Box Dimensions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kgmunro · 04-10-2011, 06:20 PM

How much has to be cut off a long box stepside box panel to make it a short box? I am thinking 2 inches off behind the wheel and maybe 9 inches in front??

Dan Bowles · 04-10-2011, 06:26 PM

Long bed as in a REAL long bed or a 3/4 ton? AD? TF?

**JML55** · 04-10-2011, 08:10 PM

I think i cut 2" at the back and 8" at the front. That was from a 3/4 ton box sides.

Rusty Hooker · 04-10-2011, 08:38 PM

Long bed 124" wheel base
Short bed 114" wheel base
ish

Dan Bowles · 04-10-2011, 08:41 PM

1 ton long bed is 137 1/2" wheel base.

dicer · 04-10-2011, 10:14 PM

Its kinda difficult to get near to measure my short fleetside.
From the front of the wheel opening up into where the small bottom radius is tangent to the vertical portion, and to the front of the bed it measures 23 inches.
On the rear section measuring at the bottom most point of the wheel opening to the seam or crack that runs vertical to the section that holds the tail lights it measures 20.5 inches I could be off about 1/16 or so inches on that one.

kgmunro · 04-11-2011, 05:46 AM

sorry, mine is a 57 3/4 ton long box. 2 inches and 8 inches sounds about right.

04-10-2011, 06:20 PM	#1
kgmunro Registered User Join Date: May 2009 Location: Brandon Manitoba Canada Posts: 342	Box Dimensions How much has to be cut off a long box stepside box panel to make it a short box? I am thinking 2 inches off behind the wheel and maybe 9 inches in front??

04-10-2011, 06:26 PM	#2
Dan Bowles AD Addict Join Date: Oct 2009 Location: Blissfield, MI Posts: 822	Re: Box Dimensions Long bed as in a REAL long bed or a 3/4 ton? AD? TF?

04-10-2011, 08:10 PM	#3
JML55 Senior Member Join Date: Nov 2008 Location: Fannystelle, Manitoba, Canada Posts: 849	Re: Box Dimensions I think i cut 2" at the back and 8" at the front. That was from a 3/4 ton box sides. __________________ Jean-Marc Lacasse 57 GMC 55 GMC 55 Belair 99 S10 http://67-72chevytrucks.com/vboard/s...d.php?t=316140 http://67-72chevytrucks.com/vboard/s...d.php?t=806011

04-10-2011, 08:38 PM	#4
Rusty Hooker Registered User Join Date: Feb 2011 Location: North Vancouver, BC Posts: 67	Re: Box Dimensions Long bed 124" wheel base Short bed 114" wheel base ish

04-10-2011, 08:41 PM	#5
Dan Bowles AD Addict Join Date: Oct 2009 Location: Blissfield, MI Posts: 822	Re: Box Dimensions 1 ton long bed is 137 1/2" wheel base.

04-10-2011, 10:14 PM	#6
dicer Registered User Join Date: Dec 2010 Location: seattle, wa Posts: 529	Re: Box Dimensions Its kinda difficult to get near to measure my short fleetside. From the front of the wheel opening up into where the small bottom radius is tangent to the vertical portion, and to the front of the bed it measures 23 inches. On the rear section measuring at the bottom most point of the wheel opening to the seam or crack that runs vertical to the section that holds the tail lights it measures 20.5 inches I could be off about 1/16 or so inches on that one.

04-11-2011, 05:46 AM	#7
kgmunro Registered User Join Date: May 2009 Location: Brandon Manitoba Canada Posts: 342	Re: Box Dimensions sorry, mine is a 57 3/4 ton long box. 2 inches and 8 inches sounds about right.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.