GA 70-71 Valve Cover Decal - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**IronCanine** · 08-03-2015, 08:13 PM

Reproduction 8:350 valve cover decal found on some 1970 and 71 trucks. I had these reproduced for my own restoration building off the work of member Steve Hafner.

EDIT 3/27/23: I recently had the chance to get up close and personal with an original (almost completely) intact version of this decal. Since I've got a new build going, I took the opportunity to photograph it and revisit our reproduction. Our first attempt was based off old GM media and off angle pics of barely there survivors. This "Mark II" version is a much more faithful reproduction with regard to font and dimension. It looks like I can't delete the pics below without contacting an administrator. Just know that the pics below are of our first attempts and not the new better version.

Revised (Improved) Version $15 shipped

Thanks,

Brad

**cericd** · 08-03-2015, 09:06 PM

These look really nice. Were these made to withstand the engine compartment environment? As I understand it, these only go on the passenger side (I've seen other threads about this). Also, are the originals a sticker or a silk screened thin piece of metal with an adhesive backing. Akin to a an emblem.

**IronCanine** · 08-03-2015, 09:23 PM

Quote:

Originally Posted by cericd

These look really nice. Were these made to withstand the engine compartment environment? As I understand it, these only go on the passenger side (I've seen other threads about this). Also, are the originals a sticker or a silk screened thin piece of metal with an adhesive backing. Akin to a an emblem.

Thanks. They do only go on the passenger side. They are discussed in a few threads here on the site. I am not sure about the construction of the originals, and have never seen one in person myself. My opinion is that they were "stickers" on par with the other decals in the engine compartment at that time. With regard to the heat resistance of these decals, I cannot say with certainty. I had a long conversation about this with the printer during the planning stages and the most heat tolerant stock that matched our design requirements was chosen. I have 180 miles on my Blazer (all in summer in Georgia) since completion and it shows no signs of degradation or release at this point.

**med.bronze** · 08-03-2015, 10:34 PM

I'll take one of the "final" versions. PayPal ok, or do you prefer another method? Thanks- Ryan

**IronCanine** · 08-03-2015, 10:41 PM

Quote:

Originally Posted by med.bronze

I'll take one of the "final" versions. PayPal ok, or do you prefer another method? Thanks- Ryan

PM sent.

**med.bronze** · 08-03-2015, 11:26 PM

Payment sent, thanks again!

**hooverfish** · 08-04-2015, 08:08 AM

I will take one, 'final' version.

**IronCanine** · 08-04-2015, 08:13 AM

Quote:

Originally Posted by hooverfish

I will take one, 'final' version.

PM sent.

48richard · 08-04-2015, 11:18 PM

I'll take one, final version.
Thanks

**D.PASSMORE** · 08-05-2015, 07:47 AM

Ill take 2 final and one beta. could you adjust shipping? Thanks

**IronCanine** · 08-05-2015, 08:27 AM

Quote:

Originally Posted by 48richard

I'll take one, final version.
Thanks

Quote:

Originally Posted by D.PASSMORE

Ill take 2 final and one beta. could you adjust shipping? Thanks

PMs sent.

bpatrol · 08-05-2015, 12:47 PM

if you still have them I will take 2 of the final version.
pm with paypal info
thanks phililp

**IronCanine** · 08-05-2015, 05:09 PM

Quote:

Originally Posted by bpatrol

if you still have them I will take 2 of the final version.
pm with paypal info
thanks phililp

PM sent.

bpatrol · 08-05-2015, 05:52 PM

payment send for a pair of the final versions
thanks
philip

**IronCanine** · 08-05-2015, 05:54 PM

Quote:

Originally Posted by bpatrol

payment send for a pair of the final versions
thanks
philip

Thanks. I'll put them in the mail tomorrow.

**med.bronze** · 08-08-2015, 11:39 AM

Decal arrived this morning. Absolutely beautiful!

