Need help installing PS pulley - The 1947 - Present Chevrolet & GMC Truck Message Board Network

74chevylvr · 08-16-2019, 01:43 AM

I pulled the pulley of the original PS pump, but I am struggling to get the pulley on the new pump. The new pump does not have center hole for me to screw into to press the the pulley on.

The shaft does have threads for me to put a nut on, but not sure how to press it on. Do I use the tool that I used to pull the pulley but in reverse?

**mongocanfly** · 08-16-2019, 05:45 AM

Dont press or hammer the pully..you'll ruin the pump..go to oreillys or one of your local parts stores..they have loan-a-tools...they will have a kit you can borrow that pulls and installs PSP pullys....

TrailerTrash · 08-16-2019, 08:49 AM

I went to advance auto and used their kit. I took the pump and pulley into the store and did it right there on the countertop. That way I didnt have to pay the money just to drive home, use it, and then drive back and return in.

74chevylvr · 08-16-2019, 09:41 AM

I have the kit. The issue is there is no way to thread into the center of the shaft.

74chevylvr · 08-16-2019, 10:12 AM

And this is the post where I go geez, I realized that they sold me the wrong pump which is not a press on

TrailerTrash · 08-16-2019, 10:24 AM

Ohhhhh poop. I had been sold the wrong pump too. It was clocked wrong and the fittings weren't coming out at the right places

08-16-2019, 01:43 AM	#1
74chevylvr Registered User Join Date: Apr 2019 Location: San Diego, CA Posts: 19	Need help installing PS pulley I pulled the pulley of the original PS pump, but I am struggling to get the pulley on the new pump. The new pump does not have center hole for me to screw into to press the the pulley on. The shaft does have threads for me to put a nut on, but not sure how to press it on. Do I use the tool that I used to pull the pulley but in reverse?

08-16-2019, 05:45 AM	#2
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,581	Re: Need help installing PS pulley Dont press or hammer the pully..you'll ruin the pump..go to oreillys or one of your local parts stores..they have loan-a-tools...they will have a kit you can borrow that pulls and installs PSP pullys.... __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

08-16-2019, 08:49 AM	#3
TrailerTrash Registered User Join Date: Jun 2015 Location: PA Posts: 441	Re: Need help installing PS pulley I went to advance auto and used their kit. I took the pump and pulley into the store and did it right there on the countertop. That way I didnt have to pay the money just to drive home, use it, and then drive back and return in. __________________ - When the Reaper makes his deal, trust in your steel - '77 C10 350/350 2/4 drop and a mild street engine

08-16-2019, 09:41 AM	#4
74chevylvr Registered User Join Date: Apr 2019 Location: San Diego, CA Posts: 19	Re: Need help installing PS pulley I have the kit. The issue is there is no way to thread into the center of the shaft.

08-16-2019, 10:12 AM	#5
74chevylvr Registered User Join Date: Apr 2019 Location: San Diego, CA Posts: 19	Re: Need help installing PS pulley And this is the post where I go geez, I realized that they sold me the wrong pump which is not a press on

08-16-2019, 10:24 AM	#6
TrailerTrash Registered User Join Date: Jun 2015 Location: PA Posts: 441	Re: Need help installing PS pulley Ohhhhh poop. I had been sold the wrong pump too. It was clocked wrong and the fittings weren't coming out at the right places __________________ - When the Reaper makes his deal, trust in your steel - '77 C10 350/350 2/4 drop and a mild street engine



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.