The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 02-13-2018, 08:36 AM   #1
Mains52
Registered User
 
Join Date: Jun 2016
Location: Knoxville, Illinois
Posts: 156
Installing an MII...

Hey guys I was just wondering if I need to wait until I have my control arms, spindles, and hubs in order to insure placement of my M II crossmember? Or can I just install it based of my axle center measurements and go from there?
Thanks for any knowledge in advance.
Mains52 is offline   Reply With Quote
Old 02-13-2018, 02:48 PM   #2
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 9,454
Re: Installing an MII...

You should be able to do it based on the manufacture's measurements on the instruction sheet. Some guys do tweak the location a bit because they feel it might center the tire in the wheel well better but most of the manufactures have it pretty close to right to begin with.
__________________
If you can't fix it with a hammer, you have an electrical problem.

My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
mr48chev is offline   Reply With Quote
Old 02-13-2018, 05:32 PM   #3
Dan in Pasadena
Senior Member
 
Dan in Pasadena's Avatar
 
Join Date: Nov 2008
Location: Pasadena, CA
Posts: 5,472
Re: Installing an MII...

^^^ As long as you’ll be ok with “pretty close”
__________________
'55 Big Window Shortbed,
Drive-It-&-Work-On-It slid down the "slippery slope" to a Frame-Off Rodstoration! LQ4/4l85e/C4 IFS/Mustang 8.8 rearend w/3.73's

Dan's '55 Big Window "Build" - Well, Kinda!
Dan in Pasadena is offline   Reply With Quote
Old 02-13-2018, 09:58 PM   #4
whitedog76
Registered User
 
Join Date: Jan 2014
Location: Peoria, IL
Posts: 891
Re: Installing an MII...

18 1/8 seems to be the magic number.

http://www.fulltiltstreetrods.com/47...%20Install.pdf

https://static.speedwaymotors.com/pd...7%20Heidts.pdf
whitedog76 is offline   Reply With Quote
Old 02-14-2018, 09:22 AM   #5
Mains52
Registered User
 
Join Date: Jun 2016
Location: Knoxville, Illinois
Posts: 156
Re: Installing an MII...

Quote:
Originally Posted by whitedog76 View Post
Thank You Ill be checking these links out.
Mains52 is offline   Reply With Quote
Old 02-16-2018, 10:22 AM   #6
Mains52
Registered User
 
Join Date: Jun 2016
Location: Knoxville, Illinois
Posts: 156
Re: Installing an MII...

Ok dudes who all has flattened the top of their frame for the spring hats ? the pdfs That whitedog sent both said to flatten the top of the frame.
Mains52 is offline   Reply With Quote
Old 02-16-2018, 04:05 PM   #7
agnes the dog
Registered User
 
agnes the dog's Avatar
 
Join Date: Sep 2012
Location: Fishers, IN
Posts: 257
Re: Installing an MII...

You didn't mention what year truck you're working on. The instruction sheet links are for 47-54.
__________________
Just because you can, doesn't necessarily mean you should.

1959 3100 stepside 355 + T5
agnes the dog is offline   Reply With Quote
Old 02-16-2018, 04:11 PM   #8
oldman3
Senior Member
 
oldman3's Avatar
 
Join Date: Mar 2011
Location: West Plains, Missouri
Posts: 6,005
Re: Installing an MII...

Main52, hope I don't come across as a "smart a$$", but I can't find anywhere in the PDF, where it says "flatten top of frame", for spring towers. I could be wrong if I am, I'm sorry.
I just want to help if I can.

Item #3 on both pdf's, do refer to boxing plates to frame, "grind frame rails edge flat so plates lay flat"

Item #6 on speedway pdf, refers to grinding the spring towers to fit the frame.

Both drawings show where the frame curves down in the front, the spring towers sides are straight and would need to match the frame.

I have a couple pics to show what they are talking about. First pic show boxing plate in place with the part of frame that needs to be removed. The second pic shows boxing plate in place with part cut out and top and both edges of frame ground flat to plate.
Attached Images
  

Last edited by oldman3; 02-16-2018 at 04:41 PM.
oldman3 is offline   Reply With Quote
Old 02-16-2018, 04:39 PM   #9
oldman3
Senior Member
 
oldman3's Avatar
 
Join Date: Mar 2011
Location: West Plains, Missouri
Posts: 6,005
Re: Installing an MII...

Main52, here's a couple more pics showing the area on frame where spring towers would need to be trimed.

Pic 1 shows the curve in a stock frame

Pic 2 shows the same area with a straight edge (like the spring tower). You would have to put it in place and scribe the tower and trim to fit frame.

Pic 3 spring tower in place on frame.

Hope this helps, and if you need more info let me know...Jim
Attached Images
   
oldman3 is offline   Reply With Quote
Old 02-16-2018, 04:45 PM   #10
oldman3
Senior Member
 
oldman3's Avatar
 
Join Date: Mar 2011
Location: West Plains, Missouri
Posts: 6,005
Re: Installing an MII...

I see in your build thread that you already have your boxing plates tacked in place, and received your crossmember. If I'm jumping to far ahead, you will need to remove the piece of old frame that goes up to the radiator crossmember, because that is where the rack and pinon opening in frame will go...Jim

Last edited by oldman3; 02-16-2018 at 08:33 PM.
oldman3 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:55 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Copyright 1997-2013 67-72chevytrucks.com