Help! Plastic thrust washer and rubber ring - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68Blu · 07-16-2019, 11:08 AM

Hey guys, I’m in a pickle. Does anyone have the dimensions of the rubber ring (#39) in the upper steering column on a non-tilt wheel? Trying to have one made (long story) but mine is so distorted that we can’t get any good measurements. Thanks

**LockDoc** · 07-16-2019, 12:06 PM

Quote:

Originally Posted by 68Blu

Hey guys, I’m in a pickle. Does anyone have the dimensions of the rubber ring (#39) in the upper steering column on a non-tilt wheel? Trying to have one made (long story) but mine is so distorted that we can’t get any good measurements. Thanks

Not sure if I have one out of a column or not but I will check in a few minutes. There are some good pictures of the parts in this thread (post #14) If someone else has one apart.

http://67-72chevytrucks.com/vboard/s....php?p=4800898

LockDoc

**LockDoc** · 07-16-2019, 01:27 PM

-
I don't find one in my spare parts bins. Maybe someone else will chime in on this.

LockDoc

68Blu · 07-16-2019, 02:00 PM

LockDoc, thanks for trying!

donrolla · 03-02-2020, 10:43 AM

I am in the same boat. My rubber ring is toast and the thrust washer is about the same. I cannot find these parts for sale anywhere. Is there a vendor that I can get these from that anyone is aware of?

toolboxchev · 03-02-2020, 12:38 PM

Yikes, keeping on eye on this one.

68Blu · 03-03-2020, 12:46 AM

I ended up having my Dad make the rubber ring I needed. I do remember seeing a guy on eBay with a NOS plastic thrust washer though. Good luck.

donrolla · 03-03-2020, 11:35 AM

I got both parts on ebay...now I get to see if I can get it all back together properly. The parts I ordered are #3902563 and 3879747. I have a 1971 C20 with non-tilt steering so I will let you know how they work.

Suede53 · 05-07-2020, 10:42 PM

Any updates on this one? Did the ebay part numbers work? Was anyone able to get the dimensions?

I'm in the process of rebuilding my column and the rubber ring was nowhere to be found.

**LockDoc** · 05-07-2020, 10:57 PM

Quote:

Originally Posted by Suede53

Any updates on this one? Did the ebay part numbers work? Was anyone able to get the dimensions?

I'm in the process of rebuilding my column and the rubber ring was nowhere to be found.

Inside diameter is 1 3/8" with a 1/8" thickness. 13/32" tall. There is a shaved area on the outside that is 3/4" long and 1/16" thinner. I will post a picture in a while.

LockDoc

**LockDoc** · 05-07-2020, 11:35 PM

-
Here is a picture. The area between the arrows is 1/16" thinner. If a person could find a piece of an old semi or dump truck mud flap it might work to make one out of. Some of them are pretty thick.

LockDoc

**bigmac73** · 05-08-2020, 07:38 AM

i would check your local industrial gasket or rubber / hydraulic hose supplier and see if they have something that would work
or Grainger.com

Suede53 · 05-08-2020, 08:11 AM

Awesome! It does look like an old mud flap. Thanks for the info. I was trying to guess the sizes from the images but this is very helpful.

Richard2112 · 05-08-2020, 09:50 AM

I made my mud flaps from a rubber material purchased from Tractor Supply. They had rolls of various thickness and the flaps have lasted for years. That might be a source for material if you need to make that ring.

**LockDoc** · 05-08-2020, 11:00 AM

Quote:

Originally Posted by Suede53

Awesome! It does look like an old mud flap. Thanks for the info. I was trying to guess the sizes from the images but this is very helpful.

A guy might be able to use a piece of radiator hose too.

LockDoc

Suede53 · 05-08-2020, 12:31 PM

All good suggestions and much appreciated. I'll rummage through the "spare parts" and see if I can find something.

