VA Parting out 62 C30 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Gargoyle · 12-30-2017, 05:22 PM

I'll be parting this truck very soon unless somebody is interested in the complete truck. The truck was last driven on the road in 2011, has not been started in a couple years but should run with some tinkering. Tires, clutch, and exhaust were new in 2010. Now needs a rear brake line and some electrical work. Body is very rusty, doors are in bad shape. Lower fenders are shot , inner fenders rusted out, rust above windshield, bed wood is rotten. 283\4 speed. $1800 as it sits.

Located in Blacksburg, VA

Gargoyle · 12-30-2017, 05:23 PM

more pics.

1960chevypanel · 12-30-2017, 10:03 PM

Dibbs on the grille if you part it. Does it have PS? Any dash pics?

**DPowers** · 12-30-2017, 11:17 PM

Got any better pictures of the engine and also the interior?

Gargoyle · 12-31-2017, 12:19 AM

Does not have PS.

No engine pics yet, here's a few interior pics:

**ScottH** · 12-31-2017, 12:36 AM

would u b willing to cut out a section of the floor? Need a patch panel around the hole the clutch linkage goes thru. I can post a pic if needed. Also interested in the rear view mirror if day/night.

Thanks

**DPowers** · 12-31-2017, 12:43 AM

I would be interested in the instrument cluster, radio delete, lighter delete and possibly some under hood parts pending pics if you part it out. Good luck with the sale.

Gargoyle · 12-31-2017, 12:45 AM

Quote:

Originally Posted by ScottH

would u b willing to cut out a section of the floor? Need a patch panel around the hole the clutch linkage goes thru. I can post a pic if needed. Also interested in the rear view mirror if day/night.

Thanks

If the truck doesn't sell complete I'd cut up the floor. Does not have a day\night mirror.

60short · 12-31-2017, 12:47 AM

id be interested in the hood ordainment and the radio delete plate and windshield wiper retainer nut / knob

Gargoyle · 12-31-2017, 12:50 AM

Quote:

Originally Posted by DPowers

I would be interested in the instrument cluster, radio delete, lighter delete and possibly some under hood parts pending pics if you part it out. Good luck with the sale.

I'll give the whole truck a week or so before I start parting, will keep the situation updated. Thanks!

Gargoyle · 12-31-2017, 12:51 AM

Quote:

Originally Posted by 1960chevypanel

Dibbs on the grille if you part it. Does it have PS? Any dash pics?

You're first in line on the grill, will let you know. Thanks.

62 mark · 12-31-2017, 12:16 PM

Looking for a stock air cleaner, if it's still there...

Gargoyle · 12-31-2017, 01:25 PM

Quote:

Originally Posted by 62 mark

Looking for a stock air cleaner, if it's still there...

Sorry, don't have the stock air cleaner.

Gargoyle · 12-31-2017, 06:39 PM

more pics:

**DPowers** · 12-31-2017, 11:32 PM

Quote:

Originally Posted by DPowers

I would be interested in the instrument cluster, radio delete, lighter delete and possibly some under hood parts pending pics if you part it out. Good luck with the sale.

Interested in heater deletes and washer container as well.

62 Barnfind · 01-01-2018, 11:35 AM

I'm interested in the bell housing.

Gargoyle · 01-04-2018, 01:02 PM

Alright, I'm parting the truck. 62 Barnfind has dibs on the bell housing and horseshoe mount. Everyone else who has posted here will be contacted regarding their requests.
I will be pulling parts this weekend.

I don't have PayPal so payment will be USPS money order, check or cash. All parts are plus shipping. Small stuff will ship typically by USPS, larger stuff by FedEx or Fastenal.

Jeffh · 01-05-2018, 11:14 AM

I would guess that 62Barn is going to need that V8 throttle lever too....

62 Barnfind · 01-06-2018, 10:35 AM

Quote:

Originally Posted by Jeffh

I would guess that 62Barn is going to need that V8 throttle lever too....

Yes I am, Thanks! Gargoyle I sent you a Pm.

Gargoyle · 01-06-2018, 10:41 AM

Six wheels and tires. Tires were new in 2009\2010 and have between 2000-3000 miles on them. Front are radials, rears are bias ply 16.5x75. Front rims and outer rear rims are the later style (drop center?), inner rears are the original style flat base. $300, local pickup is preferred.

Gargoyle · 01-08-2018, 10:23 AM

Quote:

Originally Posted by ScottH

would u b willing to cut out a section of the floor? Need a patch panel around the hole the clutch linkage goes thru. I can post a pic if needed. Also interested in the rear view mirror if day/night.

Thanks

ScottH,
How big of a patch do you need?

Gargoyle · 01-08-2018, 10:25 AM

Quote:

Originally Posted by 1960chevypanel

Dibbs on the grille if you part it. Does it have PS? Any dash pics?

Are you still interested in the grill?

**sirJim** · 01-08-2018, 01:47 PM

Is that a hazzard flasher knob? if so I take it? 20$ plus the ride? Shipping 93291-8103

**southern parts** · 01-08-2018, 05:50 PM

2nd on the grill depending on price. is the engine original to the truck? how much for it complete?

**ScottH** · 01-08-2018, 07:40 PM

I need a good patch that goes from just above the clutch linkage hole to a little below the gas pedal studs. If u need width & length LMK. Also I have a lead on a patch already, so dont cut anything just yet. Wanted to c if u had it incase the other source doesnt work out.