**IronCanine** · 08-08-2015, 12:17 PM

Quote:

Originally Posted by med.bronze

Decal arrived this morning. Absolutely beautiful!

Awesome!

**IronCanine** · 08-15-2015, 08:16 PM

3xt.

Steve Hafner · 09-20-2015, 10:12 AM

. . . .

Here's the one on my C-10 . . . about two hundred miles on it too and still there !!!

. . . .

**IronCanine** · 09-20-2015, 10:38 AM

It looks great Steve...like it was made for it

Thanks for the pic.

**craneboy72** · 09-20-2015, 05:32 PM

Do u have any more final version

70LonghornCST · 09-20-2015, 06:15 PM

I'll take a final version if still available.

**IronCanine** · 09-20-2015, 09:24 PM

Quote:

Originally Posted by craneboy72

Do u have any more final version

Yes I do.

Quote:

Originally Posted by 70LonghornCST

I'll take a final version if still available.

PM sent.

**IronCanine** · 09-25-2015, 12:38 PM

Quote:

Originally Posted by craneboy72

Do u have any more final version

PM sent.

factorystock · 09-27-2015, 11:20 PM

Thanks for doing these, I would like to purchase 2 final versions.

08-03-2015, 08:13 PM	#1
IronCanine I'm trying.... Join Date: Oct 2013 Location: Athens, GA Posts: 2,535	70-71 Valve Cover Decal Reproduction 8:350 valve cover decal found on some 1970 and 71 trucks. I had these reproduced for my own restoration building off the work of member Steve Hafner. EDIT 3/27/23: I recently had the chance to get up close and personal with an original (almost completely) intact version of this decal. Since I've got a new build going, I took the opportunity to photograph it and revisit our reproduction. Our first attempt was based off old GM media and off angle pics of barely there survivors. This "Mark II" version is a much more faithful reproduction with regard to font and dimension. It looks like I can't delete the pics below without contacting an administrator. Just know that the pics below are of our first attempts and not the new better version. Revised (Improved) Version $15 shipped Thanks, Brad Attached Images __________________ 1970 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=645076 1969 K10 SWB CST http://67-72chevytrucks.com/vboard/s...52#post8520352 1971 K20 Z84 https://67-72chevytrucks.com/vboard/...90#post9047290 1946 B.F. Avery Model A Tractor http://67-72chevytrucks.com/vboard/s...55#post8292555 "Sometimes I wonder if zander208 was even real..." Last edited by IronCanine; 03-27-2023 at 10:56 AM.

08-03-2015, 09:06 PM	#2
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,088	Re: 70-71 Valve Cover Decal These look really nice. Were these made to withstand the engine compartment environment? As I understand it, these only go on the passenger side (I've seen other threads about this). Also, are the originals a sticker or a silk screened thin piece of metal with an adhesive backing. Akin to a an emblem. __________________ Chris My 1970 SWB C/10 - https://67-72chevytrucks.com/vboard/...d.php?t=534872

08-03-2015, 10:34 PM	#4
med.bronze Senior Member Join Date: Dec 2011 Location: Laurel, Mt. Posts: 522	Re: 70-71 Valve Cover Decal I'll take one of the "final" versions. PayPal ok, or do you prefer another method? Thanks- Ryan __________________ 1972 Cheyenne Super 10 SWB,bucket seats,dealer cruise,tilt,tac,a/c,shoulder belts, 350/350 1971 K-10 Custom Deluxe 1971 K-10 Custom

08-03-2015, 11:26 PM	#6
med.bronze Senior Member Join Date: Dec 2011 Location: Laurel, Mt. Posts: 522	Re: 70-71 Valve Cover Decal Payment sent, thanks again! __________________ 1972 Cheyenne Super 10 SWB,bucket seats,dealer cruise,tilt,tac,a/c,shoulder belts, 350/350 1971 K-10 Custom Deluxe 1971 K-10 Custom

