MD Parting 72 burb - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

carryall · 05-28-2018, 12:38 PM

Quote:

Originally Posted by richard2717

Got your payment and will ship tomorrow

Thanks

**richard2717** · 05-28-2018, 12:39 PM

Quote:

Originally Posted by T0ple55

About exactly half should work just fine. Thanks again!

So like from here down? I am in holding pattern here for rain. Soon as it lets up some I will finish removing the fender so I can see it better

.

T0ple55 · 05-28-2018, 11:35 PM

That will be perfect. Let me know how much your thinking

**richard2717** · 05-29-2018, 08:05 PM

Quote:

Originally Posted by T0ple55

That will be perfect. Let me know how much your thinking

Per the pm I sent is this all you are needing (circled in red)?

.

T0ple55 · 05-29-2018, 08:08 PM

Yes, that is exactly it, thanks a ton.

**richard2717** · 05-29-2018, 08:23 PM

Quote:

Originally Posted by T0ple55

Yes, that is exactly it, thanks a ton.

Ok will pull some out in the morning and make sure they are good.

Richard

carryall · 05-29-2018, 08:59 PM

You wouldn't happen to have a radiator support for a 1967, inner fenders, and passenger side fender.

**richard2717** · 05-29-2018, 09:01 PM

Quote:

Originally Posted by carryall

You wouldn't happen to have a radiator support for a 1967, inner fenders, and passenger side fender.

I have a 67 parts truck but the sheet metal is not much to be desired

carryall · 05-29-2018, 09:03 PM

Ok I know the inner fenders can be from any year 67-72. Radiator support must be 67-68.

**richard2717** · 05-29-2018, 09:10 PM

I will take a look at it in the morning and get current pics

**richard2717** · 05-30-2018, 09:06 AM

Quote:

Originally Posted by T0ple55

Yes, that is exactly it, thanks a ton.

Here is pics of what I have. ALready sent pm

.

**richard2717** · 07-02-2018, 12:29 PM

Still have quite a few parts

JMC3178 · 07-02-2018, 01:02 PM

Do you happen to have any rear wheel wells? I'm looking for both driver and passenger sides. Shipped to 93636

**richard2717** · 07-02-2018, 01:22 PM

Quote:

Originally Posted by JMC3178

Do you happen to have any rear wheel wells? I'm looking for both driver and passenger sides. Shipped to 93636

I have 3 sets and all have rust in the flanges.

You might check with

Budnickguy he is in CA
1968k20 Lisa is in CA
t korinek is in AZ
randy500 is in WA

They have Burb parts as well from time to time

Thanks
Richard

Number98 · 07-02-2018, 09:48 PM

Quote:

Originally Posted by richard2717

I have sent the stands off to be rechromed and I have been working on buffing out the rest of the pcs. I am going to wait to see what the stand turn out like before deciding. The other pcs are buffing up really nice. I have a panel truck and 2 blazer projects that I was thinking of using it on one of them, but still up in the air at this point.

Richard

Anymore thought in the rack?

**richard2717** · 07-03-2018, 01:32 PM

Quote:

Originally Posted by Number98

Anymore thought in the rack?

I listed it in a separate post some months back and it was sold.

Thanks
Richard

Burb · 07-17-2018, 05:21 PM

Richard ...

I am looking for a set of Suburban tail light and back up light buckets I did notice you selling a rear panel with some attached and was hoping you my have another set available.

Please let me know

**richard2717** · 07-17-2018, 05:30 PM

Quote:

Originally Posted by Burb

Richard ...

I am looking for a set of Suburban tail light and back up light buckets I did notice you selling a rear panel with some attached and was hoping you my have another set available.

Please let me know

Are you talking about the metal inserts that go into the body panel or the body panel itself? I should have both

.

Burb · 07-17-2018, 05:43 PM

the metal inserts that go into the body panel ...

Burb · 07-17-2018, 05:51 PM

So... how much for sets 6 and 7?

**richard2717** · 07-17-2018, 08:13 PM

Quote:

Originally Posted by Burb

So... how much for sets 6 and 7?

$55 shipped with hardware $50 without
PP link is in my signature below if you want them
I can hit that little bit of surface rust in the blast cabinet b4 I send them out

Thanks
Richard

.

