What did you do with your truck today, Part 3 - Page 83 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

evilokc · 10-10-2018, 10:01 PM

took the wife, boy, and dog out in the truck for a quick ride. the weather is fantastic and everyone had a good time. its a family truck now.

mikebte · 10-10-2018, 10:56 PM

Quote:

Originally Posted by evilokc

took the wife, boy, and dog out in the truck for a quick ride. the weather is fantastic and everyone had a good time. its a family truck now.

Nice, I went out as well. Super nice ride. Alternator fail on the last block home. Kicked out of OD and limped in the garage. Still a nice ride.

Removed the alternator and will get another tomorrow.

MARTINSR · 10-10-2018, 11:03 PM

Got the left rear fender reinforcement made, then weld thru primer applied so it will be ready tomorrow to weld it in.

It's funny, the photo with the left and right reinforcements I removed from the fenders shows how things weren't real precise back then. The reinforcements were identical, but where it was welded to the fender is a whole different story. You can see the arrows where the bolts to the running board go. The cars of today, holy crap, these pieces would be within a 32nd of an inch or better, darn near perfect about every single time.

Today it's a robot likely putting them on, or at the very least some seriously accurate jigs for them to be mounted.
Back then some man feeding his family welded that thing on, so wild when I remove something like that, I have a connection with those men, no kidding.

Brian

MARTINSR · 10-10-2018, 11:34 PM

Wheel cover Wednesday.

I still haven't made up my mind but I think it will be the 54 Belair. And it will be wide whites of course. I would like to have 53 Corvette, but I could put my daughter through college with what they cost! The middle one, 53 Passenger car (second photo) was actually put on a few 53 Corvettes because they didn't have the Corvette ones ready to go.

Brian

mikebte · 10-11-2018, 12:20 AM

Quote:

Originally Posted by MARTINSR

Wheel cover Wednesday.

I still haven't made up my mind but I think it will be the 54 Belair. And it will be wide whites of course. I would like to have 53 Corvette, but I could put my daughter through college with what they cost! The middle one, 53 Passenger car (second photo) was actually put on a few 53 Corvettes because they didn't have the Corvette ones ready to go.

Brian

That's hard, all are very cool in there own way.

MiraclePieCo · 10-11-2018, 02:42 AM

Quote:

Originally Posted by MARTINSR

Wheel cover Wednesday.

I still haven't made up my mind but I think it will be the 54 Belair. And it will be wide whites of course. I would like to have 53 Corvette, but I could put my daughter through college with what they cost! The middle one, 53 Passenger car (second photo) was actually put on a few 53 Corvettes because they didn't have the Corvette ones ready to go.

Brian

I'm a big fan of hubcaps, partly because they're obsolete on today's modern cars. After all your hard work and discipline it's nice to reward yourself with a little dreaming about the future.

Quote:

Originally Posted by evilokc

took the wife, boy, and dog out in the truck for a quick ride. the weather is fantastic and everyone had a good time. its a family truck now.

What fun - I'm jealous!

MiraclePieCo · 10-11-2018, 03:06 AM

I had limited time today, but managed to mount my mirrors on their new homemade brackets just to see how they fit, then install all 12 seat-mounting T-nuts in the pedestal. I learned that a step drill makes clean holes in wood without splintering!

domnata · 10-11-2018, 05:13 AM

Had a little photo shoot with my truck.

DransportGarage · 10-11-2018, 05:24 AM

Quote:

Originally Posted by domnata

Had a little photo shoot with my truck.

You must be freaking out those BMW drivers! Very cool!

mikebte · 10-11-2018, 08:19 AM

Quote:

Originally Posted by domnata

Had a little photo shoot with my truck.

That’s a cool looking truck, even looks lowered a bit in one photo.

MARTINSR · 10-11-2018, 10:01 AM

Cool photos!

Brian

DeeJayNOLA · 10-11-2018, 03:11 PM

Still waiting to cross paths out here in the Burque evilokc.

DeeJayNOLA · 10-11-2018, 03:13 PM

Quote:

Originally Posted by MARTINSR

Wheel cover Wednesday.

I still haven't made up my mind but I think it will be the 54 Belair. And it will be wide whites of course. I would like to have 53 Corvette, but I could put my daughter through college with what they cost! The middle one, 53 Passenger car (second photo) was actually put on a few 53 Corvettes because they didn't have the Corvette ones ready to go.

Brian

I'd go with the red corvette ones if you're going to paint truck red. Otherwise the blue bowtie logo looks great.

MARTINSR · 10-11-2018, 05:36 PM

Quote:

Originally Posted by DeeJayNOLA

I'd go with the red corvette ones if you're going to paint truck red. Otherwise the blue bowtie logo looks great.

The one with the red center medallion isn't a Corvette, it's a 54 Belair. But yes, I think I am going to go with them.

