The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 12-02-2018, 02:36 PM   #1
Big Blue
Registered User
 
Big Blue's Avatar
 
Join Date: Feb 2005
Location: Northeast--Bethlehem, Pennslyvania
Posts: 574
What Size Are These????

I'am about to put back the evap or canister. My question is what size nuts are these, STD or Metric ? I can not find them in my pile of stuff. I only started about 5 or 6 years ago with this project. It is on an 87 rad. support.


John
Attached Images
  
__________________
Big Blue ( John )
79 Chevy Pick up.....My Dailey


STILL Working on a frame up: 1987 Truck body on a 78 Blazer frame. Need cab blasted to start project. Got the cab BLASTED, Now Prep and Paint. Started to lay SOME BONDO and primer. Done, Ordering paint. Got paint, Stuff painted,Cab,Fenders, Hood more later. 9/7/2015 Got the clear coat on,now time to take one off. Started to put things back (What a nightmare) like the heating and AC stuff,inside wire harness, outside AC unit and booster, still more. May 2016, still working on the inside. Got duck work in,heating and AC. Radio (stock) in dash with after market in console later, Speaker are hooked up, Steering column is in. Getting ready to drop the cab onto the frame, Working on engine now since I have the room. Well here it is 2018, got the engine in and it runs, now I need to get the exhaust system in so I can adjust the lifters, to loud right now.
Big Blue is offline   Reply With Quote
Old 12-02-2018, 06:30 PM   #2
Big Blue
Registered User
 
Big Blue's Avatar
 
Join Date: Feb 2005
Location: Northeast--Bethlehem, Pennslyvania
Posts: 574
Re: What Size Are These????

Someone has to know,we all have this in our trucks.

John
__________________
Big Blue ( John )
79 Chevy Pick up.....My Dailey


STILL Working on a frame up: 1987 Truck body on a 78 Blazer frame. Need cab blasted to start project. Got the cab BLASTED, Now Prep and Paint. Started to lay SOME BONDO and primer. Done, Ordering paint. Got paint, Stuff painted,Cab,Fenders, Hood more later. 9/7/2015 Got the clear coat on,now time to take one off. Started to put things back (What a nightmare) like the heating and AC stuff,inside wire harness, outside AC unit and booster, still more. May 2016, still working on the inside. Got duck work in,heating and AC. Radio (stock) in dash with after market in console later, Speaker are hooked up, Steering column is in. Getting ready to drop the cab onto the frame, Working on engine now since I have the room. Well here it is 2018, got the engine in and it runs, now I need to get the exhaust system in so I can adjust the lifters, to loud right now.
Big Blue is offline   Reply With Quote
Old 12-02-2018, 07:11 PM   #3
4x4k30
Registered User
 
4x4k30's Avatar
 
Join Date: Jun 2003
Location: ga
Posts: 580
Re: What Size Are These????

metric 13 mm wrench
__________________
4x4k30 if trouble was money i would have plenty
4x4k30 is offline   Reply With Quote
Old 12-02-2018, 08:29 PM   #4
Big Blue
Registered User
 
Big Blue's Avatar
 
Join Date: Feb 2005
Location: Northeast--Bethlehem, Pennslyvania
Posts: 574
Re: What Size Are These????

Thank You 4x4k30, I knew someone had an answer. Thanks Again, John
__________________
Big Blue ( John )
79 Chevy Pick up.....My Dailey


STILL Working on a frame up: 1987 Truck body on a 78 Blazer frame. Need cab blasted to start project. Got the cab BLASTED, Now Prep and Paint. Started to lay SOME BONDO and primer. Done, Ordering paint. Got paint, Stuff painted,Cab,Fenders, Hood more later. 9/7/2015 Got the clear coat on,now time to take one off. Started to put things back (What a nightmare) like the heating and AC stuff,inside wire harness, outside AC unit and booster, still more. May 2016, still working on the inside. Got duck work in,heating and AC. Radio (stock) in dash with after market in console later, Speaker are hooked up, Steering column is in. Getting ready to drop the cab onto the frame, Working on engine now since I have the room. Well here it is 2018, got the engine in and it runs, now I need to get the exhaust system in so I can adjust the lifters, to loud right now.
Big Blue is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:21 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com