08-04-2015, 08:08 AM	#7
hooverfish Senior Member Join Date: Oct 2012 Location: Lexington, Ky Posts: 2,112	Re: 70-71 Valve Cover Decal I will take one, 'final' version. __________________ Larry 84 Chevy SWB, "Roy", dark blue orig paint, 6 cyl auto, PS, 88,000 miles. 72 Highlander LWB "Olive" med olive over lt yellow, air, 77,000 miles (sold) "It's a sorry man who can't find his wife a good job"

08-04-2015, 11:18 PM	#9
48richard Registered User Join Date: Oct 2009 Location: Phoenix, AZ Posts: 475	Re: 70-71 Valve Cover Decal I'll take one, final version. Thanks __________________ 1971 C10 Longbed, 350/TH350

08-05-2015, 07:47 AM	#10
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,047	Re: 70-71 Valve Cover Decal Ill take 2 final and one beta. could you adjust shipping? Thanks __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

08-05-2015, 12:47 PM	#12
bpatrol Registered User Join Date: Aug 2012 Location: tucson,az Posts: 274	Re: 70-71 Valve Cover Decal if you still have them I will take 2 of the final version. pm with paypal info thanks phililp

08-05-2015, 05:52 PM	#14
bpatrol Registered User Join Date: Aug 2012 Location: tucson,az Posts: 274	Re: 70-71 Valve Cover Decal payment send for a pair of the final versions thanks philip

08-08-2015, 11:39 AM	#16
med.bronze Senior Member Join Date: Dec 2011 Location: Laurel, Mt. Posts: 522	Re: 70-71 Valve Cover Decal Decal arrived this morning. Absolutely beautiful! __________________ 1972 Cheyenne Super 10 SWB,bucket seats,dealer cruise,tilt,tac,a/c,shoulder belts, 350/350 1971 K-10 Custom Deluxe 1971 K-10 Custom

08-15-2015, 08:16 PM	#18
IronCanine I'm trying.... Join Date: Oct 2013 Location: Athens, GA Posts: 2,535	Re: 70-71 Valve Cover Decal 3xt. __________________ 1970 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=645076 1969 K10 SWB CST http://67-72chevytrucks.com/vboard/s...52#post8520352 1971 K20 Z84 https://67-72chevytrucks.com/vboard/...90#post9047290 1946 B.F. Avery Model A Tractor http://67-72chevytrucks.com/vboard/s...55#post8292555 "Sometimes I wonder if zander208 was even real..."

09-20-2015, 10:12 AM	#19
Steve Hafner Registered User Join Date: Sep 2010 Location: Northport, Alabama Posts: 1,353	Re: 70-71 Valve Cover Decal . . . . Here's the one on my C-10 . . . about two hundred miles on it too and still there !!! . . . . Attached Images

09-20-2015, 10:38 AM	#20
IronCanine I'm trying.... Join Date: Oct 2013 Location: Athens, GA Posts: 2,535	Re: 70-71 Valve Cover Decal It looks great Steve...like it was made for it Thanks for the pic. __________________ 1970 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=645076 1969 K10 SWB CST http://67-72chevytrucks.com/vboard/s...52#post8520352 1971 K20 Z84 https://67-72chevytrucks.com/vboard/...90#post9047290 1946 B.F. Avery Model A Tractor http://67-72chevytrucks.com/vboard/s...55#post8292555 "Sometimes I wonder if zander208 was even real..."

09-20-2015, 05:32 PM	#21
craneboy72 Senior Member Join Date: Jun 2015 Location: Acton Ma Posts: 744	Re: 70-71 Valve Cover Decal Do u have any more final version

09-20-2015, 06:15 PM	#22
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: 70-71 Valve Cover Decal I'll take a final version if still available. __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal



Register or Log In To remove these advertisements.

09-27-2015, 11:20 PM	#25
factorystock Registered User Join Date: Feb 2007 Location: west coast Posts: 3,353	Re: 70-71 Valve Cover Decal Thanks for doing these, I would like to purchase 2 final versions.

Register or Log In To remove these advertisements.