6 luggers - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jchav62 · 04-16-2009, 08:54 AM

Hey Tony,

Those rings on those Rally's are killer! Where did you find those?

protrash64 · 04-16-2009, 04:01 PM

Quote:

Originally Posted by retodd7711

I tried my '00 Silverado rims on my '62 and they hit the a-arm.
Tried a set of rallyes with a 4.25" backspacing and they hit also.
Not starting an argument, just saying.

.......I get ya

.......I bet its a diameter issue. I have 18 and 20 inch wheels. If it was 15 I mite be in trouble, but both my sets have 5+ inches of backspace. The Silverado wheels are probably 16''.

stevedh76 · 04-16-2009, 04:24 PM

I have 15 X 10 4x4 rallys on the 62 with 295/50r15's all around. getting ready to change to 15 X 7 Coker smoothies and white walls though....

*LILRED66* · 04-16-2009, 04:35 PM

Quote:

Originally Posted by jchav62

Hey Tony,

Those rings on those Rally's are killer! Where did you find those?

Those rings were on one of my trucks and I haven't been able to find them anywhere. Maybe someone will recognize them and have a source. I checked all the usual suspects, to no avail.

daveodom · 04-16-2009, 04:54 PM

2008 Nissan Titan factory take-offs. Had to machine the centers to fit over the rear axles. Other than that they fit perfect. 20" x 8" with 5 1/2" b.s.

TwoFiftyShifter · 04-16-2009, 09:37 PM

Im gonna use a set of aluminum slots, 15x7 on my 64. Old school look.

k14burb · 04-16-2009, 10:28 PM

I like the slotts on my 4x4.

If I had a 2wd, I'd run rallys, like my '73.

onebad65c10 · 04-18-2009, 05:15 PM

Here is a pic of my 65 Shorty

with the old wheels. American reacing nitros 16x8 off of a 1997 Chevrolet Tahoe 4wd. The tires were 245/60/16 Goodyear eagle's.

Now here are the new wheels K5 blazer 15x8 rallys. In the pic I have just the centers on them but now I have the stainless liners. The tires are BF goodrich Radial t/a 245-60-15's

**62 Longbed** · 04-19-2009, 07:05 AM

Using the Factory Rallys ..

aboz · 04-24-2009, 10:44 PM

Six lug 8 x 15 Corvette Rally rims from Gradiot Tire page on ebay. The center caps are plastic but the whole set was only $350 shipped!

70 Suburban · 04-27-2009, 09:52 PM

if all goes well and they offset will work.....2008 chevy take of 20s

TwiggyTheDrummer · 04-30-2009, 07:13 PM

20" BOSS Motorsports 313 Chrome wheels with Kumho Ecsta STX 275/45/R20's.

yelton57 · 11-19-2011, 02:24 PM

Quote:

Originally Posted by LILRED66

Those rings were on one of my trucks and I haven't been able to find them anywhere. Maybe someone will recognize them and have a source. I checked all the usual suspects, to no avail.

'56 Cadillac.

Rich 5150 69 · 11-19-2011, 02:51 PM

Quote:

Originally Posted by yelton57

'56 Cadillac.

No I don`t believe so, caddys were full hubcaps...

yelton57 · 11-19-2011, 03:05 PM

Looks like caddy caps with the centers cut out

kenmel · 11-19-2011, 04:34 PM

Cragar Soft 8's on 35's

LILJP's66 · 11-19-2011, 04:51 PM

could very well be caddy caps

Greshampiglet · 11-19-2011, 08:17 PM

American Racing Wheel on Mine

skidpan · 11-19-2011, 11:25 PM

Centerline tomahawk 20 hopefully. Don't know what they will look like on the truck.

Posted via Mobile Device

Max1775 · 11-20-2011, 02:16 AM

Good resurrected thread.
Posted via Mobile Device

Turkey · 11-20-2011, 09:20 AM

Name: IMAG0699.jpg
Views: 2994
Size: 33.8 KB

Name: IMAG1009.jpg
Views: 3298
Size: 43.9 KB

Wheel Vintiques steel smoothies.

**aerotruk63** · 11-20-2011, 09:37 AM

Stock 16" widened to 9 3/4"

Stock 17.5" modified to 17" view on the rear

SIDS65 · 11-20-2011, 01:54 PM

Running big and little stock steel wheels but going to change over to 5 lug and run Cragar 610 g. The pic of the truck purple is when I first got it. It had 6 lug rallys.

