What did you do to your truck today? Chapter II - Page 41 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

vidman · 08-09-2014, 12:54 PM

Set the cab this morning. Wanted to make sure I did not need the BFH. I will have to move my wire looms a bit but happy with the valve cover clearance..

**Elliot949** · 08-09-2014, 12:56 PM

Quote:

Originally Posted by vidman

Set the cab this morning. Wanted to make sure I did not need the BFH. I will have to move my wire looms a bit but happy with the valve cover clearance..

Very nice...

vidman · 08-09-2014, 03:39 PM

Quote:

Originally Posted by Elliot949

Very nice...

Thank You.. A lot of pay checks and nights out in the shop..

CST10 · 08-09-2014, 04:15 PM

Just changed the starter out on ol Samson.

ole dollor · 08-09-2014, 06:01 PM

Quote:

Originally Posted by Elliot949

Very nice...

I agree x 2 , that is very nice

68nou1 · 08-09-2014, 08:00 PM

Quote:

Originally Posted by vidman

Set the cab this morning. Wanted to make sure I did not need the BFH. I will have to move my wire looms a bit but happy with the valve cover clearance..

x3 That is and is going to be a sharp truck!

And to add to thread, i checked and adjusted my timing a bit, adjusting idle mixture screws to improve vacuum, and blew a brake line in the driveway coming back from taking the trash off.

muckyp · 08-09-2014, 11:37 PM

Did a little bed floor repair. When I started this, several days ago, I thought, this won't take long. Boy was I wrong. The old floor put up a good fight coming out.

colgad · 08-10-2014, 10:26 AM

Quote:

Originally Posted by muckyp

Did a little bed floor repair. When I started this, several days ago, I thought, this won't take long. Boy was I wrong. The old floor put up a good fight coming out.

I need to do this too. Thanks for the encouragement. :-(
Where did you source the patch?

ole dollor · 08-10-2014, 07:40 PM

well I am running a little late on the pc's I promised on the bed of ole dollor, wife had to have knee surgery and having to play nurse....so I got it all sanded and got the roll in bed liner installed, not a real good look like the stained wood I had, but I hope it last longer...first a pic of the bed when it was finished. then a pic of the bed the way it is now. still need to put the tool box back in..

**Elliot949** · 08-10-2014, 07:56 PM

I worked on the Wheel Tubs today that I got... man these are rough... I can make them pretty though...

Old_Skool · 08-10-2014, 08:06 PM

Got the last coat of varnish on the bed
Sry for the bad pic poor Lighting In The garage

Name: IMG_20140419_212346.jpg
Views: 830
Size: 59.2 KB

ole dollor · 08-10-2014, 08:10 PM

[QUOTE=Old_Skool;6796664]Got the last coat of varnish on the bed
Sry for the bad pic poor Lighting In The garage

first welcome to the forum from Texas, looking good on the bed, need some more pic's of the truck all over...

muckyp · 08-11-2014, 12:19 AM

Quote:

Originally Posted by colgad

I need to do this too. Thanks for the encouragement. :-(
Where did you source the patch?

I ordered the patch panel from LMC, but then had to cut it up to fit in the corner properly (sorta). FYI, the panels are not a real good match. The profiles are a little different.

VWNate1 · 08-11-2014, 08:44 AM

Doesn't Mar - K make these ? .

They're the best there is and American made too .

muckyp · 08-11-2014, 11:08 AM

I sure wish I had known that. The LMC ones are not good quality.

Gonepostal · 08-11-2014, 09:45 PM

Installed 01 Cadillac Deville power seats lots of fun

knomadd · 08-11-2014, 10:16 PM

Finished installing the bow tie in my new billet grille.

VWNate1 · 08-12-2014, 06:05 PM

I'm loving that blue bow tie ! .

The yellow ones are just WRONG .

Ridgeclimber · 08-12-2014, 11:42 PM

I picked up my seat and door panels today. Hopefully install them this weekend.

74baggedbug · 08-13-2014, 08:39 AM

Got this in the mail yesterday, hope to install it later this week

colgad · 08-13-2014, 08:47 AM

Got my drive shaft installed.
Now the C50 is back on the road, super singles and disk brakes in the back. Think the sway bar is big enough?
Long bed installation is next after a little rear end cleanup. Then tackle finding a front axle with disk also!