I have also thought of putting knock off pieces like a 54 Corvette had.

I would have to cast them myself out of aluminum but I have thought about that too and having medallions made like the emblems on the first Corvette made in 53 were. They made them, it was ready to go off to the first Motorama show when they found out that they couldn't have the American flag on it because you can't use the American flag in any business logo. If I were to spend the money to have something made, this would be it, that would be so damn cool!

Brian

evilokc · 10-11-2018, 06:08 PM

Quote:

Originally Posted by DeeJayNOLA

Still waiting to cross paths out here in the Burque evilokc.

Its a beautiful time of year to been cruising.

Black_Sheep · 10-11-2018, 10:05 PM

Getting the truck cleaned up a little for the big reveal at our club gathering tomorrow night...

**oldman3** · 10-11-2018, 10:59 PM

Mark, have a great time showing off the ride...Jim

MARTINSR · 10-12-2018, 12:15 AM

Quote:

Originally Posted by Black_Sheep

Getting the truck cleaned up a little for the big reveal at our club gathering tomorrow night...

That sucker is so sweet, perfect height, all the details, just sweet.

I got the reinforcement welded into the left rear fender, holes for running board drilled, done, another part ready for stripping and primer.

Brian

MARTINSR · 10-12-2018, 03:58 PM

Quote:

Originally Posted by MiraclePieCo

I had limited time today, but managed to mount my mirrors on their new homemade brackets just to see how they fit, then install all 12 seat-mounting T-nuts in the pedestal. I learned that a step drill makes clean holes in wood without splintering!

Here's one for you! LOLOL

Brian

DransportGarage · 10-12-2018, 04:35 PM

Quote:

Originally Posted by MARTINSR

Here's one for you! LOLOL

Brian

The sixth finger makes it even creepier! I didn't know those were available when I had my '65 Fairlane...

mikebte · 10-12-2018, 04:55 PM

Completely resolved my no charging issue. Figure's it would be my fault. Missed hooking up a wire under the dash. Also finished my exhaust wrap and sealer. That stuff smokes up a garage if your not carefull.

MARTINSR · 10-13-2018, 12:50 AM

I planning on a five minute (you know at least 15 but I can dream right?) trip out to the garage to weld a crack that was on the passenger fender. And of course I found a bunch more stuff that needed work. One of the things I ended up doing was not something I was even planning on doing. I have always disliked how the wheel well on these trucks isn't smooth round, they have that flat area where the inner brace bolts to the fender at the edge. You can see the left fender has a squared area, so tonight on the right fender I worked the metal and rounded it. Soooo, the right fender metal work is all done awaiting to be stripped of paint. I just saw that the photo of the left fender is out of focus, sorry.

Brian

mikebte · 10-13-2018, 10:32 AM

Quote:

Originally Posted by MARTINSR

I planning on a five minute (you know at least 15 but I can dream right?) trip out to the garage to weld a crack that was on the passenger fender. And of course I found a bunch more stuff that needed work. One of the things I ended up doing was not something I was even planning on doing. I have always disliked how the wheel well on these trucks isn't smooth round, they have that flat area where the inner brace bolts to the fender at the edge. You can see the left fender has a squared area, so tonight on the right fender I worked the metal and rounded it. Soooo, the right fender metal work is all done awaiting to be stripped of paint. I just saw that the photo of the left fender is out of focus, sorry.

Brian

Nice, interesting how they have a flat spot on the fender. I never paid any attention to that detail.

Black_Sheep · 10-13-2018, 11:34 AM

I drove the truck 25 miles in rush hour traffic to a little shindig last night. Other than a couple short shakedown cruises, this was the first time the truck has been publicly displayed. People seemed genuinely interested in the '58 and a promotor for Minnesota's longest running annual indoor car show asked me to enter it in their show. All in all it was a really fun night.

Driving home in the dark reminded me, I still have to aim the headlights ...

MARTINSR · 10-13-2018, 11:47 AM

Very cool! Heck yeah it deserves being in a show it looks awesome!

I had a VERY interesting request of my Rambler yesterday. On my way home I had some youngsters in a BMW ask me if I would rent it to them for a music video! I thought about it for a millisecond......no.

Brian

10-10-2018, 10:01 PM	#2051
evilokc Registered User Join Date: Mar 2013 Location: albuquerque New Mexico Posts: 522	Re: What did you do with your truck today, Part 3 took the wife, boy, and dog out in the truck for a quick ride. the weather is fantastic and everyone had a good time. its a family truck now.

