Anyone Interested in these Parts? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**1971Stepside** · 09-06-2018, 11:39 AM

I have a 2003 LQ4 with the following take off parts available. I understand they are common and may not be needed, but thought I would offer here first.

Truck Intake (no rails or tb)
6.0 Stock Exhaust Manifolds
6.0 Stock Camshaft (140k miles)
Truck Oil Pan, tube, and windage tray
Dipstick and tube

I can post pics of any of the parts if you are interested. Make offers.

Thanks

**michael bustamante** · 09-10-2018, 06:00 PM

I need the cover mount plate bolted to the top of the intake if you have it, it the rear square plate that holds the back of the engine cover.

**1971Stepside** · 09-11-2018, 10:31 AM

Sorry Michael. That part went with the covers when I sold them. I was able to get rid of all the other parts yesterday. Just have the dipstick and tube remaining.

**michael bustamante** · 09-11-2018, 04:48 PM

ok bud no worries. thank you

solidaxel · 09-19-2018, 09:48 AM

I am looking for a Corvette oil pan with the "Wings"

hounddogs! · 09-20-2018, 06:10 PM

Would $20 get the dipstick and tube shipped to 66049?

Loren

**1971Stepside** · 09-21-2018, 12:20 PM

Loren, not sure why the UPS quote from Springfield to Lawrence is so much. Would you do it for $25? If so, PM me your address and I'll get it out. My PayPal is in my signature.

Thanks!

hounddogs! · 09-25-2018, 11:59 AM

Quote:

Originally Posted by 1971Stepside

Loren, not sure why the UPS quote from Springfield to Lawrence is so much. Would you do it for $25? If so, PM me your address and I'll get it out. My PayPal is in my signature.

Thanks!

PM sent

**1971Stepside** · 09-25-2018, 01:53 PM

Got it. Shoot me your address

tmills213 · 09-30-2018, 10:47 PM

clarifying per your post above... the oil pan is gone right? i need to put turbo drain in and anticipate....me haha

**1971Stepside** · 10-01-2018, 09:25 AM

All parts are gone/sold.

09-06-2018, 11:39 AM	#1
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,928	Anyone Interested in these Parts? I have a 2003 LQ4 with the following take off parts available. I understand they are common and may not be needed, but thought I would offer here first. Truck Intake (no rails or tb) 6.0 Stock Exhaust Manifolds 6.0 Stock Camshaft (140k miles) Truck Oil Pan, tube, and windage tray Dipstick and tube I can post pics of any of the parts if you are interested. Make offers. Thanks __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

09-10-2018, 06:00 PM	#2
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,814	Re: Anyone Interested in these Parts? I need the cover mount plate bolted to the top of the intake if you have it, it the rear square plate that holds the back of the engine cover. __________________ 1967custom

09-11-2018, 10:31 AM	#3
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,928	Re: Anyone Interested in these Parts? Sorry Michael. That part went with the covers when I sold them. I was able to get rid of all the other parts yesterday. Just have the dipstick and tube remaining. __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

09-11-2018, 04:48 PM	#4
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,814	Re: Anyone Interested in these Parts? ok bud no worries. thank you __________________ 1967custom

09-19-2018, 09:48 AM	#5
solidaxel Registered User Join Date: Dec 2002 Location: Cactus Patch So. Az Posts: 4,749	Re: Anyone Interested in these Parts? I am looking for a Corvette oil pan with the "Wings" __________________ 53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD) 53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25 55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73 62 Solidaxle Corvette Roman Red (327 340hp 4spd 3:36) C4 & C5 suspension tube chassis LS 3 4L70E 65 Corvette Coupe 327 350hp 4spd 4:11 78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42 2000 S-Type 3.0 (wife cruiser) 2003 GMC SCSB 5.3 4L60E 3:42

09-20-2018, 06:10 PM	#6
hounddogs! Restoring it $200 at a time... Join Date: Aug 2008 Location: NE Kansas Posts: 886	Re: Anyone Interested in these Parts? Would $20 get the dipstick and tube shipped to 66049? Loren __________________ Charter member of the 'Put the dimmer switch back on the damn floor where it belongs' Society '68 5.3L-4 speed LWB C20; grandpa bought it for the farm in '71. Now LS 5.3, rather than 327. DD '09 Pilot Weekender '65 Skylark 300-4V-4 speed Wife's '07 Lexus ES350; 117 actuator motors and I can't see the engine. Son's '04 F250 SuperCab 6.0

09-21-2018, 12:20 PM	#7
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,928	Re: Anyone Interested in these Parts? Loren, not sure why the UPS quote from Springfield to Lawrence is so much. Would you do it for $25? If so, PM me your address and I'll get it out. My PayPal is in my signature. Thanks! __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

09-25-2018, 01:53 PM	#9
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,928	Re: Anyone Interested in these Parts? Got it. Shoot me your address __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

09-30-2018, 10:47 PM	#10
tmills213 Registered User Join Date: Jan 2011 Location: Normal il Posts: 173	Re: Anyone Interested in these Parts? clarifying per your post above... the oil pan is gone right? i need to put turbo drain in and anticipate....me haha

10-01-2018, 09:25 AM	#11
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,928	Re: Anyone Interested in these Parts? All parts are gone/sold. __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.