**jocko** · 11-20-2011, 02:07 PM

Aerotruk - quick question for ya, I'm a bit stupid when it comes to 16" wheels... You mentioned they are stock - did any half-tons actually come with 16" wheels, if so, which ones?

More importantly!! Does anyone know if those stock 16" steel wheels will clear an 11" disk brake kit - say like what CPP or POL, etc offer? I have a lead on some 16" stock 6 lugs, but only way I can confirm they may work with disks is by your all's expertise! Appreciate any thoughts... Don't know if the stock 16"ers have the inner rim taper like 15" wheels do - I assume they do - but wondering if the extra diameter eliminates that worry by displacing the taper another 1/2" from the caliper...

Sid, I LOVE the new cast look cragars, that's an awesome wheel.

SIDS65 · 11-20-2011, 05:38 PM

Jocko the best part about the new Cragars is the price. They are about $130 a wheel verses $180 for Torque Thrusts. I really wanted 6 lug Chrome Reverses but thet were about $200 wheel shipping included but 4 ot 5 weeks out. Got my new Cragars through Jegs and the shipping was free.

04-16-2009, 08:54 AM	#51
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: 6 luggers Hey Tony, Those rings on those Rally's are killer! Where did you find those? __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

04-16-2009, 04:24 PM	#53
stevedh76 Shlongbed #20 Join Date: Apr 2009 Location: Artesia, NM Posts: 55	Re: 6 luggers I have 15 X 10 4x4 rallys on the 62 with 295/50r15's all around. getting ready to change to 15 X 7 Coker smoothies and white walls though.... __________________ SEMPER FIDELIS - USMC 1962 Chevy C10 LWB StepSide 235/4 speed 1976 GMC Sierra C15 LWB Fleetside 350/350 ------------------------------------------- 1999 Acura Integra LS 2008 Vulcan 900 Custom

04-16-2009, 04:54 PM	#55
daveodom Registered User Join Date: Feb 2008 Location: Ozark, Missouri Posts: 83	Re: 6 luggers 2008 Nissan Titan factory take-offs. Had to machine the centers to fit over the rear axles. Other than that they fit perfect. 20" x 8" with 5 1/2" b.s. Attached Images __________________ My 64' c-10 build thread "Carla Marie" http://67-72chevytrucks.com/vboard/s...d.php?t=319356 My 65' c-60 http://67-72chevytrucks.com/vboard/s...d.php?t=321822

04-16-2009, 09:37 PM	#56
TwoFiftyShifter Registered User Join Date: Nov 2008 Location: Gwinnett GA Posts: 1,803	Re: 6 luggers Im gonna use a set of aluminum slots, 15x7 on my 64. Old school look. __________________ 1982 K10 SWB 1987 V20 - Sold - Doh!

04-16-2009, 10:28 PM	#57
k14burb Registered User Join Date: Jan 2006 Location: So. NV. Posts: 153	Re: 6 luggers I like the slotts on my 4x4. If I had a 2wd, I'd run rallys, like my '73. __________________ ‘66 Suburban 4x4 LQ4/4L80e Dana 60’s ‘67 Camaro RS/SS convertible 350/700r4 ‘74 K10 Stepside 402/TH350

04-18-2009, 05:15 PM	#58
onebad65c10 Gm for life. Join Date: Jan 2009 Location: Baltimore, Md Posts: 119	Re: 6 luggers Here is a pic of my 65 Shorty with the old wheels. American reacing nitros 16x8 off of a 1997 Chevrolet Tahoe 4wd. The tires were 245/60/16 Goodyear eagle's. Now here are the new wheels K5 blazer 15x8 rallys. In the pic I have just the centers on them but now I have the stainless liners. The tires are BF goodrich Radial t/a 245-60-15's

04-19-2009, 07:05 AM	#59
62 Longbed Senior Member Join Date: Nov 2008 Location: Gresham , Oregon Posts: 589	Re: 6 luggers Using the Factory Rallys .. Attached Images

04-24-2009, 10:44 PM	#60
aboz Registered User Join Date: Feb 2009 Location: indian trail, nc Posts: 192	Re: 6 luggers Six lug 8 x 15 Corvette Rally rims from Gradiot Tire page on ebay. The center caps are plastic but the whole set was only $350 shipped! Attached Images __________________ ABOZ

