Project Dead Rat - COOP Pickup - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

aknovaman · 08-10-2015, 11:10 PM

aknovaman · 09-12-2015, 04:20 PM

A bit of progress today. Ebay $300 CUT50-F plasma cutter is my friend. It works like a champ on old stuff I wont be needing.

Frame height at crossmember spindle centerline is 12.5 inches.

1996 Imp SS wheel for fitment and ride height. front tires 245 50 17 . rear 275 60 17.
Front will be Mustang 2 and rear will be TCi leaf kit with lowering blocks.

**joedoh** · 09-12-2015, 06:47 PM

is that the one you got in valley center?

looks like a great start, amazing what a plasma cutter does for all that grunt work that used to be a pain grinding and cutting.

aknovaman · 09-12-2015, 06:51 PM

Actually the coop is a 1951. This is a 1949. Coop waits till this is driveable. This is a one owner from Burlingame, ks. Hoping we can keep it low with the TCI rear leaf kit.

aknovaman · 09-12-2015, 07:42 PM

https://www.youtube.com/watch?v=43T0kSYvBlk

99 to Life · 09-12-2015, 09:18 PM

looks good

KcLevi · 11-27-2015, 10:11 PM

Truck done yet?

aknovaman · 11-27-2015, 11:18 PM

Ha ha ha. Between a full time job, 3 kids and harness and tuning work, and a wife, I get little time to work it. As of tonight it's still outside and covered with 1/2 inch of ice and snow. Motor mounts are next.

armyrat23 · 11-28-2017, 09:14 PM

AKnovaman what happen to your YouTube channel?

08-10-2015, 11:10 PM	#26
aknovaman Registered User Join Date: Aug 2013 Location: Tecumseh Posts: 355	Re: Project Dead Rat - COOP Pickup __________________ Current project 1959 Willys = GEZR TRUK Geezer is a Latin compound word made up of two roots. Gee meaning Urine Stain and Zer meaning your pants are open! FMCDH GBU and GBA http://www.youtube.com/user/aknovaman/videos

09-12-2015, 04:20 PM	#27
aknovaman Registered User Join Date: Aug 2013 Location: Tecumseh Posts: 355	Re: Project Dead Rat - COOP Pickup A bit of progress today. Ebay $300 CUT50-F plasma cutter is my friend. It works like a champ on old stuff I wont be needing. Frame height at crossmember spindle centerline is 12.5 inches. 1996 Imp SS wheel for fitment and ride height. front tires 245 50 17 . rear 275 60 17. Front will be Mustang 2 and rear will be TCi leaf kit with lowering blocks. __________________ Current project 1959 Willys = GEZR TRUK Geezer is a Latin compound word made up of two roots. Gee meaning Urine Stain and Zer meaning your pants are open! FMCDH GBU and GBA http://www.youtube.com/user/aknovaman/videos

09-12-2015, 06:47 PM	#28
joedoh Senior Member Join Date: May 2007 Location: Doodah Kansas Posts: 7,747	Re: Project Dead Rat - COOP Pickup is that the one you got in valley center? looks like a great start, amazing what a plasma cutter does for all that grunt work that used to be a pain grinding and cutting. __________________ the mass of men live lives of quiet desperation if there is a problem, I can have it. new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393

09-12-2015, 06:51 PM	#29
aknovaman Registered User Join Date: Aug 2013 Location: Tecumseh Posts: 355	Re: Project Dead Rat - COOP Pickup Actually the coop is a 1951. This is a 1949. Coop waits till this is driveable. This is a one owner from Burlingame, ks. Hoping we can keep it low with the TCI rear leaf kit. __________________ Current project 1959 Willys = GEZR TRUK Geezer is a Latin compound word made up of two roots. Gee meaning Urine Stain and Zer meaning your pants are open! FMCDH GBU and GBA http://www.youtube.com/user/aknovaman/videos

09-12-2015, 07:42 PM	#30
aknovaman Registered User Join Date: Aug 2013 Location: Tecumseh Posts: 355	Re: Project Dead Rat - COOP Pickup https://www.youtube.com/watch?v=43T0kSYvBlk __________________ Current project 1959 Willys = GEZR TRUK Geezer is a Latin compound word made up of two roots. Gee meaning Urine Stain and Zer meaning your pants are open! FMCDH GBU and GBA http://www.youtube.com/user/aknovaman/videos

09-12-2015, 09:18 PM	#31
99 to Life Registered User Join Date: Jan 2010 Location: Titusville, PA Posts: 3,585	Re: Project Dead Rat - COOP Pickup looks good __________________ 51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com

11-27-2015, 10:11 PM	#32
KcLevi Registered User Join Date: Jan 2009 Location: Kansas City ks Posts: 87	Re: Project Dead Rat - COOP Pickup Truck done yet? __________________ 1970 C-10. Black on outside Blue on the inside. Will be at least a 4-6 drop ASAP.

11-27-2015, 11:18 PM	#33
aknovaman Registered User Join Date: Aug 2013 Location: Tecumseh Posts: 355	Re: Project Dead Rat - COOP Pickup Ha ha ha. Between a full time job, 3 kids and harness and tuning work, and a wife, I get little time to work it. As of tonight it's still outside and covered with 1/2 inch of ice and snow. Motor mounts are next. __________________ Current project 1959 Willys = GEZR TRUK Geezer is a Latin compound word made up of two roots. Gee meaning Urine Stain and Zer meaning your pants are open! FMCDH GBU and GBA http://www.youtube.com/user/aknovaman/videos

11-28-2017, 09:14 PM	#34
armyrat23 Registered User Join Date: Aug 2009 Location: centerville Tennessee Posts: 1	Re: Project Dead Rat - COOP Pickup AKnovaman what happen to your YouTube channel?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.