Anyone help identify this rearend? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jayfire · 10-17-2016, 11:50 PM

I need to find out what rearend I have under my 53 Chevy panel truck. It does have a 5x5 lug pattern. I was told some kind of Cadillac, but he was unsure. Anyone have any thoughts? I can't get underneath it at the moment to check for any numbers, too muddy!! I hoping its strong enough to pull a small camp trailer with it. Thanks

1project2many · 10-18-2016, 08:00 AM

I wouldn't be surprised if someone else can ID that pretty quickly. I've seen an axle like that but I'll be danged where. It doesn't look like GM to me. A round driveshaft flange wasn't real common in GM land. And most GM drop center axles have a welded on rear "cover." Are the leaf spring pads welded to eyes?

mr48chev · 10-20-2016, 01:19 AM

Mid/late 60's Cadillac I think, That flange was used on a lot of Cads with CV joints in the drive shaft.

Here is a 68 that a Caddy guy rigged up for bags. http://www.modifiedcadillac.org/foru...opic=7905.105

10-17-2016, 11:50 PM	#1
jayfire Registered User Join Date: Apr 2014 Location: Dayton Nevada Posts: 7	Anyone help identify this rearend? I need to find out what rearend I have under my 53 Chevy panel truck. It does have a 5x5 lug pattern. I was told some kind of Cadillac, but he was unsure. Anyone have any thoughts? I can't get underneath it at the moment to check for any numbers, too muddy!! I hoping its strong enough to pull a small camp trailer with it. Thanks

10-18-2016, 08:00 AM	#2
1project2many Registered User Join Date: Mar 2012 Location: Lakes Region NH Posts: 3,152	Re: Anyone help identify this rearend? I wouldn't be surprised if someone else can ID that pretty quickly. I've seen an axle like that but I'll be danged where. It doesn't look like GM to me. A round driveshaft flange wasn't real common in GM land. And most GM drop center axles have a welded on rear "cover." Are the leaf spring pads welded to eyes?

10-20-2016, 01:19 AM	#3
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,261	Re: Anyone help identify this rearend? Mid/late 60's Cadillac I think, That flange was used on a lot of Cads with CV joints in the drive shaft. Here is a 68 that a Caddy guy rigged up for bags. http://www.modifiedcadillac.org/foru...opic=7905.105 __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.