200-4r problems and questions

[Keepitcoastal]

Originally Posted by kaycee

I went through this last spring ,same exact thing u are going through,sent all the TCI ,EDELBROCK brackets back to them.Man I was getting pissed over this double checked all the part #'s and talked to all there tech guys and still could not get 1 to work right.I finnaly caved in and bought the bracket cable assymbly from bowtie overdrive no more freeking guessing if it is right or not.I hated to spend the $$$ on it but man it is well worth it.The problem is the phelonic spacer allso after getting my carb all dialed in I was not about to take it off.

This sucks to hear but atleast I know what to do! Thanks for the help. I'm gonna just go ahead and order the Bowtie kit

[kaycee]

You wont be disappointed,Your pics were a mirror image of what I went through Good luck

[cadillac_al]

This is the way mine was when i got the truck. I have been driving it for 2 years like this. Just the factory bracket and a couple bolts and lock nuts. For a 200r4 you would need the correct stud from Edelbrock. Now if I still remember how to add pics....










As you can see, I have an alignment issue with the th350 kickdown cable but it still works fine. I plan to do something with it in the future.

[Ronald29609]

200 4R-I had to make a hard stop and the engine shook violently. I thought the motor mounts were going to brake. I started driving again and after 40 miles or so I arrived home. The violent shaking was gone but there is still a minor shaking when in gear. It wasn't there before the hard braking incident. Any Ideas? Thanks all for your help. Without this site I wouldn't have my truck.

[donut]

You may want to start a new thread rather than resurrect an old one.

[James the III]

Originally Posted by Keepitcoastal

Wtf!!

I specifically ordered tci relocation bracket for edlebrock carb and 200-4r transmission from TCI directly!

In looking at my receipt now and it says I ordered the parts I needed.

They can't help it if you mount them wrong

[TexasT]

I know this thread is ancient but thought this diagram could help someone who comes on this thread in a search.

[Chevyrestorerman]

Are you the transmission expert on this forum. Looking for someone who knows transmissions for assistance for the future

[TexasT]

I wouldn't call myself an expert, but I do know a few things. I have assembled a 2004r for one of my cars and did a bunch of research on them. I am doing a 4l60e now.

Really just a DIY guy, but I'm happy to help you if I can.
Posted via Mobile Device

[Chevyrestorerman]

I am changing my T350 to a 700r4 transmission at the moment. I have done this a few times, just looking for others who have done it as well