NY 1972 Blazer Misc parts - Jack hardware, top hold downs, tailgate seal, seat belts, vi

[JimmyFloyd]

Bunch of parts from a 1972 Blazer. prices do NOT include shipping unless noted

1) Jack hold down hardware from behind the driver's seat. Sprint has surface rust but still stretched and did not feel weak. Brackets in the bag. $50

2) Repro Rear seat front hold downs. - SOLD

3) Rear side hold down brackets with 1 latch catch. Could not get the bolt off, so that is up to the buyer. surface rust, but no holes. $65 with only one latch catch

4) Front center top mounts. No screws. Have a couple sets. $50 each.

5) Parchment Sun visors with mount and screws I pulled. Mirror included as it was on it, or I can toss. - SOLD

6) door guides. - SOLD

7) 1972 screw and grommet for door wing window - - SOLD

8) Seat belts from the blazer. Missing Driver's inner. Crack at base of longer. $100

9) Tailgate sides strips with shot rubber. one dent. $50


ADDED Items (See Below Post #11 for picture)

10) partial set of door guides - $30

11) glove box buttons - $10 each - SOLD

12) Hatch bump stop pair - - SOLD

13) Hatch Arm Upper mount. $5, free with $20+ purchase

14) Pair Hatch Latch - - SOLD

15) Radio/dash knobs, 4x4 & 4 speed shift knobs, knob trim rings, shims, single hole plates - SOLD
------ Radio Knobs and Knob - SOLD

16) 1960-1966 suburban rear door latches (I think.) Might be 67-72 - $50

17) Passenger seat hold down original. - $45


If you don't like the price, make am offer here. First "I'll Take It" get it, pending agreement on the final shipping cost. Please don't PM me offers.

UPDATED 4/27.

[JimmyFloyd]

Pictures:

[1rippen6]

May be interested in seat belts, what color, any pictures?

[JimmyFloyd]

More Pictures: Visors

[JimmyFloyd]

More Pictures:

[JimmyFloyd]

Originally Posted by 1rippen6

May be interested in seat belts, what color, any pictures?

Parchment. Just added a picture. I did not try and clean anything up.

[1rippen6]

Originally Posted by JimmyFloyd

Parchment. Just added a picture. I did not try and clean anything up.

Ok, thanks I will pass.

[HARDCORECASH]

I will take the door guides please.

[Wildbore]

Are you will to sell the rear hatch latch by itself?
Posted via Mobile Device

[JimmyFloyd]

Originally Posted by Wildbore

Are you will to sell the rear hatch latch by itself?
Posted via Mobile Device

The one pictures I could not get off. I did find 2 more, so I can split them up, one to make that a set and one extra I could sell to you. Make me an offer on it.

[JimmyFloyd]

ADDED Items

10) partial set of door guides - $30

11) glove box buttons - $10 each

12) Hatch bump stop pair - $45

13) Hatch Arm Upper mount. $5

14) Single Hatch Latch (other goes with #3) - $20 (Wildbore gets first dibs)

15) Radio/dash knobs, 4x4 & 4 speed shift knobs, knob trim rings, shims, single hole plates - Make offer.

16) 1960-1966 suburban rear door latches (I think.) Might be 67-72 - $50

Again. I would consider an offer if you don't think the price is fair.

[HARDCORECASH]

I will take the pair of hatch latches if wildbore doesn't need the pair.... I will also take the bump stops...

[Wildbore]

I’ll give $50 for the pair. Both latch striker and bump stop.
Posted via Mobile Device

[Wildbore]

I take both please. I’ve been looking for the these for a while now.
Posted via Mobile Device

[Wildbore]

Pm 6263152573
Posted via Mobile Device
Posted via Mobile Device
Posted via Mobile Device

[kv63]

Would you consider $12 for the repro rear seat front hold downs shipped to 90713.

I am also interested in the bracket/ mount for the passenger side buckets where the pointed stud fits into it to hold the passenger bucket seat in place. Let me know the total price for both items shipped. Thank you.

[JimmyFloyd]

HARDCORECASH was first for the bump stops.


Willbore has first dibs on the SINGLE latch catch. The picture shows 2, but as noted, one will for with item #3 to make it complete, as Willbore originally asked if I had one. If you want both, I will do both for $40 plus shipping and remove it from #3. Let me know.

[JimmyFloyd]

Originally Posted by kv63

Would you consider $12 for the repro rear seat front hold downs shipped to 90713.

I am also interested in the bracket/ mount for the passenger side buckets where the pointed stud fits into it to hold the passenger bucket seat in place. Let me know the total price for both items shipped. Thank you.

Looks like I forgot to put a price with the passenger seat hold down. I would do $58 shipped for it and the repop hold downs.

[kv63]

Thank you for the reply. I'll pass.

[Wildbore]

I do want them
Posted via Mobile Device

[Wildbore]

I’ll take both latch strickers plus the bump stops
Posted via Mobile Device

[JimmyFloyd]

Originally Posted by Wildbore

I’ll take both latch strickers plus the bump stops
Posted via Mobile Device

The two latch catches are yours for $44 shipped.

HARDCORECASH was the first one to request the bump stops, so he is getting those. If he passes, you are next in line.

[Wildbore]

Great!Thanks! Where should send the cash?

[JimmyFloyd]

Originally Posted by Wildbore

Great!Thanks! Where should send the cash?

PM sent with details.

[CHEVY_DUDE]

Interested in the Sunvisors. What will the total be shipped to 91762? Thanks