Rear sway bar - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DC Thomas · 10-27-2003, 04:07 PM

I purchased a used rear sway bar from a board member for my 69 C-10. I can't figure how to install. Does anyone have a picture or drawing of the proper procedure? The truck has rear coil springs and is a short step side.

sactoC10 · 10-27-2003, 04:36 PM

There are numerous ways, depending on the bar. Probably should give more detals about it...or better yet, a picture.

DC Thomas · 10-27-2003, 08:43 PM

The bar is in the sape of a long D, with flat ends that have holes in them. It came with two bolts about 10 inchese longs that have sleeves, and two U shape brackets that have rubber bushings inside. I assume the flat ends hang from the long bolts, but there is no place to attach the bar and U brackets. Have any of these attached to the shock mounts? I'll try for a picture.

sactoC10 · 10-29-2003, 11:29 AM

If it looks like this one, check this link.

http://www.classicperform.com/CP7401.html

DC Thomas · 10-29-2003, 10:43 PM

sacto c-10

Thats it!! You got It!! I was trying to install to the rear of the axle. This makes much more sense now! Many thanks.
DC

10-27-2003, 04:07 PM	#1
DC Thomas Registered User Join Date: Jun 2003 Location: central florida Posts: 116	Rear sway bar I purchased a used rear sway bar from a board member for my 69 C-10. I can't figure how to install. Does anyone have a picture or drawing of the proper procedure? The truck has rear coil springs and is a short step side. __________________ D.C.

10-27-2003, 04:36 PM	#2
sactoC10 71 DELUX Join Date: Sep 2003 Location: Northern CA / Sac Posts: 1,056	There are numerous ways, depending on the bar. Probably should give more detals about it...or better yet, a picture. __________________ 5/4 drop LWB wood bed - 15x8 front 235/60 - 15x10 rear 295/50 2003 FORD Escape 1998 Honda VTR1000

10-27-2003, 08:43 PM	#3
DC Thomas Registered User Join Date: Jun 2003 Location: central florida Posts: 116	sway bar The bar is in the sape of a long D, with flat ends that have holes in them. It came with two bolts about 10 inchese longs that have sleeves, and two U shape brackets that have rubber bushings inside. I assume the flat ends hang from the long bolts, but there is no place to attach the bar and U brackets. Have any of these attached to the shock mounts? I'll try for a picture. __________________ D.C.

10-29-2003, 11:29 AM	#4
sactoC10 71 DELUX Join Date: Sep 2003 Location: Northern CA / Sac Posts: 1,056	If it looks like this one, check this link. http://www.classicperform.com/CP7401.html __________________ 5/4 drop LWB wood bed - 15x8 front 235/60 - 15x10 rear 295/50 2003 FORD Escape 1998 Honda VTR1000

10-29-2003, 10:43 PM	#5
DC Thomas Registered User Join Date: Jun 2003 Location: central florida Posts: 116	sway bar sacto c-10 Thats it!! You got It!! I was trying to install to the rear of the axle. This makes much more sense now! Many thanks. DC __________________ D.C.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.