The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 10-10-2017, 07:35 PM   #1
miller6t9
Registered User
 
miller6t9's Avatar
 
Join Date: Aug 2009
Location: Rockingham, nc
Posts: 166
what rotor/caliper do I use with these CPP spindles?

I want to clean up behind these bigger wheels I'm fixin to put on my '72, so I'm thinking about using the Wilwood D52 calipers, hawk pads and whatever rotors will work with these spindles. I cant find the paperwork when I bought them but I think they are the CPP 2.5 drop spindles (not the modular) Am i right? .....and also, I want to be able to use the 15 wheels I have on it now from time to time....so what am I looking for?
Attached Images
 
miller6t9 is offline   Reply With Quote
Old 10-10-2017, 07:37 PM   #2
demian5
Registered User
 
demian5's Avatar
 
Join Date: Aug 2016
Location: Lake Forest, CA
Posts: 1,524
Re: what rotor/caliper do I use with these CPP spindles?

And here my friends is why you want to use a product that uses parts store factory parts.

- I'm sure you can buy them from CPP.
__________________
"Work hard, use your vacation days."
1970 C15 GMC Long Bed
1986 C20 Scottsdale (grandpa truck)
1964 Impala SS
1959 Austin Healey 100-6 BN6
Instagram: C10sofOC
demian5 is offline   Reply With Quote
Old 10-10-2017, 08:04 PM   #3
weq92f
Registered User
 
Join Date: Oct 2016
Location: Dallas Texas
Posts: 1,039
Re: what rotor/caliper do I use with these CPP spindles?

CPP spindles use proprietary rotors/caliper??? My ECC units use standard off the shelf parts for the application they were purchased for.

Shocker!

-klb
__________________
67 C10 fleet fuel injected '70 402, 700r4, 3.73 posi
07 335 sport turbo 6sp
94 Trans Am GT LT1 6sp posi -- sold after 22yrs
99 540 sport V8 6sp -- sold
73 240z L24 4sp -- given to friend
68 C10 step 350/350 3.73 open -- sold
weq92f is offline   Reply With Quote
Old 10-10-2017, 08:10 PM   #4
leddzepp
Moderator

 
leddzepp's Avatar
 
Join Date: May 2007
Location: Southern Cal
Posts: 18,133
Re: what rotor/caliper do I use with these CPP spindles?

Your cpp spindles will use stuff right off the shelf as well
__________________
1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed.

1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck.


RIP ElJay
leddzepp is offline   Reply With Quote
Old 10-10-2017, 08:40 PM   #5
miller6t9
Registered User
 
miller6t9's Avatar
 
Join Date: Aug 2009
Location: Rockingham, nc
Posts: 166
Re: what rotor/caliper do I use with these CPP spindles?

Quote:
Originally Posted by leddzepp View Post
Your cpp spindles will use stuff right off the shelf as well
so its as simple as getting the D52 kit and some 5x5 1.25 inch rotors?
miller6t9 is offline   Reply With Quote
Old 10-10-2017, 08:59 PM   #6
lolife99
Old Member
 
lolife99's Avatar
 
Join Date: Nov 2002
Location: Mid-MO
Posts: 22,415
Re: what rotor/caliper do I use with these CPP spindles?

Quote:
Originally Posted by miller6t9 View Post
so its as simple as getting the D52 kit and some 5x5 1.25 inch rotors?
Yes
71-87 1.25" rotors.
__________________
Keith
Convert to disc brakes.
http://67-72chevytrucks.com/vboard/s...d.php?t=444823
WTB: Radio Delete Plates and clips.
lolife99 is offline   Reply With Quote
Old 10-10-2017, 08:42 PM   #7
AussieinNC
Registered User
 
AussieinNC's Avatar
 
Join Date: Jun 2017
Location: Cherryville, NC
Posts: 709
Re: what rotor/caliper do I use with these CPP spindles?

Careful with these...

CP4S4 fits 1973-87 C-10 2 drop $239/pr

http://www.classicperform.com/NewPro...opSpindles.htm

Ball joints and tie rod ends may have different tapers...

CPP correct part number for 71-72 is

CP4S3 fits 1971-72 C-10 2 drop $239/pr

AussieinNC is offline   Reply With Quote
Old 10-10-2017, 08:49 PM   #8
miller6t9
Registered User
 
miller6t9's Avatar
 
Join Date: Aug 2009
Location: Rockingham, nc
Posts: 166
Re: what rotor/caliper do I use with these CPP spindles?

Quote:
Originally Posted by AussieinNC View Post
Careful with these...

CP4S4 fits 1973-87 C-10 2 drop $239/pr

http://www.classicperform.com/NewPro...opSpindles.htm

Ball joints and tie rod ends may have different tapers...

CPP correct part number for 71-72 is

CP4S3 fits 1971-72 C-10 2 drop $239/pr

I saw that....got curious about it...but they've been on the truck for about 7 years, so who knows.....
miller6t9 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:33 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com