|
06-10-2008, 03:30 PM
|
#1 |
|
Registered User
 
Join Date: Jul 2007
Location: Ottawa Ontario Canada
Posts: 1,156
|
A couple of questions
Looking to swap wheels and tires. The plan is a 10 inch wide with a P315/60R15 M/T drag radials. This tire is roughly 30" tall, and the sidewall is about 13". I have a 1980 Stepside. I know a 10" rim fits, and I think there is more than enough room for the tire. Question is the rims I like only come with a 4 or 4.5" backspacing - anyone know if this should work? Aldo I would like to buy a nice Moroso aluminum pan for the 468 - I guess any pan with a rear sump is OK to use?
|
|
|
|
06-10-2008, 08:48 PM
|
#2 |
|
Hay Team!!
Join Date: Jun 2003
Location: Ft. Worth, TX, USA
Posts: 366
|
Re: A couple of questions
4.5 backspace.....no clearance issues......same tire you want.....10 inch rim
 
__________________
1972 Chevrolet Cheyenne LWB "Orange and White" 8) |
|
|
|
|
06-12-2008, 10:33 AM
|
#3 |
|
Registered User
Join Date: Jul 2007
Location: Ottawa Ontario Canada
Posts: 1,156
|
Re: A couple of questions
Wicked! Thanks!
|
|
|
|
|
06-13-2008, 06:16 AM
|
#4 |
|
Registered User
Join Date: Jul 2007
Location: Pittsburgh, PA
Posts: 294
|
Re: A couple of questions
Think I need to get out tools...ha!!!! Pro Street with narrowed 9" F**d on the way.... Working on making a deal for a rear housing that has alreay been done 52 1/4" axle to axle ..... looks like it will work. Includes Summers axles alreay drilled for 5 x 5" Chevy bolt pattern.
This MUST be meant be... ever since we decided to go this route we have been fortunate enough to find "deals" for the parts/wheels/tires we are going to need. Parts-a-Rama at Butler Fairgrounds in Prospect, PA starting today (Friday am) thru Sunday.... one of the areas LARGEST auto swap meets.....
__________________
John aka "Milner" PA-IndianRider - Pittsburgh, PA 70 Chevy C10 Stepside "Gasser/Altered Drag Race Hot Rod" Where were You in '62 ? |
|
|
|
|
07-03-2008, 04:04 PM
|
#5 | |
|
Registered User
Join Date: Jul 2007
Location: Ottawa Ontario Canada
Posts: 1,156
|
Re: A couple of questions
Quote:
What size of front rims are you using (what backspace as well?) |
|
|
|
|
|
07-04-2008, 10:50 PM
|
#6 |
|
Hay Team!!
Join Date: Jun 2003
Location: Ft. Worth, TX, USA
Posts: 366
|
Re: A couple of questions
That's a 3.5 backspace 15x7
__________________
1972 Chevrolet Cheyenne LWB "Orange and White" 8) |
|
|
|
|
07-05-2008, 08:10 AM
|
#7 |
|
Registered User
Join Date: Feb 2001
Location: Wetumpka, Al, U.S.
Posts: 8,891
|
Re: A couple of questions
I have a real nice set of 295/65/15 M/T drag radials I'd take 150 plus the ride. they have about 12 passes on them!
__________________
Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole! |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
