Help on Rally wheel size? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Wantavant · 02-06-2018, 10:15 AM

I just picked up an 86 C-10 rcsb and was wondering if the wheels are 15x7 or 15x8? Are there any special markings I can look for, the tire size that came on the truck are 235/70 15......thanks

Jaysonb · 02-06-2018, 10:16 AM

Truck rallys are 8".

Wantavant · 02-06-2018, 10:19 AM

Quote:

Originally Posted by Jaysonb

Truck rallys are 8".

oh, well thats perfect! Thank you for the help!

SCOTI · 02-06-2018, 10:39 AM

It's a used 1986 truck. Just because it might of came w/8" truck ralleys doesn't mean it still has them. People are known to change things around. Post up a pic of the wheels to get a definitive answer.

There are also the less common 7" ralleys as well as 6.5's from vans. Then there are aftermarket sizes too....

**Palf70Step** · 02-06-2018, 10:51 AM

My daughters's 82 came with 7" ralleys from the factory. As mentioned, trucks could be 7 or 8 inch wide, depending on how it was ordered. Van's had the 6.5" ralleys. This is all for the 5 lug ralleys. Far as I know the 4wd (6 lug) ralleys only came in 8 inch wide. As mentioned aftermarket lets you get a few more widths and diameters that what came from the factory. From what I have seen, the non-silverado models tended to have the 7" ralleys. That's just my experience. AS mentioned, who the heck knows if those are original to the truck or not.

Wantavant · 02-06-2018, 11:00 AM

Here's a few pics, can you tell from these what size they are? Don't mind the ugly bed cover....lol

https://www.flickr.com/photos/159340...posted-public/
https://www.flickr.com/photos/159340...posted-public/
https://www.flickr.com/photos/159340...posted-public/

**Palf70Step** · 02-06-2018, 11:04 AM

I would say those are 8" from the depth of the trim ring.

This is what the 7" ones looked like.

Wantavant · 02-06-2018, 11:10 AM

Ok thank you guys! Gonna be dropping the truck soon and wanted to make sure I could fit a 275/60 tire on the rear.

SCOTI · 02-06-2018, 12:33 PM

To be sure, you can always take a wheel off & measure. Measure from the mounting pad to the back edge & then again to the front edge. Add the dimensions together & subtract 1" (~.500" for each bead).

Wantavant · 02-06-2018, 12:36 PM

I was looking all over the wheels last night, i did see an 8 stamped on the outside by the valve stem but not sure if that has anything to do with it.

02-06-2018, 10:15 AM	#1
Wantavant Registered User Join Date: Feb 2016 Location: Sioux city, Iowa Posts: 53	Help on Rally wheel size? I just picked up an 86 C-10 rcsb and was wondering if the wheels are 15x7 or 15x8? Are there any special markings I can look for, the tire size that came on the truck are 235/70 15......thanks

02-06-2018, 10:16 AM	#2
Jaysonb Registered User Join Date: May 2009 Location: Good Thunder Mn. Posts: 955	Re: Help on Rally wheel size? Truck rallys are 8". __________________ 77 k10 winter beater build http://67-72chevytrucks.com/vboard/s...d.php?t=716884 85 GMC short fleet budget build http://67-72chevytrucks.com/vboard/s...d.php?t=714222 80 C10 stepside build http://67-72chevytrucks.com/vboard/s...d.php?t=693848

02-06-2018, 10:39 AM	#4
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,915	Re: Help on Rally wheel size? It's a used 1986 truck. Just because it might of came w/8" truck ralleys doesn't mean it still has them. People are known to change things around. Post up a pic of the wheels to get a definitive answer. There are also the less common 7" ralleys as well as 6.5's from vans. Then there are aftermarket sizes too.... __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

02-06-2018, 10:51 AM	#5
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,670	Re: Help on Rally wheel size? My daughters's 82 came with 7" ralleys from the factory. As mentioned, trucks could be 7 or 8 inch wide, depending on how it was ordered. Van's had the 6.5" ralleys. This is all for the 5 lug ralleys. Far as I know the 4wd (6 lug) ralleys only came in 8 inch wide. As mentioned aftermarket lets you get a few more widths and diameters that what came from the factory. From what I have seen, the non-silverado models tended to have the 7" ralleys. That's just my experience. AS mentioned, who the heck knows if those are original to the truck or not. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

02-06-2018, 11:00 AM	#6
Wantavant Registered User Join Date: Feb 2016 Location: Sioux city, Iowa Posts: 53	Re: Help on Rally wheel size? Here's a few pics, can you tell from these what size they are? Don't mind the ugly bed cover....lol https://www.flickr.com/photos/159340...posted-public/ https://www.flickr.com/photos/159340...posted-public/ https://www.flickr.com/photos/159340...posted-public/

02-06-2018, 11:04 AM	#7
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,670	Re: Help on Rally wheel size? I would say those are 8" from the depth of the trim ring. This is what the 7" ones looked like. Attached Images __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! Last edited by Palf70Step; 02-06-2018 at 11:09 AM.

02-06-2018, 11:10 AM	#8
Wantavant Registered User Join Date: Feb 2016 Location: Sioux city, Iowa Posts: 53	Re: Help on Rally wheel size? Ok thank you guys! Gonna be dropping the truck soon and wanted to make sure I could fit a 275/60 tire on the rear.

02-06-2018, 12:33 PM	#9
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,915	Re: Help on Rally wheel size? To be sure, you can always take a wheel off & measure. Measure from the mounting pad to the back edge & then again to the front edge. Add the dimensions together & subtract 1" (~.500" for each bead). __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

02-06-2018, 12:36 PM	#10
Wantavant Registered User Join Date: Feb 2016 Location: Sioux city, Iowa Posts: 53	Re: Help on Rally wheel size? I was looking all over the wheels last night, i did see an 8 stamped on the outside by the valve stem but not sure if that has anything to do with it.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.