|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
07-05-2018, 09:53 PM
|
#1 |
|
Registered User
Join Date: Mar 2014
Location: Ontario
Posts: 44
|
Brake lights and turn signal electrical issues
On my 1998 K1550 when I'm driving and my running lights are off, the brake lights work fine but sometimes so I'm told my signals will switch, but they act normally otherwise. When the running are on the turn signals act as if they have a burnt bulb with the signal going double time and the brake lights don't seem to be noticeably different. Any suggestions. This is only a few of the issues.
|
|
|
|
07-07-2018, 06:33 AM
|
#2 |
|
Registered User
 
Join Date: Oct 2007
Location: pittston,PA
Posts: 1,183
|
Re: Brake lights and turn signal electrical issues
check your grounds. I had a broken ground strap that went from the body to the frame that caused similar issues. the ground straps I ha a problem with are on the passenger side frame rail in the front by the cab mount. also check you ground at the back of the frame driver side near the bumper bracket inboard side. hope this helps.
__________________
There is nothing you can't fix with a BFH or a FIRE WRENCH. 1997 chevy k1500 ext cab z71 (daily driver) sold 1996 chevy k1500 reg cab 4x4(daily driver)totaled 2008jeep patriot (wife's daily driver 2008 chevy 1500 ext cab 4x4 sold 2011 chevy 1500 crew cab ltz (daily driver) 1996 chevy 1500 reg cab 4x4 project sold 2006 pontiac grand prix gxp (daily work commuter) |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
