|
11-17-2004, 10:53 PM
|
#1 |
|
Registered User
Join Date: Oct 2003
Location: Myrtle Point Oregon
Posts: 24
|
66 C10 value
I've never posted on this board before. I have a 69 so I normally post there, but I figured that this would be the place for this one. My dad recently inherited a 66 SNB 1/2 ton 4x4. We need to sell it as we have too many rigs. I'm wondering what it's worth. It is a one owner rig. It has been on the same ranch since new. The body and interior are very nice for an unrestored rig. It was recently repainted the stock color to repair some minor dents and surface rust. The engine was rebuilt a few years ago and has almost no miles on it. Mechanically, it could use new seals, shocks and such, but everything works like new. The speedometer doesn't work, but the odometer shows 60,000. It probably doesn't have many more than that as it hasn't left the ranch in close to 30 years. Anywho, NADA gold book shows 6000 low and 11000 average. What do you guys think it should sell for. We are thinking of putting it on E-Bay. This is a really nice truck, and we'd like to see it go to someone who will restore it and drive the bejeezuz out of it.
Thanks in advance. Glenn |
|
|
|
11-18-2004, 07:07 AM
|
#2 |
|
Senior Member
Join Date: May 2003
Location: ne florida
Posts: 2,665
|
pics we need pics
|
|
|
|
|
11-18-2004, 07:20 AM
|
#3 |
|
user # 2756
 
Join Date: Jun 2001
Location: Chesapeake, Virginia
Posts: 4,612
|
pics and where are you at?
__________________
1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm 
|
|
|
|
|
11-18-2004, 09:18 AM
|
#4 |
|
Senior Member
Join Date: Jul 2004
Location: Clarks Hill, Indiana
Posts: 733
|
You said its a 66 SNB 1/2T 4X4, what does the SNB stand for?
|
|
|
|
|
11-18-2004, 03:01 PM
|
#5 |
|
Registered User
Join Date: Feb 2003
Location: The Rubber City
Posts: 5,498
|
short narrow (stepside) bed ?
__________________
1969 GMC K2500  1996 Honda Accord 2007 Kawasaki KLR 650 |
|
|
|
|
11-18-2004, 07:20 PM
|
#6 |
|
Account Suspended
Join Date: Oct 2002
Location: Elkhart, IN
Posts: 6,400
|
C10 = 2wd
|
|
|
|
|
11-19-2004, 12:44 AM
|
#7 |
|
Registered User
Join Date: Oct 2003
Location: Myrtle Point Oregon
Posts: 24
|
Yeah, I realized after a posted that I had written C10. I don't normally deal with 4 wheel drive. My last 4x4 was a 52 ford that I bought when I was 14. I am going to get some pics on Saturday. I want to wash off the dust and take out the seat cover and the plywood that is over the bed floor. Will post some pics as soon as I can. BTW I am in Oregon.
Glenn |
|
|
|
|
11-19-2004, 09:28 AM
|
#8 |
|
Led Sled! Discs R 4 ME!
Join Date: Jan 2001
Location: Toms River, NJ, USA (Transplanted Hoosier)
Posts: 7,327
|
Truck value guides
Just click on skip this ad on the first page of the Vehicle Condition or Class Scale link.
Demand my even be a bit higher for a short step 4wd http://207.44.196.117/vboard/showthread.php3?t=14754 Last edited by DennyB; 11-19-2004 at 09:30 AM. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
