Where to buy 67-72 5/7 kit.

[68shortwide]

Pretty much summed up by title. Lookin to drop the 68 down, was gonna use an ece 4/6 but decided to go lower while its apart. Ece doesn't sell 5/7 kits. Where do I find a quality 5/7 for 60-72? Tia

[michael bustamante]

you might try POL but youll need to c notch if going lower than 6 in the rear

[68shortwide]

It'll be a driver so I already planned for a cnotch even with the 4/6. I'll look at pol

[Sean1985]

I did cpp 3" front springs and cpp spindles. In the back I did all ece with 2" blocks. I also got the shock kit for the front from ece. The blocks I did not buy from ece.

[SoCoC10]

I pieced mine together. 73-87 junkyard lower control arms ,73-87 Car Quest upper/lower ball joints, inner/outer tie rods and adj sleeves,CTS 2.5"spindles $178 off EBay,CCP 2" front and 5" rear springs, shock relocator brackets $260, McNaughty Track bar $99 all from Summit Racing. All 4 KYB GR2 shocks $62 off Amazon. Using POL brake lines and matching perportioning valve. I'm guessing $800 into the drop and disc brake conversion.