67/Heaven · 05-08-2020, 01:18 PM

I have these at work we use them as sight glass seals, dimensions are close except for the height (approx 1/4" may be able to glue and stack two of them) 1/8" thick and about 1" ID (stretchable). If you are interested pm me, I am willing to send you two or three if you feel they would work for you, no charge.

Look at this link the height is not included in dimension but a quick call may be able to resolve that

https://www.superiorwasher.com/washe...D_value_+1.375

67/Heaven · 05-08-2020, 05:18 PM

Suede53 received your PM I will be sending you four this evening. You may want to use the handles of some channel lock pliers and leave one or two to stretch overnight. Hope this helps.

**LockDoc** · 05-08-2020, 05:29 PM

Quote:

Originally Posted by 67/Heaven

Suede53 received your PM I will be sending you four this evening. You may want to use the handles of some channel lock pliers and leave one or two to stretch overnight. Hope this helps.

They have to fit over the center part of the white plastic thrust washer so he can use that as a guide. He can warm them up with a heat gun or hair dryer also.

LockDoc

67/Heaven · 05-08-2020, 05:52 PM

LocDoc thx for the dimensions as far as the center goes if needed find someone with a lathe and have one turned from teflon

Suede53 · 05-19-2020, 07:55 PM

Thanks again for everyone's help. I have been busy with some other things so I haven't been able to do much with the washer 67/Heaven sent.

I did contact Superior Washer. They don't have any stock and the minimum order is for 100. The dimensions they gave are 1.687 OD x 1.375 ID x .125 Thick (PN 850-47-125).

07-16-2019, 02:00 PM	#4
68Blu Registered User Join Date: Jun 2019 Location: California Central Coast Posts: 82	Re: Help! Plastic thrust washer and rubber ring LockDoc, thanks for trying!

03-02-2020, 10:43 AM	#5
donrolla Registered User Join Date: May 2017 Location: Lees Summit, MO Posts: 2	Re: Help! Plastic thrust washer and rubber ring I am in the same boat. My rubber ring is toast and the thrust washer is about the same. I cannot find these parts for sale anywhere. Is there a vendor that I can get these from that anyone is aware of?

03-02-2020, 12:38 PM	#6
toolboxchev Registered User Join Date: Jul 2015 Location: 2nd left past the stump on a dirt road. Posts: 2,629	Re: Help! Plastic thrust washer and rubber ring Yikes, keeping on eye on this one.

03-03-2020, 12:46 AM	#7
68Blu Registered User Join Date: Jun 2019 Location: California Central Coast Posts: 82	Re: Help! Plastic thrust washer and rubber ring I ended up having my Dad make the rubber ring I needed. I do remember seeing a guy on eBay with a NOS plastic thrust washer though. Good luck.

03-03-2020, 11:35 AM	#8
donrolla Registered User Join Date: May 2017 Location: Lees Summit, MO Posts: 2	Re: Help! Plastic thrust washer and rubber ring I got both parts on ebay...now I get to see if I can get it all back together properly. The parts I ordered are #3902563 and 3879747. I have a 1971 C20 with non-tilt steering so I will let you know how they work.

07-16-2019, 11:08 AM	#1
68Blu Registered User Join Date: Jun 2019 Location: California Central Coast Posts: 82	Help! Plastic thrust washer and rubber ring Hey guys, I’m in a pickle. Does anyone have the dimensions of the rubber ring (#39) in the upper steering column on a non-tilt wheel? Trying to have one made (long story) but mine is so distorted that we can’t get any good measurements. Thanks Attached Images

07-16-2019, 01:27 PM	#3
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,321	Re: Help! Plastic thrust washer and rubber ring - I don't find one in my spare parts bins. Maybe someone else will chime in on this. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

05-07-2020, 10:42 PM	#9
Suede53 Registered User Join Date: Nov 2017 Location: Canton, OH Posts: 4	Re: Help! Plastic thrust washer and rubber ring Any updates on this one? Did the ebay part numbers work? Was anyone able to get the dimensions? I'm in the process of rebuilding my column and the rubber ring was nowhere to be found.

