 65 long bed fleetside!!! I'm baaaccckk!!#fathersdaygiftrebuild

Oh yeah here's a shot of the passenger side the only Fender that's heavily damaged that can't be fixed without just being replaced is the passenger side plan on doing patch panels almost everything going to try to give it that old school look not quite sure what I want to do with paint but we got a 350 bored 40 over with a mild cam about 2,200 miles on it and a slap shift automatic transmission not sure what kind but dad's got it covered the engine came out of my first truck when I was 18 and I literally only drove it maybe 1200 miles the engine got pulled and it's been sitting in the shop ever since I was 18 since I wrecked the S15 that the engine was in by the one time I floor boarded it sitting at a dead stop its spun on a dime and hit a ditch face first so we pulled the engine and left it in the shop in 2015 when I was 27 we decided to order a $600 lower end rebuild kit because my uncle had used the engine for about 800 miles worth of driving before he wore a lobe off the cam driving the engine in reverse for a couple miles but after the rebuilding engines running strong and I wish I could post a video of it on here I actually got a couple videos I'd like to post of the old truck just haven't figured out how to do it yet I got big plans they won't cost a lot just want to make it a daily driver that runs like a beast looks like an old beater drivetrain is ready and waiting in the shop but still got to figure out brakes shocks all that little stuff she's going to need a new windshield because it's cracked and a new window in the passenger side door got busted out by a lawnmower couple years ago so she's taking a little rust in the cab on the passenger side. I posted a couple pictures of it before I got it home as you can tell she was just sitting in the woods on all Flats and of course one of those crank jacks up the rear on the bumper there that thing came in handy though to get it off that muddy ground on the front end and get a Big Jack under to put the Rally's on it can't wait to get the ralleys cleaned up too and slap some different tires on there well good night it's almost midnight here I'll be adding more soon this weekend thanks and again it's good to be back on this forum
Attached Images
    
__________________
You've got to see the potential in this build, at least that's what I keep telling her. Whether she'll ever see it i don't know.

Last edited by Howell1988; 07-15-2017 at 12:49 AM.
Howell1988 is offline   Reply With Quote
Old 07-16-2017, 07:25 PM   #3
rusty76
Registered User
 
rusty76's Avatar
 
Join Date: Sep 2012
Location: Midway, NC
Posts: 2,762
Re: 65 long bed fleetside!!! I'm baaaccckk!!#fathersdaygiftrebuild

I'll ride. Get us some more pics posted up. Cool ride.
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=581873
The low buck build threads. Check'em out!
http://67-72chevytrucks.com/vboard/s...d.php?t=666022
My build thread
Crossmembers CC
rusty76 is offline   Reply With Quote
Old 07-17-2017, 01:52 AM   #4
Howell1988
Registered User
 
Howell1988's Avatar
 
Join Date: Aug 2014
Location: West plains missouri
Posts: 63
Talking Re: 65 long bed fleetside!!! I'm baaaccckk!!#fathersdaygiftrebuild

Thanks I just changed the oil and filter in her and both fuel filters then found with my dad that the fuel pump is bad so tomorrow buy a pump and try again.
__________________
You've got to see the potential in this build, at least that's what I keep telling her. Whether she'll ever see it i don't know.
Howell1988 is offline   Reply With Quote
Old 07-17-2017, 11:29 PM   #5
Howell1988
Registered User
 
Howell1988's Avatar
 
Join Date: Aug 2014
Location: West plains missouri
Posts: 63
Smile Re: 65 long bed fleetside!!! I'm baaaccckk!!#fathersdaygiftrebuild

So I managed to change the fuel pump tonight and of course when trying to take the fuel line out of the pump the nut was so seized up that it bent the fuel line all to crap and twisted it off my dad just happened to have some line in the shop and the brass fittings so got that fixed manage to get it hooked up with just the light of my cell phone hoping I didn't cross thread the nut into the fuel pump dad says we will check it out tomorrow I went to start it to see if I had any leaks and of course the battery was dead so had to call it a night think I found a couple replacement fenders on here from an awesome guy in Arizona excited to purchase these fenders as soon as possible here's some pics from this afternoon. Oh and I also found out the engine is out a of Chevy nova just wish I could post the video of the engine it's going in it I guess the file is too large
Attached Images
     
__________________
You've got to see the potential in this build, at least that's what I keep telling her. Whether she'll ever see it i don't know.

Last edited by Howell1988; 07-20-2017 at 01:42 AM.
Howell1988 is offline   Reply With Quote
Old 07-18-2017, 01:01 AM   #6
Howell1988
Registered User
 
Howell1988's Avatar
 
Join Date: Aug 2014
Location: West plains missouri
Posts: 63
Talking Re: 65 long bed fleetside!!! I'm baaaccckk!!#fathersdaygiftrebuild

Check out these videos on YouTube....hey that's my dad there with the 350 yeah buddy!!!
Attached Images
 
__________________
You've got to see the potential in this build, at least that's what I keep telling her. Whether she'll ever see it i don't know.
Howell1988 is offline   Reply With Quote
Old 07-18-2017, 01:13 AM   #7
Howell1988
Registered User
 
Howell1988's Avatar
 
Join Date: Aug 2014
Location: West plains missouri
Posts: 63
Smile Re: 65 long bed fleetside!!! I'm baaaccckk!!#fathersdaygiftrebuild

Just for reference if you check out the videos the two short ones are recent first getting the truck. The one of the engine my dad is running was completed nearly two years ago and she has just been sitting waiting for the right opportunity....so I'm looking very forward to putting the engine from my first truck in what I hope is its primary final body...A powerhouse hiding in an old ghost...lol they nicknamed it the Grey ghost but she won't be gray for long I want turquoise faded and the old faded white top brought to her kind of like this...
Attached Images
 
__________________
You've got to see the potential in this build, at least that's what I keep telling her. Whether she'll ever see it i don't know.
Howell1988 is offline   Reply With Quote
Old 07-19-2017, 11:34 PM   #8
Howell1988
Registered User
 
Howell1988's Avatar
 
Join Date: Aug 2014
Location: West plains missouri
Posts: 63
Smile Re: 65 long bed fleetside!!! I'm baaaccckk!!#fathersdaygiftrebuild

Well managed to get her running steady enough to get it from my dad's over to my house and the fuel line definitely needs cleaned from the tank to the fuel pump line is obviously dirty or rusted so so going to be the next thing pulling the fuel line from the tank to the fuel pump so that it's not starving for fuel but tonight I went ahead and took some pictures of the bed and remove the big flat piece of Steel that the previous owner had laying in the bed so I can get measurements on my boards and go ahead and start getting that ready too so here's a few pics and hopefully I'm going to find a set of fenders and I had a set lined up on here but found out I was short money in my bank account so got to wait till next paycheck and going to try to pick up a set of fenders off here again. Thanks for checking out my YouTube videos and my posts hoping this build starts to pick up speed within the next couple weeks
Attached Images
    
__________________
You've got to see the potential in this build, at least that's what I keep telling her. Whether she'll ever see it i don't know.
Howell1988 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:29 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 1997-2013 67-72chevytrucks.com