The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevy/GMC Suburbans & Panels Message Board > 1967 - 1972 Chevy/GMC Suburbans and PanelsProjects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-02-2017, 02:25 PM   #1
GIZZ
Registered User
 
GIZZ's Avatar
 
Join Date: Jun 2005
Location: Vancouver
Posts: 82
69 Panel - Project needs a name

I've been on a few forums over the years having different cars. The 1 thing I've never done is a build thread. Today is the day!

Background, I bought this '69 panel way back in 2006. Immediately got 4/6 drop springs, found some new cpp rear arms cheap. I got a 6.0 from a silverado, carb and msd injector controller. I bought a whole running(rusty) '89 burb for the front clip & also the A/C bits.

Then I got divorced. Then I sold the house, I kept the new parts I accumulated but many of the used burb parts ended up at the recycler. Whatever I left in the old garages hidden attic stayed there until they bulldozed it.

Many of the old pics are being held hostage on Photobucket!!! Being 2017 I'm going to try and document what I can on video and store it on YouTube. I'm hoping I can learn a thing or 2 about video editing along the way, I can rebuild an engine but this video editing is foreign to me.

Some pics I still have - Shortly after I got her, sported the exact same look the last 10 years! Also a pic of my parts burb & my old hauler. And another old pic of her roomate & also my daily driver(at the time)cst10.
Attached Images
   
__________________
GIZZmotorsports on YouTube & my panel truck build

'69 c10 panel, '75 c35 flatdeck car hauler
GIZZ is offline   Reply With Quote
Old 09-02-2017, 02:32 PM   #2
GIZZ
Registered User
 
GIZZ's Avatar
 
Join Date: Jun 2005
Location: Vancouver
Posts: 82
Re: 69 Panel - Project needs a name

as promised, here goes
__________________
GIZZmotorsports on YouTube & my panel truck build

'69 c10 panel, '75 c35 flatdeck car hauler
GIZZ is offline   Reply With Quote
Old 09-03-2017, 05:19 PM   #3
CG
BlahBlahBlah
 
Join Date: Feb 2002
Location: Monroe, Wa.
Posts: 14,497
Re: 69 Panel - Project needs a name

Looks like a great start. As far as a name, I got nothing =) I never really got the naming thing, but lots of people here put a name to their projects so Im probably in the minority.
CG is online now   Reply With Quote
Old 09-12-2017, 02:16 AM   #4
GIZZ
Registered User
 
GIZZ's Avatar
 
Join Date: Jun 2005
Location: Vancouver
Posts: 82
Re: 69 Panel - Project needs a name

Thanks! I can't wait to get to your stage of the build. Out of my 50+ vehicles I've only named one, and that was back in high school. I usually just refer to them by color.

Well, pulled the trans yesterday. So engine and trans are now out.

Got front and rear brakes in the mail, this is the first time I've see a c10 front disc brake rotor setup like this. Also the only 6 lug front with 1/2-20 wheel studs I've seen in a kit. I'm hoping the front and rear rotors are off the shelf items somewhere local to me.

__________________
GIZZmotorsports on YouTube & my panel truck build

'69 c10 panel, '75 c35 flatdeck car hauler
GIZZ is offline   Reply With Quote
Old 09-17-2017, 11:19 PM   #5
GIZZ
Registered User
 
GIZZ's Avatar
 
Join Date: Jun 2005
Location: Vancouver
Posts: 82
Re: 69 Panel - Project needs a name

pulled the front clip today, by myself.

http://www.youtube.com/watch?v=Twtvf...youtu.be&t=13s

Also check out this(water leak?)mod the previous owner did??? It can't be stock, I should get rid of it all?

http://www.youtube.com/watch?v=Me1G9...ature=youtu.be
Attached Images
 
__________________
GIZZmotorsports on YouTube & my panel truck build

'69 c10 panel, '75 c35 flatdeck car hauler

Last edited by GIZZ; 09-18-2017 at 04:58 PM.
GIZZ is offline   Reply With Quote
Old 09-18-2017, 12:07 AM   #6
CG
BlahBlahBlah
 
Join Date: Feb 2002
Location: Monroe, Wa.
Posts: 14,497
Re: 69 Panel - Project needs a name

My av picture is just a computer rendering.
CG is online now   Reply With Quote
Old 10-17-2017, 01:17 AM   #7
GIZZ
Registered User
 
GIZZ's Avatar
 
Join Date: Jun 2005
Location: Vancouver
Posts: 82
Comparing crossmembers

Pulled the orig crossmember out for cleaning this afternoon. Torn as to which one to use. The top one is from a 1/2 ton 2wd Ď91 Suburban. The lower one, still dirty is from this Ď69 panel. I had to weigh them both twice cuz I wasnít sure of the 8.5lbs difference in weight.

