The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Suspension

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-14-2019, 10:02 AM   #1
72=c10
Registered User
 
Join Date: Feb 2018
Location: Mount Union,PA
Posts: 7
air ride question

i have air ride from bcfab on my 70 c10. i need to run 10lbs less air in the right rear than the left to make the truck set level. this is with the truck empty. anyone have any ideas what would cause this?
__________________
72 C10 6.0L 4L80E
72=c10 is offline   Reply With Quote
Old 05-14-2019, 12:53 PM   #2
69gmcc10
Senior Member
 
69gmcc10's Avatar
 
Join Date: May 2011
Location: Missoula, MT
Posts: 927
Re: air ride question

Do you have an aftermarket panhard Rod? If you have a lowered suspension and a factory panhard rod it will pull on the rear suspension making the rear axle not centered under the truck and can also lead to the bed/frame not sitting level.
__________________
69 GMC C10 build thread- http://67-72chevytrucks.com/vboard/s...d.php?t=501676

03 Silverado build thread-http://67-72chevytrucks.com/vboard/s...d.php?t=591582
69gmcc10 is offline   Reply With Quote
Old 05-14-2019, 08:35 PM   #3
72=c10
Registered User
 
Join Date: Feb 2018
Location: Mount Union,PA
Posts: 7
Re: air ride question

I have the long one from cpp
__________________
72 C10 6.0L 4L80E
72=c10 is offline   Reply With Quote
Old 05-15-2019, 03:33 PM   #4
SCOTI
Registered User
 
SCOTI's Avatar
 
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 17,828
Re: air ride question

Quote:
Originally Posted by 72=c10 View Post
I have the long one from cpp
What air-ride set-up from BC Fab? What are the particulars?
What type of air management system?
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides

Building a small, high rpm engine
with the perfect bore, stroke and rod ratio is very impressive...
like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.

Cubic inches is like Indiana Jones with a cheap pistol....
SCOTI is offline   Reply With Quote
Old 05-15-2019, 03:39 PM   #5
72=c10
Registered User
 
Join Date: Feb 2018
Location: Mount Union,PA
Posts: 7
Re: air ride question

Airlift 2600 bags
Avs electric valves
Avs 7 switch control box
480c compressors
__________________
72 C10 6.0L 4L80E
72=c10 is offline   Reply With Quote
Old 05-15-2019, 05:23 PM   #6
SCOTI
Registered User
 
SCOTI's Avatar
 
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 17,828
Re: air ride question

Was the air suspension just installed? Any other service work or suspension mods done prior to the 'air ride' install?
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides

Building a small, high rpm engine
with the perfect bore, stroke and rod ratio is very impressive...
like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.

Cubic inches is like Indiana Jones with a cheap pistol....
SCOTI is offline   Reply With Quote
Old 05-17-2019, 01:53 PM   #7
Backpayne
Senior Member
 
Join Date: Nov 2015
Location: Seligman, MO
Posts: 490
Re: air ride question

Could just be your gauge.
Backpayne is offline   Reply With Quote
Old 05-18-2019, 07:27 PM   #8
koz
Registered User
 
Join Date: Nov 2012
Location: walnut creek
Posts: 1
Re: air ride question

Measure RH with you sitting in the truck
koz is offline   Reply With Quote
Old 06-07-2019, 01:10 PM   #9
JGRNTC10
Registered User
 
Join Date: Aug 2018
Location: BOISE
Posts: 6
Re: air ride question

Is the issue just that the pressures are different. The psi difference wont matter if you achieve the desired outcome..
JGRNTC10 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:02 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com