Thanks
Scott

12-30-2017, 05:22 PM	#1
Gargoyle Registered User Join Date: Nov 2013 Location: Blacksburg, VA Posts: 289	Parting out 62 C30 I'll be parting this truck very soon unless somebody is interested in the complete truck. The truck was last driven on the road in 2011, has not been started in a couple years but should run with some tinkering. Tires, clutch, and exhaust were new in 2010. Now needs a rear brake line and some electrical work. Body is very rusty, doors are in bad shape. Lower fenders are shot , inner fenders rusted out, rust above windshield, bed wood is rotten. 283\4 speed. $1800 as it sits. Located in Blacksburg, VA Attached Images

12-30-2017, 05:23 PM	#2
Gargoyle Registered User Join Date: Nov 2013 Location: Blacksburg, VA Posts: 289	Re: Parting out 62 C30 more pics. Attached Images

12-30-2017, 10:03 PM	#3
1960chevypanel Registered User Join Date: Aug 2010 Location: Southern CA Posts: 1,605	Re: Parting out 62 C30 Dibbs on the grille if you part it. Does it have PS? Any dash pics?

12-30-2017, 11:17 PM	#4
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,423	Re: Parting out 62 C30 Got any better pictures of the engine and also the interior? __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

12-31-2017, 12:19 AM	#5
Gargoyle Registered User Join Date: Nov 2013 Location: Blacksburg, VA Posts: 289	Re: Parting out 62 C30 Does not have PS. No engine pics yet, here's a few interior pics: Attached Images

12-31-2017, 12:36 AM	#6
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,183	Re: Parting out 62 C30 would u b willing to cut out a section of the floor? Need a patch panel around the hole the clutch linkage goes thru. I can post a pic if needed. Also interested in the rear view mirror if day/night. Thanks __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon 2008 Corvette convertible

12-31-2017, 12:43 AM	#7
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,423	Re: Parting out 62 C30 I would be interested in the instrument cluster, radio delete, lighter delete and possibly some under hood parts pending pics if you part it out. Good luck with the sale. __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

12-31-2017, 12:47 AM	#9
60short Registered User Join Date: Aug 2017 Location: Santa Barbara, CA Posts: 203	Re: Parting out 62 C30 id be interested in the hood ordainment and the radio delete plate and windshield wiper retainer nut / knob

12-31-2017, 12:16 PM	#12
62 mark Registered User Join Date: Nov 2009 Location: Tampa Fl. Posts: 103	Re: Parting out 62 C30 Looking for a stock air cleaner, if it's still there...

12-31-2017, 06:39 PM	#14
Gargoyle Registered User Join Date: Nov 2013 Location: Blacksburg, VA Posts: 289	Re: Parting out 62 C30 more pics: Attached Images

01-01-2018, 11:35 AM	#16
62 Barnfind Registered User Join Date: Jan 2012 Location: Killeen, Tx Posts: 1,348	Re: Parting out 62 C30 I'm interested in the bell housing. __________________ John Z 1962 Chevy C10 Stepside 62 Barnfind My build tread: http://67-72chevytrucks.com/vboard/s...d.php?t=507513

01-04-2018, 01:02 PM	#17
Gargoyle Registered User Join Date: Nov 2013 Location: Blacksburg, VA Posts: 289	Re: Parting out 62 C30 Alright, I'm parting the truck. 62 Barnfind has dibs on the bell housing and horseshoe mount. Everyone else who has posted here will be contacted regarding their requests. I will be pulling parts this weekend. I don't have PayPal so payment will be USPS money order, check or cash. All parts are plus shipping. Small stuff will ship typically by USPS, larger stuff by FedEx or Fastenal.

01-05-2018, 11:14 AM	#18
Jeffh Registered User Join Date: Sep 2017 Location: Red Oak Iowa Posts: 225	Re: Parting out 62 C30 I would guess that 62Barn is going to need that V8 throttle lever too....

01-06-2018, 10:41 AM	#20
Gargoyle Registered User Join Date: Nov 2013 Location: Blacksburg, VA Posts: 289	Re: Parting out 62 C30 Six wheels and tires. Tires were new in 2009\2010 and have between 2000-3000 miles on them. Front are radials, rears are bias ply 16.5x75. Front rims and outer rear rims are the later style (drop center?), inner rears are the original style flat base. $300, local pickup is preferred.

01-08-2018, 01:47 PM	#23
sirJim Senior Member Join Date: Sep 2016 Location: Denmark Posts: 304	Re: Parting out 62 C30 Is that a hazzard flasher knob? if so I take it? 20$ plus the ride? Shipping 93291-8103 __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=737695 62 burb in the making.



Register or Log In To remove these advertisements.

01-08-2018, 05:50 PM	#24
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,469	Re: Parting out 62 C30 2nd on the grill depending on price. is the engine original to the truck? how much for it complete?

01-08-2018, 07:40 PM	#25
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,183	Re: Parting out 62 C30 I need a good patch that goes from just above the clutch linkage hole to a little below the gas pedal studs. If u need width & length LMK. Also I have a lead on a patch already, so dont cut anything just yet. Wanted to c if u had it incase the other source doesnt work out. Thanks Scott Attached Images __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon 2008 Corvette convertible

Register or Log In To remove these advertisements.