MN 3 rows of 72 burb seats - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**too much stuff** · 01-04-2018, 12:15 AM

Just picked up a 72 parts burb and it came with 3 rows of seats I am probably not going to use. They will need work. $600 and can be dropped off between Mn and northern texas in feb. Will get pics this weekend if there is genuine interest.

**67 cst swb** · 01-04-2018, 12:23 AM

Hmmmmm... Interesting find. waiting to see pictures.

**too much stuff** · 01-06-2018, 11:41 PM

Will dig them out of the burb if there is serious interest.

**dozerbill72** · 01-07-2018, 12:51 PM

Whats the plan for the rest of it?

**Getter-Done** · 01-07-2018, 01:47 PM

Do you plan on selling other parts?

402GMC · 01-07-2018, 02:09 PM

How about the third row seat belts

waylonbud · 01-07-2018, 04:28 PM

Hello, If you decide to sell any other parts, I am interested in the third door, door locking linkage with retaining clips.
Thanks

Bones72Super · 01-07-2018, 05:01 PM

Do you happen to have the front clip for this. My suburban got wrecked and I have been looking for an original paint front end for a long time. I may also be interested in the front doors

**too much stuff** · 01-07-2018, 09:49 PM

Quote:

Originally Posted by dozerbill72

Whats the plan for the rest of it?

I need some parts for my 72, but may sell some things

Quote:

Originally Posted by Getter-Done

Do you plan on selling other parts?

see reply above.

Quote:

Originally Posted by 402GMC

How about the third row seat belts

Not sure what is there.

Quote:

Originally Posted by waylonbud

Hello, If you decide to sell any other parts, I am interested in the third door, door locking linkage with retaining clips.
Thanks

I know I need some of the 3rd door innards for my burb. Would need to check it out.

Quote:

Originally Posted by Bones72Super

Do you happen to have the front clip for this. My suburban got wrecked and I have been looking for an original paint front end for a long time. I may also be interested in the front doors

Pics of the hood and fender. I know there was a little rust on the back edge of the fender when I loaded it.

Bones72Super · 01-07-2018, 10:18 PM

Do you have the driverside fender as well?

zkeck · 01-07-2018, 10:20 PM

I’ll take the 3rd row rear seat, front tube brackets if you have? They should be about 4.5” tall vs. the set you have pictured in the 2nd row(too tall for blazer rear seat)

I have a set of the 2nd row suburban floor tube brackets...

Thanks!
QUOTE=too much stuff;8154730]I need some parts for my 72, but may sell some things

see reply above.

Not sure what is there.

I know I need some of the 3rd door innards for my burb. Would need to check it out.

Pics of the hood and fender. I know there was a little rust on the back edge of the fender when I loaded it.[/QUOTE]
Posted via Mobile Device

**too much stuff** · 01-07-2018, 11:05 PM

Quote:

Originally Posted by Bones72Super

Do you have the driverside fender as well?

It Is buried inside there, but don't recall the condition.

Quote:

Originally Posted by zkeck

I’ll take the 3rd row rear seat, front tube brackets if you have? They should be about 4.5” tall vs. the set you have pictured in the 2nd row(too tall for blazer rear seat)

I have a set of the 2nd row suburban floor tube brackets...

Thanks!

Posted via Mobile Device[/QUOTE]
Keeping all of the seat stuff together right now.

**Hart_Rod** · 01-08-2018, 12:46 PM

Are the plastic roof bows any good?

**67 cst swb** · 01-08-2018, 10:42 PM

Quote:

Originally Posted by too much stuff

Will dig them out of the burb if there is serious interest.

I am interested, but no hurry on my part. You are only in Minnesota so you are rather close.

Thanks

**too much stuff** · 01-08-2018, 11:18 PM

Quote:

Originally Posted by Bones72Super

Do you have the driverside fender as well?

Pics added, hood is pretty decent, fenders have rust.

Quote:

Originally Posted by Hart_Rod

Are the plastic roof bows any good?

I may need those yet, not sure

Quote:

Originally Posted by 67 cst swb

I am interested, but no hurry on my part. You are only in Minnesota so you are rather close.

Thanks

Let me know if you want me to dig them out. I went through some of the parts today.

Bones72Super · 01-09-2018, 01:01 AM

Thank you very much for the pictures. I'm gonna pass on the sheet metal. Is the rolling chassis available?

402GMC · 01-09-2018, 11:34 AM

any luck on the third row seat belts?

**too much stuff** · 01-14-2018, 12:28 AM

Quote:

Originally Posted by Bones72Super

Thank you very much for the pictures. I'm gonna pass on the sheet metal. Is the rolling chassis available?

Not rolling, I need the axles for a different project.

Quote:

Originally Posted by 402GMC

any luck on the third row seat belts?

Haven't had a chance to look.

**too much stuff** · 01-17-2018, 04:06 PM

Quote:

Originally Posted by 402GMC

any luck on the third row seat belts?

Rough shape.

Quote:

Originally Posted by 67 cst swb

I am interested, but no hurry on my part. You are only in Minnesota so you are rather close.

Thanks

Pics for those intersted

Rear seat is 50", middle is 60". Seats match so I am not sure what is correct here.

Heliarcn · 01-17-2018, 05:29 PM

Are the mirrors available?

**67 cst swb** · 01-22-2018, 08:49 PM

Quote:

Originally Posted by too much stuff

Rough shape.

Pics for those intersted

Rear seat is 50", middle is 60". Seats match so I am not sure what is correct here.

It appears that the 2nd row seat is full width? Is that correct?
Are you firm on that price?