05-07-2020, 11:35 PM	#11
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,321	Re: Help! Plastic thrust washer and rubber ring - Here is a picture. The area between the arrows is 1/16" thinner. If a person could find a piece of an old semi or dump truck mud flap it might work to make one out of. Some of them are pretty thick. LockDoc Attached Images __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

05-08-2020, 07:38 AM	#12
bigmac73 Senior Member Join Date: Mar 2012 Location: Chesapeake, Va Posts: 1,275	Re: Help! Plastic thrust washer and rubber ring i would check your local industrial gasket or rubber / hydraulic hose supplier and see if they have something that would work or Grainger.com __________________ Mike 72 C-10 Cheyenne off frame resto and Upgraded to 4 wheel disk, Tilt, Dakota Digital Dash / Rear slider. 421 SBC / TH350 3000RPM Stall Progression Ignition /Holley 750 DP/3:73 gear Eaton Limited Slip unit / 2 1/2 exhaust glasspacks

05-08-2020, 08:11 AM	#13
Suede53 Registered User Join Date: Nov 2017 Location: Canton, OH Posts: 4	Re: Help! Plastic thrust washer and rubber ring Awesome! It does look like an old mud flap. Thanks for the info. I was trying to guess the sizes from the images but this is very helpful.

05-08-2020, 09:50 AM	#14
Richard2112 Registered User Join Date: Jul 2014 Location: South East Ohio Posts: 644	Re: Help! Plastic thrust washer and rubber ring I made my mud flaps from a rubber material purchased from Tractor Supply. They had rolls of various thickness and the flaps have lasted for years. That might be a source for material if you need to make that ring. Attached Images

05-08-2020, 12:31 PM	#16
Suede53 Registered User Join Date: Nov 2017 Location: Canton, OH Posts: 4	Re: Help! Plastic thrust washer and rubber ring All good suggestions and much appreciated. I'll rummage through the "spare parts" and see if I can find something.

05-08-2020, 01:18 PM	#17
67/Heaven Registered User Join Date: Dec 2012 Location: Texas Posts: 180	Re: Help! Plastic thrust washer and rubber ring I have these at work we use them as sight glass seals, dimensions are close except for the height (approx 1/4" may be able to glue and stack two of them) 1/8" thick and about 1" ID (stretchable). If you are interested pm me, I am willing to send you two or three if you feel they would work for you, no charge. Look at this link the height is not included in dimension but a quick call may be able to resolve that https://www.superiorwasher.com/washe...D_value_+1.375 Attached Images Last edited by 67/Heaven; 05-08-2020 at 01:51 PM. Reason: update dimensions added a link

05-08-2020, 05:18 PM	#18
67/Heaven Registered User Join Date: Dec 2012 Location: Texas Posts: 180	Re: Help! Plastic thrust washer and rubber ring Suede53 received your PM I will be sending you four this evening. You may want to use the handles of some channel lock pliers and leave one or two to stretch overnight. Hope this helps.



Register or Log In To remove these advertisements.

05-08-2020, 05:52 PM	#20
67/Heaven Registered User Join Date: Dec 2012 Location: Texas Posts: 180	Re: Help! Plastic thrust washer and rubber ring LocDoc thx for the dimensions as far as the center goes if needed find someone with a lathe and have one turned from teflon Last edited by 67/Heaven; 05-08-2020 at 06:00 PM.

05-19-2020, 07:55 PM	#21
Suede53 Registered User Join Date: Nov 2017 Location: Canton, OH Posts: 4	Re: Help! Plastic thrust washer and rubber ring Thanks again for everyone's help. I have been busy with some other things so I haven't been able to do much with the washer 67/Heaven sent. I did contact Superior Washer. They don't have any stock and the minimum order is for 100. The dimensions they gave are 1.687 OD x 1.375 ID x .125 Thick (PN 850-47-125).

Register or Log In To remove these advertisements.