BugzC10 · 08-13-2014, 11:56 AM

Quote:

Originally Posted by colgad

Got my drive shaft installed.
Now the C50 is back on the road, super singles and disk brakes in the back. Think the sway bar is big enough?
Long bed installation is next after a little rear end cleanup. Then tackle finding a front axle with disk also!

That's cool...do you have a build tread?

colgad · 08-13-2014, 04:23 PM

Quote:

Originally Posted by BugzC10

That's cool...do you have a build tread?

Regrettably I do not, it's such a commitment. And I am not to good at those.

captain69 · 08-13-2014, 05:07 PM

Quote:

Originally Posted by knomadd

Finished installing the bow tie in my new billet grille.

What grill is this! God I love it.

sixtyeightC10 · 08-13-2014, 05:20 PM

Quote:

Originally Posted by muckyp

I sure wish I had known that. The LMC ones are not good quality.

I have gotten a few things from LMC truck, and I hate to say that all of the parts that I have gotten were not the best quality, but they did get the job done, like my heater control levers that always seem to be broken. And the headlight relay upgrade? What a joke! If I had realized that it was going to be cheaply made I would have made my own, like I had done on an old Jeep I had.

08-09-2014, 12:54 PM	#1001
vidman Registered User Join Date: Jun 2012 Location: Fitchburg,Mass Posts: 737	Re: What did you do to your truck today? Chapter II Set the cab this morning. Wanted to make sure I did not need the BFH. I will have to move my wire looms a bit but happy with the valve cover clearance.. Attached Images __________________ 62 Willys 4wd Pickup : 72 C-10 swb 504 stroker 09 Taco 3" lift 33" tires: 90 K-5 blazer (plow truck): RIP Ross Little brother

08-09-2014, 04:15 PM	#1004
CST10 Registered User Join Date: Sep 2013 Location: Gonzales, La Posts: 1,441	Re: What did you do to your truck today? Chapter II Just changed the starter out on ol Samson. __________________ MyToys: Goldilocks the "Ol School Survivor" 1968 C10, SWB Stepside, 08/15 TOTM, 250 CI 6 cylinder, 3 on the tree, 3.73 rear, 3/5 static drop, 23,500 original miles. Samson the 1970 CST10, LWB, 462Ci, Turbo 350 tranny, 3.08 rear gear, PB, PS, A/C, AM/FM, 2/4 Drop. Brutus the 1998 Camaro Z28, 33,500 original miles, LS1, 519 RWHP/497 RWTQ. Member of the Louisiana Classic Truck Club, LCTC Member of the Louisiana C10 Club Member of the Baton Rouge Drifters Car Club

08-09-2014, 11:37 PM	#1007
muckyp Registered User Join Date: Mar 2001 Location: Forney, Texas Posts: 290	Re: What did you do to your truck today? Chapter II Did a little bed floor repair. When I started this, several days ago, I thought, this won't take long. Boy was I wrong. The old floor put up a good fight coming out. Attached Images __________________ 70 SWB 454/TH400

08-10-2014, 07:40 PM	#1009
ole dollor Registered User Join Date: May 2012 Location: Anton, Texas Posts: 2,364	Re: What did you do to your truck today? Chapter II well I am running a little late on the pc's I promised on the bed of ole dollor, wife had to have knee surgery and having to play nurse....so I got it all sanded and got the roll in bed liner installed, not a real good look like the stained wood I had, but I hope it last longer...first a pic of the bed when it was finished. then a pic of the bed the way it is now. still need to put the tool box back in.. Attached Images

08-10-2014, 07:56 PM	#1010
Elliot949 Dan Johnston Join Date: Sep 2010 Location: Winfield, Ks. Posts: 4,162	Re: What did you do to your truck today? Chapter II I worked on the Wheel Tubs today that I got... man these are rough... I can make them pretty though... __________________ Dan Johnston... Owner of My Dad's- '67 Chevy C-20 Custom Camper Short Fleetside Pickup PAPA J And our newest addition a- '71 Chevy CST/10 Short Fleetside Pickup Haulin' SOLD Papa J's Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=612847 Haulin's Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=671130SOLD B Bears Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=744210