04-27-2009, 09:52 PM	#61
70 Suburban Rods Join Date: Nov 2002 Location: Bryan, TX Posts: 1,398	Re: 6 luggers if all goes well and they offset will work.....2008 chevy take of 20s

04-30-2009, 07:13 PM	#62
TwiggyTheDrummer Keep It Simple Stupid.. Nope.. Join Date: Jan 2009 Location: Live Oak, FL Posts: 665	Re: 6 luggers 20" BOSS Motorsports 313 Chrome wheels with Kumho Ecsta STX 275/45/R20's. __________________ 1963 GMC SWB Fleetside in Sunburst Orange Metallic 305E V6 w/ Plaid VC, Powerglide, BOSS 313 20" Chrome Wheels, Kumho Ecsta STX 275/45/R20's, Alpine/Clarion System, Dynomax Exhaust Old custom classic trucks have soul. Their dashboards aren't plastic, and they've survived both the best and worst of what the 20th century had to offer. For the owners of these trucks, it's often the same story. Through both good and bad times they persevered, until one day they could turn the key and roll up in a customized truck everyone with good taste would admire. – Custom Classic Trucks

11-19-2011, 03:05 PM	#65
yelton57 Registered User Join Date: Nov 2011 Location: Rolla, Mo Posts: 41	Re: 6 luggers Looks like caddy caps with the centers cut out

11-19-2011, 04:34 PM	#66
kenmel Registered User Join Date: Oct 2011 Location: Sheridan, Arkansas Posts: 95	Re: 6 luggers Cragar Soft 8's on 35's Attached Images

11-19-2011, 04:51 PM	#67
LILJP's66 Registered User Join Date: Mar 2011 Location: Blacksburg VA Posts: 81	Re: 6 luggers could very well be caddy caps Attached Images

11-19-2011, 08:17 PM	#68
Greshampiglet Registered User Join Date: Oct 2010 Location: Gresham, Oregon Posts: 93	Re: 6 luggers American Racing Wheel on Mine Attached Images __________________ GreshamP1GLET

11-19-2011, 11:25 PM	#69
skidpan Registered User Join Date: Oct 2010 Location: Barstow Ca Posts: 53	Re: 6 luggers Centerline tomahawk 20 hopefully. Don't know what they will look like on the truck. Posted via Mobile Device



Register or Log In To remove these advertisements.

11-20-2011, 02:16 AM	#70
Max1775 Registered User Join Date: Mar 2011 Location: Bandera, Texas Posts: 251	Re: 6 luggers Good resurrected thread. Posted via Mobile Device

11-20-2011, 09:20 AM	#71
Turkey Registered User Join Date: Dec 2009 Location: Orlando, Florida Posts: 427	Re: 6 luggers Wheel Vintiques steel smoothies. __________________

11-20-2011, 09:37 AM	#72
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,625	Re: 6 luggers Stock 16" widened to 9 3/4" Stock 17.5" modified to 17" view on the rear __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

11-20-2011, 01:54 PM	#73
SIDS65 Registered User Join Date: Jan 2007 Location: Kincaid IL Posts: 26	Re: 6 luggers Running big and little stock steel wheels but going to change over to 5 lug and run Cragar 610 g. The pic of the truck purple is when I first got it. It had 6 lug rallys. Attached Images

11-20-2011, 02:07 PM	#74
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,934	Re: 6 luggers Aerotruk - quick question for ya, I'm a bit stupid when it comes to 16" wheels... You mentioned they are stock - did any half-tons actually come with 16" wheels, if so, which ones? More importantly!! Does anyone know if those stock 16" steel wheels will clear an 11" disk brake kit - say like what CPP or POL, etc offer? I have a lead on some 16" stock 6 lugs, but only way I can confirm they may work with disks is by your all's expertise! Appreciate any thoughts... Don't know if the stock 16"ers have the inner rim taper like 15" wheels do - I assume they do - but wondering if the extra diameter eliminates that worry by displacing the taper another 1/2" from the caliper... Sid, I LOVE the new cast look cragars, that's an awesome wheel.

11-20-2011, 05:38 PM	#75
SIDS65 Registered User Join Date: Jan 2007 Location: Kincaid IL Posts: 26	Re: 6 luggers Jocko the best part about the new Cragars is the price. They are about $130 a wheel verses $180 for Torque Thrusts. I really wanted 6 lug Chrome Reverses but thet were about $200 wheel shipping included but 4 ot 5 weeks out. Got my new Cragars through Jegs and the shipping was free.

Register or Log In To remove these advertisements.