Iím also not sure if I want to run the rubber control arm bushings or the older arms and solid bushings. I used to daily drive a Ď68 on solid and I never had an issue with the ride. I like the added caster of the newer setup, but I think I can drill the lower shafts to get this.

Any suggestions?
Attached Images
    
__________________
GIZZmotorsports on YouTube & my panel truck build

'69 c10 panel, '75 c35 flatdeck car hauler
GIZZ is offline   Reply With Quote
Old 11-16-2017, 06:23 AM   #8
GIZZ
Registered User
 
GIZZ's Avatar
 
Join Date: Jun 2005
Location: Vancouver
Posts: 82
Re: 69 Panel - Project needs a name

In trying to decide what parts to use I figured out there is caster to be gained with the newer crossmember. The upper control arms mount further back on the squarebody crossmember vs the older one. I'm comparing '69 to a '91 suburban here. So there's your caster, unless of course the locating pin for lower arms isn't also moved back on the newer x member!

Here's what I'm talking about. Maybe ignore the exact #'s on x member weight differences, I was going by memory. Older x member really closer to 8.5 lbs lighter. The 4 older control arms also about 17# lighter than newer ones.
__________________
GIZZmotorsports on YouTube & my panel truck build

'69 c10 panel, '75 c35 flatdeck car hauler
GIZZ is offline   Reply With Quote
Old 09-13-2018, 12:05 PM   #9
GIZZ
Registered User
 
GIZZ's Avatar
 
Join Date: Jun 2005
Location: Vancouver
Posts: 82
Re: 69 Panel - Project needs a name

Spent a couple of hours in the shop yesterday, pulled the body back off the frame and proceeded to remove old undercoat. I was mostly using an oscillating tool with a flat metal blade, simple green in some spots then the most caustic brake clean I have(this stuff strips pain). Any tips and suggestions? If I have some decent weather on my next days off I want to roll it outside and hit it with the pressure washer and maybe the sand water blaster.

I really wanted to paint the frame with Rustbullet, and at this point I will. In hindsight I should have skipped this step and got to swapping the body mounts, new brakes and driveline.

Watch these pics be upside down...
Attached Images
    
__________________
GIZZmotorsports on YouTube & my panel truck build

'69 c10 panel, '75 c35 flatdeck car hauler

Last edited by GIZZ; 09-13-2018 at 11:06 PM.
GIZZ is offline   Reply With Quote
Old 10-18-2018, 11:17 AM   #10
GIZZ
Registered User
 
GIZZ's Avatar
 
Join Date: Jun 2005
Location: Vancouver
Posts: 82
Re: 69 Panel - Project needs a name

Honestly if thereís a next time Iíll either send it out for powder coating or just skip the frame entirely and get to the mechanicals. Here are 3 coats of rustbellet auto silver followed up with 1 coat of black shell topcoat. Canít wait to start installing the new driveline.
Attached Images
  
__________________
GIZZmotorsports on YouTube & my panel truck build

'69 c10 panel, '75 c35 flatdeck car hauler
GIZZ is offline   Reply With Quote
Old 10-18-2018, 01:47 PM   #11
Burb
Coordinator of Synchronicity
 
Burb's Avatar
 
Join Date: Dec 2005
Location: West of Houston, TX
Posts: 366
Re: 69 Panel - Project needs a name

... looking good
__________________
Rick

1971 Suburban ... W.I.P. Build Thread
Customization is ones personal touch-- not what other people think it should be
Burb is offline   Reply With Quote
Old 11-05-2018, 02:26 PM   #12
GIZZ
Registered User
 
GIZZ's Avatar
 
Join Date: Jun 2005
Location: Vancouver
Posts: 82
Re: 69 Panel - Project needs a name

Quote:
Originally Posted by Burb View Post
... looking good
Thanks! I should show this to the wife!

Got the body temporarily on the frame in order to work on... the wifeís car.

Iím liking this low look but itís currently laying on frame with no rear springs but tall farmtruck tires. I like the tall tire look but may end up running 295/50-15ís on the street and use my leftover 28Ē M&H at the track. I wish they made more 15Ē sizes.
Attached Images
 
__________________
GIZZmotorsports on YouTube & my panel truck build

'69 c10 panel, '75 c35 flatdeck car hauler
GIZZ is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:17 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com