08-10-2014, 08:06 PM	#1011
Old_Skool Registered User Join Date: Apr 2014 Location: Rio Vista Ca Posts: 3	Re: What did you do to your truck today? Chapter II Got the last coat of varnish on the bed Sry for the bad pic poor Lighting In The garage

08-10-2014, 08:10 PM	#1012
ole dollor Registered User Join Date: May 2012 Location: Anton, Texas Posts: 2,364	Re: What did you do to your truck today? Chapter II [QUOTE=Old_Skool;6796664]Got the last coat of varnish on the bed Sry for the bad pic poor Lighting In The garage first welcome to the forum from Texas, looking good on the bed, need some more pic's of the truck all over...

08-11-2014, 08:44 AM	#1014
VWNate1 Registered User Join Date: Feb 2012 Location: So. Cali. Posts: 2,610	Beds & Parts Doesn't Mar - K make these ? . They're the best there is and American made too . __________________ -Nate Geezer '49 3100 235 W/ Muncie SM420 SOLD '69 C/10 shortbed sidemount survivor 250 L6 W/ 350TH

08-11-2014, 11:08 AM	#1015
muckyp Registered User Join Date: Mar 2001 Location: Forney, Texas Posts: 290	Re: What did you do to your truck today? Chapter II I sure wish I had known that. The LMC ones are not good quality. __________________ 70 SWB 454/TH400

08-11-2014, 09:45 PM	#1016
Gonepostal Registered User Join Date: Jun 2012 Location: Mobile Al Posts: 103	Re: What did you do to your truck today? Chapter II Installed 01 Cadillac Deville power seats lots of fun __________________ US Army Bomb Squad 83-96 There is no problem that a suitable amount of explosives cannot solve

08-11-2014, 10:16 PM	#1017
knomadd Registered User Join Date: Jul 2012 Location: Rosenberg, Texas Posts: 3,506	Re: What did you do to your truck today? Chapter II Finished installing the bow tie in my new billet grille. __________________ -Duane C/10 Club Texas member 1971 Chevy C10 "Brutus" SWB Fleetside 2016 6.0L (L96) 6L90E (driver/project) 1965 Pontiac GTO "Royal Goat" 400/TH400 w/AC (my baby)

08-12-2014, 06:05 PM	#1018
VWNate1 Registered User Join Date: Feb 2012 Location: So. Cali. Posts: 2,610	Re: What did you do to your truck today? Chapter II I'm loving that blue bow tie ! . The yellow ones are just WRONG . __________________ -Nate Geezer '49 3100 235 W/ Muncie SM420 SOLD '69 C/10 shortbed sidemount survivor 250 L6 W/ 350TH

08-12-2014, 11:42 PM	#1019
Ridgeclimber Registered User Join Date: Jul 2012 Location: Maple Ridge. B.C. Posts: 145	Re: What did you do to your truck today? Chapter II I picked up my seat and door panels today. Hopefully install them this weekend. Attached Images

08-13-2014, 08:39 AM	#1020
74baggedbug Registered User Join Date: Oct 2011 Location: Houston tx Posts: 699	Re: What did you do to your truck today? Chapter II Got this in the mail yesterday, hope to install it later this week

08-13-2014, 08:47 AM	#1021
colgad Registered User Join Date: Jun 2006 Location: Lutz, Florida Posts: 838	Re: What did you do to your truck today? Chapter II Got my drive shaft installed. Now the C50 is back on the road, super singles and disk brakes in the back. Think the sway bar is big enough? Long bed installation is next after a little rear end cleanup. Then tackle finding a front axle with disk also! Attached Images __________________ 1967 Red, C10 Short Bed 6.0L T5 5 speed 1967 Orange and Black C50 6.2 Detroit Diesel NV4500, 2 Ton Pickup 1972 White, Chevy Blazer 2WD 67 Dog house 5.3 4L65 2016 Power Tour LH 1955 Red-Cream, Chevrolet Nomad, restoration on hold 2004 Black, Corvette Z06 LS6 convertible (Rock solid Fun) 2011/2018 Power Tour



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.