10-10-2018, 11:03 PM	#2053
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,001	Re: What did you do with your truck today, Part 3 Got the left rear fender reinforcement made, then weld thru primer applied so it will be ready tomorrow to weld it in. It's funny, the photo with the left and right reinforcements I removed from the fenders shows how things weren't real precise back then. The reinforcements were identical, but where it was welded to the fender is a whole different story. You can see the arrows where the bolts to the running board go. The cars of today, holy crap, these pieces would be within a 32nd of an inch or better, darn near perfect about every single time. Today it's a robot likely putting them on, or at the very least some seriously accurate jigs for them to be mounted. Back then some man feeding his family welded that thing on, so wild when I remove something like that, I have a connection with those men, no kidding. Brian Attached Images __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"

10-10-2018, 11:34 PM	#2054
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,001	Re: What did you do with your truck today, Part 3 Wheel cover Wednesday. I still haven't made up my mind but I think it will be the 54 Belair. And it will be wide whites of course. I would like to have 53 Corvette, but I could put my daughter through college with what they cost! The middle one, 53 Passenger car (second photo) was actually put on a few 53 Corvettes because they didn't have the Corvette ones ready to go. Brian Attached Images __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"

10-11-2018, 03:06 AM	#2057
MiraclePieCo Registered User Join Date: Sep 2014 Location: USA Posts: 2,249	Re: What did you do with your truck today, Part 3 I had limited time today, but managed to mount my mirrors on their new homemade brackets just to see how they fit, then install all 12 seat-mounting T-nuts in the pedestal. I learned that a step drill makes clean holes in wood without splintering! Attached Images __________________ 1951 Chevy Panel Truck

10-11-2018, 05:13 AM	#2058
domnata Registered User Join Date: Sep 2016 Location: St. Ingbert/Germany Posts: 8	Re: What did you do with your truck today, Part 3 Had a little photo shoot with my truck. Attached Images __________________ I know it's cool but no i will not paint it!!!

10-11-2018, 10:01 AM	#2061
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,001	Re: What did you do with your truck today, Part 3 Cool photos! Brian __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"

10-11-2018, 03:11 PM	#2062
DeeJayNOLA Registered User Join Date: Feb 2015 Location: ABQ & MSY Posts: 69	Re: What did you do with your truck today, Part 3 Still waiting to cross paths out here in the Burque evilokc. __________________ Representing for the 504. Last edited by DeeJayNOLA; 10-11-2018 at 03:14 PM. Reason: forgot to mention who I was directing this to.

10-11-2018, 10:05 PM	#2066
Black_Sheep Registered User Join Date: Jun 2017 Location: upper midwest Posts: 1,129	Re: What did you do with your truck today, Part 3 Getting the truck cleaned up a little for the big reveal at our club gathering tomorrow night... Attached Images __________________ Mark Brother's keeper - '58 Stepside build

10-11-2018, 10:59 PM	#2067
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,553	Re: What did you do with your truck today, Part 3 Mark, have a great time showing off the ride...Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

10-12-2018, 04:55 PM	#2071
mikebte Registered User Join Date: Oct 2011 Location: Tucson, AZ Posts: 639	Re: What did you do with your truck today, Part 3 Completely resolved my no charging issue. Figure's it would be my fault. Missed hooking up a wire under the dash. Also finished my exhaust wrap and sealer. That stuff smokes up a garage if your not carefull. Attached Images __________________ 1959 Chevy Apache 3100/ 283 TBI / 4L60E My YouTube: https://www.youtube.com/mikebtte

10-13-2018, 12:50 AM	#2072
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,001	Re: What did you do with your truck today, Part 3 I planning on a five minute (you know at least 15 but I can dream right?) trip out to the garage to weld a crack that was on the passenger fender. And of course I found a bunch more stuff that needed work. One of the things I ended up doing was not something I was even planning on doing. I have always disliked how the wheel well on these trucks isn't smooth round, they have that flat area where the inner brace bolts to the fender at the edge. You can see the left fender has a squared area, so tonight on the right fender I worked the metal and rounded it. Soooo, the right fender metal work is all done awaiting to be stripped of paint. I just saw that the photo of the left fender is out of focus, sorry. Brian Attached Images __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"

10-13-2018, 11:34 AM	#2074
Black_Sheep Registered User Join Date: Jun 2017 Location: upper midwest Posts: 1,129	Re: What did you do with your truck today, Part 3 I drove the truck 25 miles in rush hour traffic to a little shindig last night. Other than a couple short shakedown cruises, this was the first time the truck has been publicly displayed. People seemed genuinely interested in the '58 and a promotor for Minnesota's longest running annual indoor car show asked me to enter it in their show. All in all it was a really fun night. Driving home in the dark reminded me, I still have to aim the headlights ... Attached Images __________________ Mark Brother's keeper - '58 Stepside build

10-13-2018, 11:47 AM	#2075
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,001	Re: What did you do with your truck today, Part 3 Very cool! Heck yeah it deserves being in a show it looks awesome! I had a VERY interesting request of my Rambler yesterday. On my way home I had some youngsters in a BMW ask me if I would rent it to them for a music video! I thought about it for a millisecond......no. Brian __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.