Burb · 07-17-2018, 09:19 PM

Payment sent

Thank you

**richard2717** · 07-17-2018, 09:21 PM

Quote:

Originally Posted by Burb

Payment sent

Thank you

Got it. They will ship tomorrow

Thanks Richard

cucvzuz · 07-26-2018, 09:31 PM

I'm looking for the chrome strip that sits under the driver's side rear quarter glass. Do you still have one

**richard2717** · 07-26-2018, 09:44 PM

Quote:

Originally Posted by cucvzuz

I'm looking for the chrome strip that sits under the driver's side rear quarter glass. Do you still have one

I should still have a couple if you are talking about the one on the inside that holds the interior panels. Will get some pics in the morning and post them

05-28-2018, 11:35 PM	#178
T0ple55 Registered User Join Date: Apr 2014 Location: Arlington Wa Posts: 45	Re: Parting 72 burb That will be perfect. Let me know how much your thinking __________________ 72 GMC Suburban (dads) 69 SWB Chev (frame off father/son) 70 2wd Jimmy+69 4WD Blazer = PHASED 71 SWB stuffed in the barn

05-29-2018, 08:08 PM	#180
T0ple55 Registered User Join Date: Apr 2014 Location: Arlington Wa Posts: 45	Re: Parting 72 burb Yes, that is exactly it, thanks a ton. __________________ 72 GMC Suburban (dads) 69 SWB Chev (frame off father/son) 70 2wd Jimmy+69 4WD Blazer = PHASED 71 SWB stuffed in the barn

05-29-2018, 08:59 PM	#182
carryall Registered User Join Date: Jan 2000 Location: ROMNEY, WV USA Posts: 304	Re: Parting 72 burb You wouldn't happen to have a radiator support for a 1967, inner fenders, and passenger side fender. __________________ 1967 Chevy Truck 1969 Chevy Panel Truck work in progress 1971 GMC 1500 all orginal 1972 Chevy Suburban brought from orignal owner 1984 Dodge Rampage 45,000 original miles 1992 Dodge D150 1994 Buick Roadmaster (LT1 Engine) 2000 Chevy Stepside Z71 2008 Honda Element

05-29-2018, 09:03 PM	#184
carryall Registered User Join Date: Jan 2000 Location: ROMNEY, WV USA Posts: 304	Re: Parting 72 burb Ok I know the inner fenders can be from any year 67-72. Radiator support must be 67-68. __________________ 1967 Chevy Truck 1969 Chevy Panel Truck work in progress 1971 GMC 1500 all orginal 1972 Chevy Suburban brought from orignal owner 1984 Dodge Rampage 45,000 original miles 1992 Dodge D150 1994 Buick Roadmaster (LT1 Engine) 2000 Chevy Stepside Z71 2008 Honda Element

05-29-2018, 09:10 PM	#185
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,867	Re: Parting 72 burb I will take a look at it in the morning and get current pics __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

07-02-2018, 12:29 PM	#187
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,867	Re: Parting 72 burb Still have quite a few parts __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

07-02-2018, 01:02 PM	#188
JMC3178 Registered User Join Date: Aug 2016 Location: Fresno, CA Posts: 6	Re: Parting 72 burb Do you happen to have any rear wheel wells? I'm looking for both driver and passenger sides. Shipped to 93636

07-17-2018, 05:21 PM	#192
Burb Coordinator of Synchronicity Join Date: Dec 2005 Location: West of Houston, TX Posts: 437	Re: Parting 72 burb Richard ... I am looking for a set of Suburban tail light and back up light buckets I did notice you selling a rear panel with some attached and was hoping you my have another set available. Please let me know __________________ Rick 1971 Suburban ... W.I.P. *Build Thread* Customization is ones personal touch-- not what other people think it should be

07-17-2018, 05:43 PM	#194
Burb Coordinator of Synchronicity Join Date: Dec 2005 Location: West of Houston, TX Posts: 437	Re: Parting 72 burb the metal inserts that go into the body panel ... Attached Images __________________ Rick 1971 Suburban ... W.I.P. *Build Thread* Customization is ones personal touch-- not what other people think it should be

07-17-2018, 05:51 PM	#195
Burb Coordinator of Synchronicity Join Date: Dec 2005 Location: West of Houston, TX Posts: 437	Re: Parting 72 burb So... how much for sets 6 and 7? __________________ Rick 1971 Suburban ... W.I.P. *Build Thread* Customization is ones personal touch-- not what other people think it should be

07-17-2018, 09:19 PM	#197
Burb Coordinator of Synchronicity Join Date: Dec 2005 Location: West of Houston, TX Posts: 437	Re: Parting 72 burb Payment sent Thank you __________________ Rick 1971 Suburban ... W.I.P. *Build Thread* Customization is ones personal touch-- not what other people think it should be

07-26-2018, 09:31 PM	#199
cucvzuz Registered User Join Date: Jul 2010 Location: howell mi Posts: 248	Re: Parting 72 burb I'm looking for the chrome strip that sits under the driver's side rear quarter glass. Do you still have one



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.