The 1947 - Present Chevrolet & GMC Truck Message Board Network

Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain


Thread Tools Display Modes
Old 02-07-2018, 01:28 PM   #1
Registered User
taclem's Avatar
Join Date: Aug 2009
Location: Preston, ID
Posts: 120

Will the flywheel from a 292 fit a 350, and can I use the starter from the six, it looks like it mounts to the bell housing, on the 350.
taclem is offline   Reply With Quote
Old 02-07-2018, 09:13 PM   #2
Mike C
Registered User
Mike C's Avatar
Join Date: Dec 1999
Location: Austin, TX, USA
Posts: 6,882
Re: Flywheel

I would guess a 292 is internal balance and uses a zero balance flywheel like the other contemporary Chevy motors. So most likely you can use the flywheel. Probably true with the starter as well but you should test fit because it can make a difference on the diameter of the flywheel which dictates how many teeth are on the starter ring gear.
44 Willys MB
52 M38A1
64 Corvette Coupe
68 Camaro 'vert LT1 & TH700
69 Z/28 355 12.6's @110
69 Chevy Short Step 4 1/2"/7" drop
72 Jimmy 4WD 4spd 4" & 35's
02 GMC 2500HD 4x4 Duramax
Mike C is online now   Reply With Quote
Old 02-08-2018, 12:11 AM   #3
60-66 Nut

Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 21,706
Re: Flywheel

Yes the 292 flywheel will bolt up to a '68-'85 350. However I believe with 292 flywheel is drilled to accept 1/2" bolts instead of the typical 7/16" bolts used on most other I6 and GEN I small blocks. Yes you can use the same bellhousing mounted starter.
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -4. The time now is 09:37 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.
Copyright 1997-2013