Homemade tracking bar? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BW71 · 10-31-2001, 10:51 AM

Put new bushings in my track bar and an old sleeve didn't come out so took it to a shop, problem solved. The guy says did you make that track bar? I told him no but it does look homemade. Heres a description: The eyes are the right size and have about two inches of 1/2 inch bar stock before it run inside the main bar but the main bar is about an inch thick with holes drilled in it and spot welded to the smaller bar running inside it.It's got some really crappy welds on it.
It fits and seems to work but just wondering if thats how they are supposed to be

10-31-2001, 10:51 AM	#1
BW71 Registered User Join Date: Oct 2001 Posts: 350	Homemade tracking bar? Put new bushings in my track bar and an old sleeve didn't come out so took it to a shop, problem solved. The guy says did you make that track bar? I told him no but it does look homemade. Heres a description: The eyes are the right size and have about two inches of 1/2 inch bar stock before it run inside the main bar but the main bar is about an inch thick with holes drilled in it and spot welded to the smaller bar running inside it.It's got some really crappy welds on it. It fits and seems to work but just wondering if thats how they are supposed to be __________________ 71 C-10 custom Deluxe Leavenworth, Kansas



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.