The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Electrical

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 10-26-2018, 08:39 PM   #1
Clifford69
Registered User
 
Clifford69's Avatar
 
Join Date: Jun 2008
Location: Odenton, MD
Posts: 24
Another blinker problem...

I have read through a ton of threads and I haven't happened upon one that describes my problem...

69 Chevy C10 with an American Autowire kit. I took the front end off to replace the transmission when I put it all back together I discovered this problem.

All of my blinkers work normally with the lights off except for the front passenger side blinker. When the lights are on the front blinker light doesn't come on at all, everything else works as normal.

On the 1157 bulb there is a long filament and a short filament. The way it should work is the short filament is the blinker and the long filament is for the parking lights - at least that's how it works on the drivers side. On the passenger side the long filament lights up with the blinker when the lights are off, but nothing works when the lights are on.

I have switched the leads with no change to the problem. I also ran a ground wire from the battery to the light socket with no change. Positive voltage are nearly identical between the drivers side and passenger side blinkers.

Any assistance would be greatly appreciated!
Clifford69 is offline   Reply With Quote
 

Bookmarks

Tags
blinker


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:14 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com