**too much stuff** · 01-23-2018, 12:21 AM

Quote:

Originally Posted by 67 cst swb

It appears that the 2nd row seat is full width? Is that correct?
Are you firm on that price?

That was why I posted the dimensions and the spid, I am not sure what is correct here.
Shoot me an offer and make a road trip...

KevDiesel · 01-23-2018, 12:42 PM

How much for the driver and passenger mirrors including mounting hardware?

**richard2717** · 01-23-2018, 03:15 PM

Too much stuff,
I think someone added the 3rd seat at some point. If it was originally 3 row seating the 2nd & 3rd row would be same width seats and the spid would list it that way (at least on my 72 it does) pic of my spid attached.

Richard

.

**too much stuff** · 01-23-2018, 05:32 PM

Quote:

Originally Posted by richard2717

Too much stuff,
I think someone added the 3rd seat at some point. If it was originally 3 row seating the 2nd & 3rd row would be same width seats and the spid would list it that way (at least on my 72 it does) pic of my spid attached.

Richard

.

Thanks for the info.
So I would guess someone may have gotten lucky to find the matching seat to these? Since mine only lists rear seat, does that mean it would be the blazer seat at the back and no center seat?

01-04-2018, 12:15 AM	#1
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,693	3 rows of 72 burb seats Just picked up a 72 parts burb and it came with 3 rows of seats I am probably not going to use. They will need work. $600 and can be dropped off between Mn and northern texas in feb. Will get pics this weekend if there is genuine interest. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-04-2018, 12:23 AM	#2
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: 3 rows of 72 burb seats Hmmmmm... Interesting find. waiting to see pictures. __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White 2002 Chevrolet 1500HD 4x4 Crew Cab 6.0L 4L80E Red

01-06-2018, 11:41 PM	#3
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,693	Re: 3 rows of 72 burb seats Will dig them out of the burb if there is serious interest. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-07-2018, 12:51 PM	#4
dozerbill72 Senior Member Join Date: Oct 2015 Location: Berryville Arkansas Posts: 402	Re: 3 rows of 72 burb seats Whats the plan for the rest of it?

01-07-2018, 01:47 PM	#5
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 7,724	Re: 3 rows of 72 burb seats Do you plan on selling other parts?

01-07-2018, 02:09 PM	#6
402GMC Registered User Join Date: May 2008 Location: RAPID CITY, SOUTH DAKOTA Posts: 404	Re: 3 rows of 72 burb seats How about the third row seat belts

01-07-2018, 04:28 PM	#7
waylonbud Registered User Join Date: Dec 2011 Location: Athens,TN Posts: 302	Re: 3 rows of 72 burb seats Hello, If you decide to sell any other parts, I am interested in the third door, door locking linkage with retaining clips. Thanks

01-07-2018, 05:01 PM	#8
Bones72Super Registered User Join Date: Sep 2017 Location: Lake Travis,Texas Posts: 769	Re: 3 rows of 72 burb seats Do you happen to have the front clip for this. My suburban got wrecked and I have been looking for an original paint front end for a long time. I may also be interested in the front doors Attached Images Last edited by Bones72Super; 01-07-2018 at 05:09 PM.

01-07-2018, 10:18 PM	#10
Bones72Super Registered User Join Date: Sep 2017 Location: Lake Travis,Texas Posts: 769	Re: 3 rows of 72 burb seats Do you have the driverside fender as well?

01-07-2018, 10:20 PM	#11
zkeck Registered User Join Date: Feb 2016 Location: Bothell, WA Posts: 5	I’ll take the 3rd row rear seat, front tube brackets if you have? They should be about 4.5” tall vs. the set you have pictured in the 2nd row(too tall for blazer rear seat) I have a set of the 2nd row suburban floor tube brackets... Thanks! QUOTE=too much stuff;8154730]I need some parts for my 72, but may sell some things see reply above. Not sure what is there. I know I need some of the 3rd door innards for my burb. Would need to check it out. Pics of the hood and fender. I know there was a little rust on the back edge of the fender when I loaded it.[/QUOTE] Posted via Mobile Device

01-08-2018, 12:46 PM	#13
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,827	Re: 3 rows of 72 burb seats Are the plastic roof bows any good? __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

01-09-2018, 01:01 AM	#16
Bones72Super Registered User Join Date: Sep 2017 Location: Lake Travis,Texas Posts: 769	Re: 3 rows of 72 burb seats Thank you very much for the pictures. I'm gonna pass on the sheet metal. Is the rolling chassis available?

01-09-2018, 11:34 AM	#17
402GMC Registered User Join Date: May 2008 Location: RAPID CITY, SOUTH DAKOTA Posts: 404	Re: 3 rows of 72 burb seats any luck on the third row seat belts?

01-17-2018, 05:29 PM	#20
Heliarcn Registered User Join Date: Nov 2013 Location: Las Vegas, Nevada Posts: 376	Re: 3 rows of 72 burb seats Are the mirrors available? __________________ Bret 1972 Chevy Suburban 1976 Blazer

01-23-2018, 12:42 PM	#23
KevDiesel Registered User Join Date: May 2016 Location: SF Bay Area, California Posts: 15	Re: 3 rows of 72 burb seats How much for the driver and passenger mirrors including mounting hardware?



Register or Log In To remove these advertisements.

01-23-2018, 03:15 PM	#24
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,884	Re: 3 rows of 72 burb seats Too much stuff, I think someone added the 3rd seat at some point. If it was originally 3 row seating the 2nd & 3rd row would be same width seats and the spid would list it that way (at least on my 72 it does) pic of my spid attached. Richard . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

Register or Log In To remove these advertisements.