Help with install on Suburban carpet - The 1947 - Present Chevrolet & GMC Truck Message Board Network

5150 · 02-20-2014, 04:58 PM

I have a full set of gray carpet for my burb. I put down the back section because it's pretty easy with no padding at all. What kind of glue or adhesive are you guys using for the passenger section and the wheel wells?

Thanks

vectorit · 02-20-2014, 05:04 PM

I didn't use any adhesives when I put my carpet in.
The seats hold the front area in place, and the chrome strips in the rear area hold that section of carpet in place.

The wheel well and fuel filler bump, those pieces are held in by the side panels.

Regarding the rear area, I added jute padding.
The front areas, I installed Dynamat along with jute padding.

5150 · 02-20-2014, 05:10 PM

Yea, I have dynamat or insulation down all over the floor throughout. I don't have the carpet hold down strip where it steps up to the back of the floor.

72MARIO · 02-20-2014, 06:57 PM

The hold down strip for the rear area behind the 2nd row is very similar to a residential transition strip from carpet to vinyl .

vectorit · 02-20-2014, 07:23 PM

Quote:

Originally Posted by 72MARIO

The hold down strip for the rear area behind the 2nd row is very similar to a residential transition strip from carpet to vinyl .

X2 Pretty sure you could get this strip from a flooring place.

5150 · 02-20-2014, 08:21 PM

What did you guys use to get the wheel well carpet to lay down?

72MARIO · 02-21-2014, 08:31 AM

http://67-72chevytrucks.com/vboard/s...d.php?t=616694

here a link that shows the hold down strips

pwdcougar · 02-21-2014, 09:41 AM

The PO of my blue 70 used spray adhesive to put the wheel well carpet right over the rust holes.

Spray or even brush on contact cement would work well I would think.

Paul

02-20-2014, 04:58 PM	#1
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,278	Help with install on Suburban carpet I have a full set of gray carpet for my burb. I put down the back section because it's pretty easy with no padding at all. What kind of glue or adhesive are you guys using for the passenger section and the wheel wells? Thanks __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

02-20-2014, 05:04 PM	#2
vectorit What? Join Date: Jun 2007 Location: Southern California Posts: 7,617	Re: Help with install on Suburban carpet I didn't use any adhesives when I put my carpet in. The seats hold the front area in place, and the chrome strips in the rear area hold that section of carpet in place. The wheel well and fuel filler bump, those pieces are held in by the side panels. Regarding the rear area, I added jute padding. The front areas, I installed Dynamat along with jute padding. __________________ Chris 1968 K20 Suburban 1972 K10 LWB PU

02-20-2014, 05:10 PM	#3
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,278	Re: Help with install on Suburban carpet Yea, I have dynamat or insulation down all over the floor throughout. I don't have the carpet hold down strip where it steps up to the back of the floor. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

02-20-2014, 06:57 PM	#4
72MARIO Registered User Join Date: Nov 2000 Location: Huntsville Ontario Canada Posts: 4,052	Re: Help with install on Suburban carpet The hold down strip for the rear area behind the 2nd row is very similar to a residential transition strip from carpet to vinyl . __________________ 1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD

02-20-2014, 08:21 PM	#6
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,278	Re: Help with install on Suburban carpet What did you guys use to get the wheel well carpet to lay down? __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

02-21-2014, 08:31 AM	#7
72MARIO Registered User Join Date: Nov 2000 Location: Huntsville Ontario Canada Posts: 4,052	Re: Help with install on Suburban carpet http://67-72chevytrucks.com/vboard/s...d.php?t=616694 here a link that shows the hold down strips __________________ 1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD

02-21-2014, 09:41 AM	#8
pwdcougar Registered User Join Date: Oct 2013 Location: New Jersey Posts: 1,302	Re: Help with install on Suburban carpet The PO of my blue 70 used spray adhesive to put the wheel well carpet right over the rust holes. Spray or even brush on contact cement would work well I would think. Paul __________________ "You know that little thing in your head that keeps you from saying things you shouldn't? Yeah well, I don't have one of those" 1969 Mercury Cougar Standard 4 speed 1969 Mercury Cougar XR7 convertible 1970 4WD Chevrolet Suburban 1997 4WD Chevrolet Silverado Extended Cab Short Bed (purchased new January 1997)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.